Home Styles 5601-3758 User guide

Brand: Home Styles

Model: 5601-3758

Type: User guide

This manual is also suitable for

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Hardware List

Tools required for assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

[email protected]

Swivel Chair

88 5 8601 1

M6x50

Head Cap Bolt

(50mm)

4pcs.(+1 extra)

Spring Washer

9 pcs.(+1 extra)

Flat Washer

13 pcs.(+1 extra)

Hex Wrench

1 pc.

85M6x

Head Cap Bolt

(85mm)

4 pcs.(+1 extra)

45Mx4

Wood Screw

8 pcs.(+1 extra)

20M6x

Head Cap Bolt

(20mm)

4 pcs.(+1 extra)

Small

Hex Wrench

1 pc.

Seat

1 pc.

Back Frame

.1 pc

Side Stretcher

2 pcs.

Arm

1 pc.

Leg

2 pcs.

Leg

2 pcs.

Arm

1 pc.

Base

1 pc.

Side Stretcher

2 pcs.

M6x40

Head Cap Bolt

(40mm)

7 pcs.(+1 extra)

Assembly Instructions 2/4

IMPORTANT

* Do not tighten up all the screws until each part is properly assembled.

* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.

STEP 1

Attach Stretchers (G) to Legs (E) and (F).

Figure 1

Head Cap Bolt (50mm)

STEP 2

Attach one leg unit to Base (I)

with Head Cap Bolts (50mm).

(see Figure 1)

Attach Stretchers (H) to base unit.

Attach the other leg unit to base

unit with Head Cap Bolts (50mm).

Assembly Instructions 3/4

STEP 4

Turn Seat (A) upside down.

Attach Back Frame (D) to Seat (A)

with Flat Washers, Spring Washers,

Head Cap Bolts (85mm) and Head

Cap Bolt (40mm). (see Figure 3)

Attach Arms (B) and (C) to unit with

Flat Washers, Spring Washers and

Head Cap Bolts (40mm). (see Figure 4)

STEP 3

Turn the base unit upside down.

Insert Wood Screws and tighten.

(see Figure 2)

Head Cap Bolt (85mm)

Flat Washer

Spring Washer

Figure 3

Figure 2

Figure 4

Wood Screw

Head Cap Bolt (40mm)

Flat Washer

Spring Washer

Flat Washer

Spring Washer

Assembly Instructions 4/4

STEP 6

Place the base unit onto the top unit and

attach it with Flat Washers and Head Cap

Bolts (20mm). (see Figure 6)

STEP 5

Rotate the swivel plate. (see Figure 5)

Figure 6

Figure 5

Flat Washer

Head Cap Bolt (20mm)

Home Styles 5601-3758 User guide

Brand: Home Styles

Model: 5601-3758

Type: User guide

This manual is also suitable for

Download PDF

report

Home Styles 5601-3758 User guide

This manual is also suitable for

Home Styles 5601-3758 User guide

Related papers

Other documents