RocketFish RF-GSL010A User manual

RocketFish
Brand
RocketFish
Model
RF-GSL010A
Category
Game console accessories
Type
User manual

RocketFish RF-GSL010A is a sturdy and durable stand designed for use with DJ Hero™ turntables for PlayStation®2, PlayStation®3, Xbox 360®, and Wii™. It provides two height levels and easy assembly. The stand's adjustable height allows you to find the perfect position for your turntable, whether you're sitting or standing. And its sturdy construction ensures that your turntable will stay securely in place, even during the most intense gaming sessions.

RocketFish RF-GSL010A is a sturdy and durable stand designed for use with DJ Hero™ turntables for PlayStation®2, PlayStation®3, Xbox 360®, and Wii™. It provides two height levels and easy assembly. The stand's adjustable height allows you to find the perfect position for your turntable, whether you're sitting or standing. And its sturdy construction ensures that your turntable will stay securely in place, even during the most intense gaming sessions.

Package contents
Center crossbar Top supports (2) Top cradle bars (2)
Base bar Stand feet (2) Bolt clips (4) Quick Setup Guide
Product features
• Designed for use with DJ Hero™ turntables for PlayStation®2,
PlayStation®3, Xbox 360®, and Wii™
• Made of sturdy, durable material
• Adjustable stand provides two height levels
• Easy assembly
Setting up the stand
1 Hold the stand feet upright.
RF-GSL010A
2 Insert one stand foot into the longer arm on the center crossbar.
3 Locate the two holes on the center crossbar. These holes determine
the height of the stand.
4 Align the two holes in the crossbar with the holes in the feet to set
the height, then insert a bolt clip through each of the holes.
5 Repeat Steps 1 through 4 to attach the second stand foot.
QUICK SETUP GUIDE
DJ Hero™ Stand
Higher level Lower level
Higher Lower
6 Insert a top cradle bar into one of the shorter arms on the center crossbar.
7 Align the holes on the top cradle bar and crossbar, then insert a bolt
clip through the holes.
8 Repeat Steps 6 and 7 to attach the other top cradle bar.
9 Snap the top supports onto the cradle bars. Make sure that the
rounded clips on the supports are on top of the cradle bars.
10 Slide out the pole on the base bar until it locks into place.
11 Insert the base bar into the stand feet until it locks into place.
12 Place the turntable on the stand.
Speci cations
• Compatible with PlayStation®2, PlayStation®3, Xbox 360®, and Wii™
• Stand dimensions: 26.57 × 19.09 × 29.92 (low) / 35.83 (high) inches
(67.5 × 48.5 × 76 (low) / 91 (high) cm)
• Individual product weight: 7.34 lbs. (3.345 kg)
• Weight limit: approximately 15 lbs. (6.8 kg)
90-day limited warranty
Visit www.rocket shproducts.com for details.
© 2010 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of
BBY Solutions, Inc. All other products and brand names are trademarks of their
respective owners.
ENGLISH 10-0798
Locked
CAUTION: This stand is intended only
for use with a DJ Hero™ turntable
accessory. Using the stand for other products
or objects, particularly those weighing more
than 15 pounds, may result in instability, which
may cause injury. When the turntable is on the
stand, do not lift the stand by the posts.
  • Page 1 1
  • Page 2 2

RocketFish RF-GSL010A User manual

RocketFish
Brand
RocketFish
Model
RF-GSL010A
Category
Game console accessories
Type
User manual

RocketFish RF-GSL010A is a sturdy and durable stand designed for use with DJ Hero™ turntables for PlayStation®2, PlayStation®3, Xbox 360®, and Wii™. It provides two height levels and easy assembly. The stand's adjustable height allows you to find the perfect position for your turntable, whether you're sitting or standing. And its sturdy construction ensures that your turntable will stay securely in place, even during the most intense gaming sessions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents