Electrolux EFC90500K User manual

Category
Cooker hoods
Type
User manual

This manual is also suitable for

EFC 60500
EFC 90500
Benutzerinformation
Gebruiksaanwijzing
Notice d'utilisation
User manual
electrolux 55electrolux 55
electrolux 55electrolux 55
electrolux 55
GB
WW
WW
W
elcome to the world of Electrelcome to the world of Electr
elcome to the world of Electrelcome to the world of Electr
elcome to the world of Electr
oluxolux
oluxolux
olux
Thank you for choosing a first class
product from Electrolux, which
hopefully will provide you with lots of
pleasure in the future. The Electrolux
ambition is to offer a wide variety of
quality products that make your life
more comfortable. You find some
examples on the cover in this manual.
Please take a few minutes to study this
manual so that you can take advantage
of the benefits of your new machine.
We promise that it will provide a
superior user experience delivering
ease of mind.
Good luck!
5656
5656
56
electr electr
electr electr
electr
oluxolux
oluxolux
olux contents
GB
Contents
Safety warnings .............................. 57
Description of the Appliance ........... 59
Control Panel ................................. 60
Maintenance and Care ................... 62
Special accessories ........................ 66
Something Not Working ................. 66
Installation ...................................... 67
The following symbols are used in this user manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
General information and tips.
Environmental information.
electroluxelectrolux
electroluxelectrolux
electrolux
safety warnings
5757
5757
57
GB
Safety warnings
sion or have been trained in the use
of the appliance by a person respon-
sible for their safety.
This appliance is designed to be
operated by adults, children should
be monitored to ensure that they do
not play with the appliance.
This appliance is designed to be
operated by adults. Children should
not be allowed to tamper with the
controls or play with the appliance.
Never use the hood without effec-
tively mounted grating!
The hood must NEVER be used as a
support surface unless specifically
indicated.
The premises where the appliance is
installed must be sufficiently venti-
lated, when the kitchen hood is used
together with other gas combustion
devices or other fuels.
The ducting system for this appliance
must not be connected to any
existing ventilation system which is
being used for any other purpose
such as discharging exhaust fumes
from appliances burning gas or other
fuels.
The flaming of foods beneath the
hood itself is severely prohibited.
The use of exposed flames is detri-
mental to the filters and may cause a
fire risk, and must therefore be
avoided in all circumstances.
Any frying must be done with care in
order to make sure that the oil does
not overheat and ignite.
Accessible parts may become hot
when used with cooking appliances.
Any installation work must be under-
taken by a qualified electrician or a
competent person.
This hood must be installed in
accordance with the installation
instructions and all measurements
must be adhered to.
When used as an extractor unit, the
hood must be fitted with a hose
having preferably the same diameter
as the outlet hole.
Attention: The hose is not suppliedAttention: The hose is not supplied
Attention: The hose is not suppliedAttention: The hose is not supplied
Attention: The hose is not supplied
and must be purand must be pur
and must be purand must be pur
and must be pur
chased separatelychased separately
chased separatelychased separately
chased separately
..
..
.
The minimum distance between the
supporting surface for the cooking
vessels on the hob and the lowest
part of the range hood must be not
less than
50cm50cm
50cm50cm
50cm from electric cookers
and
65cm65cm
65cm65cm
65cm from gas or mixed cook-
ers.
If the instructions for installation for
the gas hob specify a greater dis-
tance, this must be adhered to.
Before any cleaning or maintenance
operation, disconnect hood from the
mains by removing the plug or
disconnecting the mains electrical
supply.
Always wear work gloves for all
installation and maintenance opera-
tions.
The appliance is not intended for use
by children or persons with impaired
physical, sensorial or mental faculties,
or if lacking in experience or knowl-
edge, unless they are under supervi-
5858
5858
58
electr electr
electr electr
electr
oluxolux
oluxolux
olux safety warnings
GB
With regards to the technical and
safety measures to be adopted for
fume discharging it is important to
closely follow the regulations pro-
vided by the authorised authorities.
The hood must be regularly cleaned
on both the inside and outside (AT
LEAST ONCE A MONTH).
This must be completed in accord-
ance with the maintenance instruc-
tions provided in this manual). Failure
to follow the instructions provided in
this user guide regarding the cleaning
of the hood and filters will lead to the
risk of fires.
Do not use or leave the hood without
the lamp correctly mounted due to
the possible risk of electric shocks.
We will not accept any responsibility
for any faults, damage or fires caused
to the appliance as a result of the
non-observance of the instructions
included in this manual.
This appliance is marked according to
the European directive 2002/96/EC on
Waste Electrical and Electronic Equip-
ment (WEEE).
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environ-
ment and human health, which could
otherwise be caused by inappropriate
waste handling of this product.
The symbol on the product, or on
the documents accompanying the
product, indicates that this appliance
may not be treated as household
waste. Instead it should be taken to the
appropriate collection point for the
recycling of electrical and electronic
equipment.
Disposal must be carried out in accord-
ance with local environmental regula-
tions for waste disposal.
For more detailed information about
treatment, recovery and recycling of
this product, please contact your local
authority.
electrolux electrolux
electrolux electrolux
electrolux description of the appliance
5959
5959
59
GB
Description of the Appli-
ance
The cooker hood is designed toThe cooker hood is designed to
The cooker hood is designed toThe cooker hood is designed to
The cooker hood is designed to
extract unpleasant odours frextract unpleasant odours fr
extract unpleasant odours frextract unpleasant odours fr
extract unpleasant odours fr
om theom the
om theom the
om the
kitchen, it will not extract steam.kitchen, it will not extract steam.
kitchen, it will not extract steam.kitchen, it will not extract steam.
kitchen, it will not extract steam.
The hood is supplied in recirculation
filter version (activated charcoal filter
supplied) but it can be used, remov-
ing the activated charcoal filter, in the
venting version.
Extraction modeExtraction mode
Extraction modeExtraction mode
Extraction mode
In this mode fumes are extracted to
the outside via a
hosehose
hosehose
hose connected to
the
coupling ringcoupling ring
coupling ringcoupling ring
coupling ring.
In order to obtain the best perform-
ance the hose should have a diam-
eter equal to the outlet hole.
RecirRecir
RecirRecir
Recir
culation modeculation mode
culation modeculation mode
culation mode
The air is filtered through a
charchar
charchar
char
coalcoal
coalcoal
coal
filterfilter
filterfilter
filter and returned to the kitchen.
You will need an original charcoal
filter for the recirculation mode. (See
Special Accessories).
RecirRecir
RecirRecir
Recir
culation modeculation mode
culation modeculation mode
culation mode
Extraction modeExtraction mode
Extraction modeExtraction mode
Extraction mode
6060
6060
60
electr electr
electr electr
electr
oluxolux
oluxolux
olux control panel
GB
Control Panel
Best results are obtained by using a low speed for normal conditions and a high
speed when odours are more concentrated.
Turn the hood on a few minutes before you start cooking.
The hood should be left on after cooking for about 15 minutes or until all the
odours have disappeared.
The cooker hood is fitted with a sensor which, in the event of extreme variations
in temperature, switches the appliance on automatically until the temperature of
the environment surrounding the hood has been significantly reduced.
The control switches are located on the unit’s front panel:
11
11
1
Motor ON/OFF buttonMotor ON/OFF button
Motor ON/OFF buttonMotor ON/OFF button
Motor ON/OFF button
By pressing the button, the hood starts at speed 1.
Pressing the button (OFF) while the hood is in function turns the latter off.
22
22
2
Speed incrSpeed incr
Speed incrSpeed incr
Speed incr
ease buttonease button
ease buttonease button
ease button
By pressing the button, the hood starts at speed 1.
Pressing the button (while the hood is on) modifies the motor speed:
Speed 1: Speed 1:
Speed 1: Speed 1:
Speed 1: the number "
11
11
1" appears on the display
Speed 2:Speed 2:
Speed 2:Speed 2:
Speed 2: the number "
22
22
2" appears on the display
Speed 3:Speed 3:
Speed 3:Speed 3:
Speed 3: the number "
33
33
3" appears on the display
High-speed: the number "4" appears (flashing) on the display
The high-speed function is regulated by a timer. The standard time setting is 5',
at the end of which the hood adjusts to speed 2.
Press button
22
22
2 to deactivate this function before the set time expires; the hood
will adjust to speed 1. Press button
11
11
1 to turn the hood off.
33
33
3
Lights ON/OFF buttonLights ON/OFF button
Lights ON/OFF buttonLights ON/OFF button
Lights ON/OFF button
44
44
4
Speed timer buttonSpeed timer button
Speed timer buttonSpeed timer button
Speed timer button
55
55
5
DisplayDisplay
DisplayDisplay
Display
12 5 34
electrolux electrolux
electrolux electrolux
electrolux control panel
6161
6161
61
GB
Speed timer buttonSpeed timer button
Speed timer buttonSpeed timer button
Speed timer button
Press button "
44
44
4" to activate the speed
timer; the hood turns off once the set
time expires.
The timer functions in the following
way:
Speed 1Speed 1
Speed 1Speed 1
Speed 1 - 20 minutes (the number
"
11
11
1" and a small flashing LED light
appear on the display)
Speed 2Speed 2
Speed 2Speed 2
Speed 2 - 15 minutes (the number
"
22
22
2" and a small flashing LED light
appear on the display)
Speed 3Speed 3
Speed 3Speed 3
Speed 3 - 10 minutes (the number
"
33
33
3" and a small flashing LED light
appear on the display)
High-speedHigh-speed
High-speedHigh-speed
High-speed - 5 minutes (the number
"
44
44
4" and a small flashing LED light
appear on the display)
Press button
11
11
1 or button
4 4
4 4
4 to turn the
hood off while the speed timer is in
function; by pressing button
22
22
2, the
hood returns to the set speed.
GrGr
GrGr
Gr
ease filter indicatorease filter indicator
ease filter indicatorease filter indicator
ease filter indicator
After 80 hours of operation, the
number "
11
11
1" starts flashing on the
display.
Press and hold button
11
11
1 or 3 to reset
the indicator.
Carry out maintenance on the grease
filter according to the indications of this
manual.
Charcoal filter indicator
After 320 hours of operation, the
number "2" starts flashing on the
display.
Press and hold button
11
11
1 or
33
33
3 to reset
the indicator.
Carry out maintenance on the charcoal
filter according to the indications of this
manual.
When both filter signals appear simulta-
neously, numbers "1" and "2" will
alternately flash on the display.
Reset the indicator by performing the
above-mentioned procedure twice.
The first operation resets the grease
filter indicator, while the second opera-
tion resets the charcoal filter indicator.
The charcoal filter indicator is not active
in the standard mode.
If the hood is used in the recirculation
mode, the charcoal filter indicator must
be activated.
Perform the following steps to activatePerform the following steps to activate
Perform the following steps to activatePerform the following steps to activate
Perform the following steps to activate
the charthe char
the charthe char
the char
coal filter indicator:coal filter indicator:
coal filter indicator:coal filter indicator:
coal filter indicator:
Turn the hood off and keep buttons
2 2
2 2
2
and
33
33
3 pressed for 3".
The numbers "1" and "2" will flash for
2" once the function has been acti-
vated.
Charcoal filter indicator deactivation:
Turn the hood off and keep buttons
11
11
1
and
22
22
2 pressed for 3".
The number "1" will flash for 2" to
indicate that the function has been
deactivated.
6262
6262
62
electr electr
electr electr
electr
oluxolux
oluxolux
olux maintenance and care
GB
Maintenance and Care
BeforBefor
BeforBefor
Befor
e performing any maintenance operation, isolate the hood fre performing any maintenance operation, isolate the hood fr
e performing any maintenance operation, isolate the hood fre performing any maintenance operation, isolate the hood fr
e performing any maintenance operation, isolate the hood fr
om theom the
om theom the
om the
electrical supply by switching ofelectrical supply by switching of
electrical supply by switching ofelectrical supply by switching of
electrical supply by switching of
f at the connector and rf at the connector and r
f at the connector and rf at the connector and r
f at the connector and r
emoving the connectoremoving the connector
emoving the connectoremoving the connector
emoving the connector
fuse.fuse.
fuse.fuse.
fuse.
Or if the appliance has been connected thrOr if the appliance has been connected thr
Or if the appliance has been connected thrOr if the appliance has been connected thr
Or if the appliance has been connected thr
ough a plug and socket, then theough a plug and socket, then the
ough a plug and socket, then theough a plug and socket, then the
ough a plug and socket, then the
plug must be rplug must be r
plug must be rplug must be r
plug must be r
emoved fremoved fr
emoved fremoved fr
emoved fr
om the socket.om the socket.
om the socket.om the socket.
om the socket.
When washing the metal grease filter
in the dishwasher a slight
discolouration of the filter can occur,
this does not have any impact on its
performance.
Never use corrosive, abrasive or
flammable cleaning products or
products containing bleach.
Metal grMetal gr
Metal grMetal gr
Metal gr
ease filterease filter
ease filterease filter
ease filter
The purpose of the grease filters is to
absorb grease particles which form
during cooking and it
mustmust
mustmust
must always be
used, either in the external extraction
or internal re-circulation function.
Attention:Attention:
Attention:Attention:
Attention: the metal grease filters
must be removed and washed, either
by hand or in the dishwasher, every
four weeks.
Removing the metal grRemoving the metal gr
Removing the metal grRemoving the metal gr
Removing the metal gr
ease filterease filter
ease filterease filter
ease filter
Use the spring handle and remove
the filter downward.
Hand washingHand washing
Hand washingHand washing
Hand washing
Soak grease filters for about one hour
in hot water with a grease-loosening
cleaner, then rinse off thoroughly with
hot water. Repeat the process if
necessary. Refit the grease filters
when they are dry.
DishwasherDishwasher
DishwasherDishwasher
Dishwasher
Place grease filters in the dishwasher.
Select most powerful washing
programme and highest temperature,
at least 65°C. Repeat the process.
Refit the grease filters when they are
dry.
electrolux electrolux
electrolux electrolux
electrolux maintenance and care
6363
6363
63
GB
CharChar
CharChar
Char
coal filtercoal filter
coal filtercoal filter
coal filter
The charcoal filter should only be
used if you want to use the hood in
recirculation mode.
To do this you will need an original
charcoal filter (available from your
local Service Force Centre).
Replacing the charReplacing the char
Replacing the charReplacing the char
Replacing the char
coal filtercoal filter
coal filtercoal filter
coal filter
The charcoal filter cannot be washed
nor regenerated.
The charcoal filter should be replaced
every 4 months under normal use.
Replacement filters are available from
your local Service Force Centre.
FittingFitting
FittingFitting
Fitting
Position the carbon filter inside the
hood to cover the protection grill of
the motor.
Fix the filter with 2 lateral knobs.
TT
TT
T
o ro r
o ro r
o r
emoveemove
emoveemove
emove proceed in the reverse
order.
Always specify the hood model
number, serial number and product
number code when ordering replace-
ment filters. This information is shown
on the rating plate located on the
inside of the unit.
The charcoal filter can be ordered
from your local Service Force Centre.
6464
6464
64
electr electr
electr electr
electr
oluxolux
oluxolux
olux maintenance and care
GB
WW
WW
W
arar
arar
ar
ningning
ningning
ning
Failure to observe the instructions on
cleaning the unit and changing the
filters will cause a fire hazard. You are
therefore strongly recommended to
follow these instructions.
The manufacturer declines all respon-
sibility for any damage to the motor
or any fire damage linked to inappro-
priate maintenance or failure to
observe the above safety recommen-
dations.
Changing the light bulb(s)Changing the light bulb(s)
Changing the light bulb(s)Changing the light bulb(s)
Changing the light bulb(s)
Disconnect the cooker hood frDisconnect the cooker hood fr
Disconnect the cooker hood frDisconnect the cooker hood fr
Disconnect the cooker hood fr
omom
omom
om
the mains supplythe mains supply
the mains supplythe mains supply
the mains supply
..
..
.
Prior to touching the light bulbsPrior to touching the light bulbs
Prior to touching the light bulbsPrior to touching the light bulbs
Prior to touching the light bulbs
ensurensur
ensurensur
ensur
e they have cooled down.e they have cooled down.
e they have cooled down.e they have cooled down.
e they have cooled down.
Remove the damaged lamp.
Replace the old bulb with a new one
of the same type.
If the light does not come on, make
sure the bulb has been inserted in
correctly before contacting your local
Service Force Centre.
electrolux electrolux
electrolux electrolux
electrolux maintenance and care
6565
6565
65
GB
Cleaning the hoodCleaning the hood
Cleaning the hoodCleaning the hood
Cleaning the hood
Clean the outside of the hood using a
damp cloth and a solution of water
and mild washing up liquid.
Never use corrosive, abrasive or
flammable cleaning products or
products containing bleach.
Never insert pointed objects in the
motor’s protective grid.
Only ever clean the switch panel and
filter grill using a damp cloth and mild
washing up liquid.
Clean all the plastic parts with a soft
cloth soaked in warm water and
neutral soap.
It is extremely important to clean the
unit and change the filters at the
recommended intervals. Failure to do
so will cause grease deposits to build
up that could constitute a fire hazard.
6666
6666
66
electr electr
electr electr
electr
oluxolux
oluxolux
olux special accessories
GB
Special accessoriesSpecial accessories
Special accessoriesSpecial accessories
Special accessories
CharChar
CharChar
Char
coal filtercoal filter
coal filtercoal filter
coal filter Type 15
Something Not Working
If your appliance fails to work properly please carry out the following checks.
SymptomSymptom
SymptomSymptom
Symptom
The cooker hood will not start...
The cooker hood is not working
The cooker hood has switched off
during operation...
SolutionSolution
SolutionSolution
Solution
Check that: Check that:
Check that: Check that:
Check that: The hood is connected
to the electricity supply.
Check that a fan speed has been
selected.
Check that: Check that:
Check that: Check that:
Check that: The fan speed is set high
enough for the task.
The grease filters are clean.
The kitchen is adequately vented to
allow the entry of fresh air.
If set up for recirculation, check that
the charcoal filter is still effective.
If set up for extraction, check that the
ducting and outlets are not blocked.
The safety cut-out device has been
tripped. Turn off the hob and then
wait for the device to reset. If the
hood has been installed below the
heights indicated in the installation
instructions the motor will cut-out
frequently which will damage the
hood.
If after all these checks, the problem persists, contact your local Service Centre,
quoting the model number, serial number and product number code.
Please note that it will be necessary to provide proof of purchase for any in-
guarantee service calls.
In-guarantee customers should ensure that the above checks have been made as
the engineer will make a charge if the fault is not a mechanical or electrical break-
down.
electrolux electrolux
electrolux electrolux
electrolux installation
6767
6767
67
GB
Installation
TT
TT
T
echnical Detailsechnical Details
echnical Detailsechnical Details
echnical Details
EFC 60500EFC 60500
EFC 60500EFC 60500
EFC 60500
EFC 90500EFC 90500
EFC 90500EFC 90500
EFC 90500
Dimensions (in cm):Dimensions (in cm):
Dimensions (in cm):Dimensions (in cm):
Dimensions (in cm):
Height: 76,6-121,3 76,6-121,3
Width: 59,8 89,8
Depth: 50 50
Max. absorb. power:Max. absorb. power:
Max. absorb. power:Max. absorb. power:
Max. absorb. power:
200 W200 W
200 W200 W
200 W
290 W290 W
290 W290 W
290 W
Motor: 170 W 250 W
Lighting: 2 x 20 W (12V-G4) 2 x 20 W (12V-G4)
Length of the cable:Length of the cable:
Length of the cable:Length of the cable:
Length of the cable:
150 cm150 cm
150 cm150 cm
150 cm
150 cm150 cm
150 cm150 cm
150 cm
Electrical connection:Electrical connection:
Electrical connection:Electrical connection:
Electrical connection:
220-240 V220-240 V
220-240 V220-240 V
220-240 V
220-240 V220-240 V
220-240 V220-240 V
220-240 V
Fuse rating:Fuse rating:
Fuse rating:Fuse rating:
Fuse rating:
5At5At
5At5At
5At
5At5At
5At5At
5At
Mounting accessories includedMounting accessories included
Mounting accessories includedMounting accessories included
Mounting accessories included
22
22
2 screwdriver inserts (to tighten torx screws)
11
11
1 coupling ring
11
11
1 deflector
11
11
1 chimney bracket
66
66
6 Ø 8 mm dowels (for fixing the hood to the wall)
66
66
6 5 x 45 screws (for fixing the hood to the wall)
22
22
2 washers
44
44
4 screws 2,9 x 6,5 (for fixing the deflector and the chimney to the wall)
22
22
2 screws 3,5 x 9,5 (for fixing the coupling ring)
1 1
1 1
1 power supply cable
6868
6868
68
electr electr
electr electr
electr
oluxolux
oluxolux
olux installation
GB
Electrical connection
Safety warSafety war
Safety warSafety war
Safety war
nings for the electriciannings for the electrician
nings for the electriciannings for the electrician
nings for the electrician
The mains power supply must corre-
spond to the rating indicated on the
plate situated inside the hood. If
provided with a plug connect the hood
to a socket in compliance with current
regulations and positioned in an
accessible area. If it not fitted with a
plug (direct mains connection) or if the
plug is not located in an accessible
area apply a double pole switch in
accordance with standards which
assures the complete disconnection of
the mains under conditions relating to
over-current category III, in accordance
with installation instructions.
WW
WW
W
arar
arar
ar
ning! ning!
ning! ning!
ning! Before re-connecting the
hood circuit to the mains supply and
checking the efficient function, always
check that the mains cable is correctly
assembled.
electrolux electrolux
electrolux electrolux
electrolux installation
6969
6969
69
GB
= =
Ø 8
Ø 8
5x45
Ø 8
InstallationInstallation
InstallationInstallation
Installation
WW
WW
W
arar
arar
ar
ning! Do not connect the appliance to the mains until the installation is fullyning! Do not connect the appliance to the mains until the installation is fully
ning! Do not connect the appliance to the mains until the installation is fullyning! Do not connect the appliance to the mains until the installation is fully
ning! Do not connect the appliance to the mains until the installation is fully
complete.complete.
complete.complete.
complete.
Remove the grease filter and the
charcoal filter.
Drawing a line on the wall with a
pencil up to the ceiling, correspond-
ing to the centre line, will make the
installation operations easier.
Apply the perforation diagram to the
wall: the vertical centre line printed on
the perforation diagram should
correspond to the centre line drawn
on the wall. In addition, the lower
edge of the perforation diagram
corresponds to the lower edge of the
hood.
Make holes as indicated on the
template, insert the wall dowels and
screw 2 screws into the upper holes,
leaving a space of about 1 cm
between the head of the screw and
the wall.
Note:Note:
Note:Note:
Note: Always make the holes indi-
cated on the template. The upper 2
are for hooking the hood up while the
lower holes are for the definitive and
safety fixing.
7070
7070
70
electr electr
electr electr
electr
oluxolux
oluxolux
olux installation
GB
G
Ø 8
Ø 5x45
Ø 8
Ø 5x45
Apply flues support bracket to the
wall touching the ceiling. Use the
flues support bracket as a perforation
diagram (the small slot in the support
must coincide with the line previously
drawn on the wall, if present), and
mark two holes with a pencil. Make
the holes and insert 2 dowels.
Fix the flues support bracket to the
wall with 2 screws.
Hang the hood to the two upper
screws.
Introduce and screw the screws (and
washers) up into the holes for the
definitive fixing (COMPULSORY!!).
Then, having checked the setting of
the hood, TIGHTEN ALL THE upper
and lower SCREWS.
electrolux electrolux
electrolux electrolux
electrolux installation
7171
7171
71
GB
Fix the coupling ring to the flue
opening with 2 screws.
Remove and keep the 2 screws
located in front of the flue opening.
Remove the adhesive tape that
temporarily fixes the electronic box to
the suction motor unit.
Turn the electronic box to face
upwards.
Fix the box to the motor unit using
the 2 screws that were previously
removed.
Insert the power supply cable into the
electronic box and carry out the
electrical connection.
7272
7272
72
electr electr
electr electr
electr
oluxolux
oluxolux
olux installation
GB
Connect a tube (tube and bands for
fixing not supplied, to be purchased)
for discharging the fumes to the
connection ring placed over the
aspiration motor unit.
The other end of the tube should be
connected to a device for expelling
fumes on the outside of the hood in
the aspiration version.
If you want to use the filtering version,
fix deflector to flues support bracket
and connect the other end of the
tube to the connection ring placed on
deflector.
Install the charcoal filter (the charcoal
filter can be ordered from your local
Service Force Centre).
Slide the lower section of the flue
down to cover the aspiration set until
inserting it completely into the
apposite housing over the hood.
Raise the upper flue and fix it above
with 2 screws to flues support
bracket
Refit the grease filter.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Electrolux EFC90500K User manual

Category
Cooker hoods
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI