Specifications
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
CRITICAL DIMENSIONS
(DO NOT SCALE)
®
DESCRIPTION
•Metal construction with a chrome plated,
decorative glacier or LifeShine
®
polished brass finish
•Pressure balancing valve design with integral
check stops, 1/2" CC connections
OPERATION
•Lever style handle with temperature indicator on the
escutcheon, pull-on/push-off operation
•Temperature operates through an 180°arc of handle
travel (full cold to full hot)
•Adjustable temperature limit stop to control
maximum hot water temperature
•Pressure balancing mechanism maintains selected
discharge temperature to ±2°
CARTRIDGE
•1225 cartridge design
•Nonmetallic/nonferrous and stainless steel materials
•Accommodates back to back installations
STANDARDS
•Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein and complies with the applicable
requirements of ANSI A117.1
WARRANTY
•Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
•5 year warranty if used in commercial installations
MONTICELLO
®
MOENTROL
®
Single-Handle Tub/Shower Trim Only
Models: T3133, T3133P, T3133W
(Bulk Packed 12 per carton)
T3132, T3132P, T3132W
(Packed 1 per carton)
NOTE: See reverse side for illustrated
parts and optional handle inserts
7" (178mm)
ESCUTCHEON
DIAMETER
HOT
INLET
COLD
INLET
FINISHED WALL LINE
LEVER HANDLE
(Handle inserts
not furnished)
5-1/2" (140mm)
WALL OPENING
ESCUTCHEON
FLOOR
1-15/16"(49mm) MIN.
2-9/16" (65mm) MAX.
1-1/4" (32mm)
1" (25mm)
L
C
45" (1143mm)/
48" (1219mm)- SHOWER
32" (813MM) - TUB OR
TUB SHOWER
6'-6"
(1981mm)
7-1/2"
(191mm)
MIN.
TUB RIM
ADAsymbol applies to shower
valve control only.
Rev. 1/00
ADA
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Moen T3127CP User manual
-
Moen 3270P User manual
-
-
Moen U140CIS Installation guide
-
Moen T2442W User manual
-
-
-
-
-