FORM NO. 3321-567
INSTALLATION
INSTRUCTIONS
PART NO. 99-3716 and 99–3717
FUEL SHUT-OFF VALVE KIT
for GARDEN TRACTORS ONLY
Note: Use the following instructions only when installing these valves on Garden Tractors.
Install Fuel Shut–Off Valve
1. Drain fuel from tank into an approved container.
Refer to: tractor Operator’s Manual.
2. Loosen, but do not remove, screw clamp on tank
nipple (Fig. 2). Unscrew existing fuel valve and
discard (Fig. 1).
3. Clean and dry threads on new valve and in fuel
tank (Fig. 1).
4. Apply thread sealant to new fuel valve threads.
Use Permatex Aviation Form-A-Gasket #3H or
equivalent.
Note: Apply thread sealant sparingly and
only to threads.
5. Install new fuel valve and locate as shown, 20°
left from center of tractor (Fig. 1).
m–3985
3
2
1
Bottom View of Tank
Figure 1
1. Fuel tank
2. Fuel valve
3. 20° from center
6. Tighten screw clamp around tank nipple (Fig. 2).
7. Push fuel hose onto barbed end of fuel valve and
secure with hose clamp (Fig. 2).
m–3984
3
2
1
4
Figure 2
1. Screw clamp
2. Fuel valve
3. Fuel hose
4. Hose clamp
-
1
Toro Fuel Shut-Off Valve Kit, For 5xi GT Tractor (diesel) Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Toro 410 Garden Tractor User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Craftsman 917255915 Owner's manual
-
Sears 917.25254 User manual
-
Sears 917.25156 User manual
-
-
-
Husqvarna 917.28961 User manual
-
-
-
-