2. Mircom
  3. LT-6046 DO-CR3

Mircom LT-6046 DO-CR3 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Mircom LT-6046 DO-CR3 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DO-CR3 Post Office Lock Adapter Installation Instructions Version 1.0
Copyright 2012 LT-6046
DO-CR3 Post Office Lock Adapter Installation Instructions
DO-CR3 Post Office Lock Adapter
Installation Instructions
OPERATION
The DO-CR3 Post Office Lock Adapter permits the postal worker to use their key
to enter the building (when used with Post Office supplied lock).
INSTALLATION
1. Place the Postal Lock into the Postal Lock Chassis and secure it with the four
#8-32 nuts provided. Ensure that it will engage the Postal Lock Switch.
2. Connect the 2 wires (22 AWG) from the Postal Lock Switch to the access
control unit (See the control unit’s documentation for instructions).
3. Use four screws to secure the Postal Lock Chassis assembly to the wall.
Four Screws
(Not Included)
Four #8-32 Nuts
(Included)
Postal Lock
Postal Lock Chassis
Postal Lock
Switch
22 AWG Wires to
Access Control Unit
/