Operating instructions
Microphone
Item no. 1007896 (PM58) / 1007897 (PM58B)
Intended use
The microphone is intended for converting acoustic signals (sound waves) into
electricsignals.Thelowlevelaudiooutputsignalmustonlybeconnectedtosuitable
microphoneinputsonaudiodevices.
Itisintendedforindooruseonly.Donotuseitoutdoors.Contactwithmoisture,e.g.in
bathrooms,mustbeavoidedunderallcircumstances.
Forsafetyandapprovalpurposes(CE),youmustnotrebuildand/ormodifythisproduct.
Ifyouusetheproductforpurposesotherthanthosedescribedabove,theproductmay
bedamaged.Inaddition,improperusecancausehazardssuchasshortcircuiting,
re, electric shock etc. Read the instructions carefully and keep them. Make this
productavailabletothirdpartiesonlytogetherwithitsoperatinginstructions.
This product complies with the statutory national and European requirements. All
companynamesandproductnamesaretrademarksoftheirrespectiveowners.All
rightsreserved.
Delivery content
• Microphone
• XLR/XLRcable(onlyitemno.1007896)
• Jack/XLRcable(onlyitemno.1007897)
• Clamp(onlyitemno.1007896)
• Operatinginstructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• Donotdirectthemicrophoneatthespeakers.Thiswillcauseacoustic
feedbackthatcoulddamageboththespeakersandthemicrophone.
• In order to avoid distortions or mismatching, which could damage the
microphone or any audio device connected, the product must only be
connected tosuitablemicrophone inputs. Also refertothe connection
valuesundertechnicaldatainregardtothismatter.
• Only use a suitable, shielded microphone cable for connecting the
microphone.Usingothercablescouldcauseinterferences.
• Thedeviceisnotatoy.Keepitoutofthereachofchildrenandpets.
• Do not leave packaging material lying around carelessly. These may
becomedangerousplayingmaterialforchildren.
• Protecttheproductfrom extreme temperatures,directsunlight, strong
jolts,highhumidity,moisture,ammablegases,vapoursandsolvents.
• Donotplacetheproductunderanymechanicalstress.
• If it is no longer possible to operate the product safely, take it out of
operationandprotectitfromanyaccidentaluse.Safeoperationcanno
longerbeguaranteediftheproduct:
- isvisiblydamaged,
- isnolongerworkingproperly,
- hasbeenstoredforextendedperiodsinpoorambientconditionsor
- hasbeensubjectedtoanyserioustransport-relatedstresses.
• Pleasehandletheproductcarefully.Jolts,impactsorafallevenfroma
lowheightcandamagetheproduct.
• Alsoobservethesafetyandoperatinginstructionsofanyotherdevices
whichareconnectedtotheproduct.
• Consultanexpertwhenindoubtaboutoperation,safetyorconnectionof
thedevice.
• Maintenance,modicationsandrepairsaretobeperformedexclusively
byanexpertorataqualiedshop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operation
• Turnotheaudiodevicetowhichtoconnectthemicrophone.
• Connectthemicrophonetotheaudiodeviceusingthecableincluded.
• Reducethevolumeontheaudiodevice.
• Turnontheaudiodevice.
• Adjustthevolumeand,ifnecessary,alsothesensitivityoftheaudiodevice.
• Turn o the audio device after use. Disconnect the microphone from the audio
device.
Onlyitemno.1007896:Ifneeded,connecttheclamptoasuitablemicrophone
standandslidethemicrophoneintotheclamp.
Maintenance and cleaning
• This product does not require maintenance. There are no components located
insidetheproductyouneedtomaintain.Neveropen/dismantletheproduct.Have
maintenanceandrepairsdonebyqualiedexpertsorrepairshopsonly.
• Disconnecttheproductfromtheaudiodevicebeforecleaning.
• Tocleantheproduct,adry,softandcleanclothissucient.Youcanusealong-
haired,softandcleanbrushandavacuumcleanertoremovedust.
• Neveruseanyaggressivecleaningagentsorchemicalsolutionsastheymaycause
damagetothehousingortheproducttomalfunction.
• Unscrewthemicrophoneheadandcarefullyremovethefoamwindshieldinorderto
cleanlatterone,ifneeded.Cleanthewindshieldwithlukewarmwaterandletitdry
completelybeforereinstallingitonthemicrophonehead.
Disposal
Electronicdevicesarerecyclablewasteandmustnotbedisposedofinthe
householdwaste.
At the end of its service life, dispose of the product according to the
relevantstatutoryregulations.
Youthusfullyourstatutoryobligationsandcontributetotheprotectionof
theenvironment.
Technical data
Connectorplug/socket.......................XLR/XLR(Itemno.1007896)
6.35mmjack/XLR(Itemno.1007897)
Directivity.............................................Cardioid
Frequencyresponse...........................100–10000Hz
Sensitivity.............................................-65dB±3dB
Impedance...........................................300Ω±30%(Itemno.1007896)
600Ω±30%(Itemno.1007897)
Operatingconditions..........................-10to+50°C,<93%RH
Storageconditions..............................-10to+50°C,<93%RH
Cablelength.........................................5m(Itemno.1007896)
4m(Itemno.1007897)
Dimensions(ØxL)..............................52x165mm(Itemno.1007896)
52x169mm(Itemno.1007897)
Weight...................................................210g
TheseoperatinginstructionsarepublishedbyConradElectronicSE,Klaus-Conrad-Str.1,D-92240Hirschau(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processingsystemsrequirethepriorwrittenapprovalbytheeditor.Reprinting,alsoinpart,isprohibited.
Theseoperatinginstructionsrepresentthetechnicalstatusatthetimeofprinting.Changesintechnologyandequipmentreserved.
©Copyright 2014 byConradElectronicSE.
V1_0314_02-ETS-Mkd