Construction Metals 02125 Operating instructions

Type
Operating instructions

This manual is also suitable for

GALVANIZED RIDGE CAP #RC-2GM
Ridge Cap Ridge flashing for metal roofing and shingle roofs hips & ridges
Material: Ridge Caps are made from galvanized coated steel for added corrosion protection.
Manufactured to last the life of the structure.
Installation: The Gibraltar ridge cap is placed on top of pre-glued closure strips (outside). A
strip of butyl tape is applied to the closure strip to improve weather tightness. The ridge cap is
fastened by # 9 x 1 ½" metal roofing screws, in an opposing manor, directly across from each
other into the high rib of the panel approx. 6" O.C.
10' lengths. 10 per bundle.
The ridge cap provides a crisp, classic look and a reliable reputation for shedding rain water.
INSTALLATION GUIDELINES
These installation guidelines are for use with typical or standard applications. Refer to SM-Rib installation guide for panel and flashing install details. It is
always recommended to seek advice from a licensed professional, and to check with your local building inspector or building permit office for approvals and
possible variations that may apply.
CAUTION!
Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and eye protection are absolutely required.
4 ⁄ in.
10.48 cm
Varies
Slope 3/12 or greater
1 ⁄ in.
3.49 cm
⁄ in.
2.22 cm
½ in.
1.27 cm
135°
  • Page 1 1

Construction Metals 02125 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI