Speakman SA-2205 Installation guide

Type
Installation guide

This manual is also suitable for

Speakman SA-2205 is a towel rack designed for years of trouble-free performance. It is easy to install and maintain, and it comes with a variety of mounting options to suit your needs. The SA-2205 is made of durable materials and is backed by a warranty.

Here are some of the features and benefits of the Speakman SA-2205:

  • Easy to install: The SA-2205 comes with all the necessary hardware and instructions for quick and easy installation.
  • Versatile mounting options: The SA-2205 can be mounted directly to wood studs or with plastic anchors for added support.
  • Durable construction: The SA-2205 is made of high-quality materials that are built to last.

Speakman SA-2205 is a towel rack designed for years of trouble-free performance. It is easy to install and maintain, and it comes with a variety of mounting options to suit your needs. The SA-2205 is made of durable materials and is backed by a warranty.

Here are some of the features and benefits of the Speakman SA-2205:

  • Easy to install: The SA-2205 comes with all the necessary hardware and instructions for quick and easy installation.
  • Versatile mounting options: The SA-2205 can be mounted directly to wood studs or with plastic anchors for added support.
  • Durable construction: The SA-2205 is made of high-quality materials that are built to last.
INSTRUCTIONS FOR MODELS
92-SA-2200-01
For additional assistance or service please contact:
SPEAKMAN
®
Company
400 Anchor Mill Road
New Castle, DE 19720
800-537-2107
www.speakman.com
SA-2203 TOWEL RACK
SA-2204 7” TOWEL BAR
SA-2205 PAPER HOLDER
SA-2206 ROBE HOOK
SA-2207 24” TOWEL BAR
TOOLS AND SUPPLIES
Phillips
Screwdriver
Pencil
Drill Tile Drill Bit
ؼ”
Drill Bit
ؼ”
Level Hex Key
(included)
Hammer
Additional warranty information can be found at:
www.speakman.com
WARRANTY
MAINTENANCE
Cover your drain to prevent loss of parts.
SAFETY TIPS
IMPORTANT
• Be sure to read instructions thoroughly before
beginning installation.
• Do not over-tighten any connections or damage
may occur.
Your new Speakman Product is designed for years of
trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. The use of harsh
chemicals and abrasives on any of the Speakman custom
finish products may damage the finish and void the
product warranty. Please be sure to only use approved
cleaners. Please contact Speakman for any clarification
of acceptable cleaners.
1
The Mounting Plate (1) comes pre-installed
in the Accessory (2). Remove the Mounting
Plate(s) by loosening the pre-installed set
screw at bottom with the included Hex Key.
2
At the selected height, mark center point of
mounting locations onto wall referencing
the rough in diagram.
3
Align Mounting Plate over center point marked
in previous step. Mounting Plate should be
vertical with Notch in the cylinder (1) pointing to
the bottom as shown below. Mark Mounting
Screw locations onto the wall surface. Remove
items after marking mounting locations.
4
If mounting directly to wood stud, Plastic
Anchors are not required. If using anchors,
select proper drill bit for mounting location.
Drill ¼” holes in marked locations.
ؼ”
OR
5
Insert Plastic Anchors into drilled holes and
tap lightly with Hammer to fully seat Plastic
Anchor into the hole.
6
Secure Mounting Plate with the Mounting
Screws provided. Verify that the Mounting
Plate is aligned vertically.
7
Place Accessory (1) over Mounting Bracket
and secure the pre-installed set screw (2)
with the included Hex Key.
SA-2203
24"
610mm
SA-2204
SA-2205
SA-2206
SA-2207
2in
52mm
24"
610mm
ROUGH-IN DIAGRAMS
SPEAKMAN
®
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
26
1
16
"
662mm
10
1
16
"
255mm
4
3
16
"
106mm
9
5
16
"
237mm
2
3
4
"
70mm
2
1
16
"
52mm
7
5
16
"
185mm
11
16
"
18mm
7
5
8
"
193mm
5
16
"
8mm
2
3
4
"
70mm
1
4
"
7mm
3
8
"
10mm
2
3
16
"
56mm
11
16
"
18mm
3
8
"
10mm
2
3
4
"
70mm
26
1
16
"
662mm
2
3
4
"
70mm
  • Page 1 1
  • Page 2 2

Speakman SA-2205 Installation guide

Type
Installation guide
This manual is also suitable for

Speakman SA-2205 is a towel rack designed for years of trouble-free performance. It is easy to install and maintain, and it comes with a variety of mounting options to suit your needs. The SA-2205 is made of durable materials and is backed by a warranty.

Here are some of the features and benefits of the Speakman SA-2205:

  • Easy to install: The SA-2205 comes with all the necessary hardware and instructions for quick and easy installation.
  • Versatile mounting options: The SA-2205 can be mounted directly to wood studs or with plastic anchors for added support.
  • Durable construction: The SA-2205 is made of high-quality materials that are built to last.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI