Earthquake Sound TREMORX10-4/10-8 User manual

Brand
Earthquake Sound
Model
TREMORX10-4/10-8
Category
Car speakers
Type
User manual

This manual is also suitable for

Earthquake Sound Corporation • 2727 McCone Avenue Hayward, CA 94545 • Ph: (510) 732-1000 Fax (510) 732-1095
www.earthquakesound.com
TremorX Installation
&
Reference Manual
TremorX
TremorX10-4/10-8
TremorX12-4/12-8
TremorX15-4/15-8
Earthquake, TremorX
EARTHQUAKE SOUND • SUBWOOFER SPECIFICATION CHARTS2
TREMORX 4 & 8 OHM SUBWOOFER SPECIFICATIONS
Electrical “Q” (Qes)
Mechanical “Q” (Qms)
Total Speaker “Q” (Qts)
One way linear excursion
Efficiency (1W/1M)
Effective Piston Area (Sd)
REVC
Free Air Resonance (Fo)
DRIVER: TREMORX10-4 TREMORX12-4 TREMORX15-4
BL
VAS
Power Handling
Nominal Impedance
CAUTION: Earthquake
Audio products are
capable of producing
over 140dB and are
commonly used for high
powered audio systems.
Prolonged exposure to
SPL levels of over
1 0 0 d B w i l l c a u s e
p e r m a n e n t h a r i n g
d a m a g e . W e a t
Earthquake ask you to
please exercise extreme
caution when using our
product for competition
or every day use.
Dear Valued Customer,
Earthquake Sound Corporation, located in Hayward California at the heart of the San Francisco Bay Area; specializes in manufacturing high end car audio products
ranging from the smallest titanium tweeter to the world’s largest amplifier. In its dedication to excellence, Earthquake has maintained extensive programs in research and
development to provide you with the highest quality mobile audio products.
This owners manual is designed to better acquaint you with Earthquake products and to guide you through all phases of system design and application. It is imperative
that you read this manual in its entirety. Earthquake technicians and staff are looking forward to answering any questions you might have.
TREMORX10-8 TREMORX12-8 TREMORX15-8
1.034
2.127
0.696
1.1 in. / 27.94 mm
84.8 dB SPL
51.225 Hz
3.800 Ohm
17.302TM
1250 Max
4-Ohm
81.392 sq. in.
0.0525 sq. m.
4.1 Ft3
0.890
2.657
0.667
1.2 in. / 30.48 mm
86.3 dB SPL
28.815Hz
3.700 Ohm
15.910TM
4.90 ft3
1500 Max
4-Ohm
105.774 sq. in.
0.0682 sq. m.
0.642
3.101
0.532
1in. / 25.4 mm
83.8 dB SPL
33.701 Hz
13.231TM
2.1 Ft3
1000 Max
4-Ohm
53.522 sq. in.
0.0345 sq. m.
4.000 Ohm
53.522 sq. in.
0.0345 sq. m.
4.000 Ohm
28 Hz
0.5582
4.6012
0.4978
1in. / 25.4 mm
84.67 dB SPL
8-Ohm
1000 Max
1.30 Ft3
16.23TM
3.539 cu. ft.
100.15 liters
81.392 sq. in.
0.0525 sq. m.
1250 Max
8-Ohm
27 Hz
0.493
5.3508
0.6359
1.1 in. / 27.94 mm
86.80 dB SPL
6.67 Ohm
17.01TM
1500 Max
8-Ohm
26 Hz
0.462
6.774
0.433
1.2 in. / 30.48 mm
105.774 sq. in.
0.0682 sq. m.
90 dB SPL
9.1 ft3
12.03TM
5.98 Ohm
If using SINGLE 2 OHM coils the total load would be 2.0 ohm
If using SINGLE 4 OHM coils the total load would be 4.0 ohm
If using SINGLE 6 OHM coils the total load would be 6.0 ohm
If using SINGLE 8 OHM coils the total load would be 8.0 ohm
If using SINGLE 2 OHM coils the total load would be 1.0 ohm
If using SINGLE 4 OHM coils the total load would be 2.0 ohm
If using SINGLE 6 OHM coils the total load would be 3.0 ohm
If using SINGLE 8 OHM coils the total load would be 4.0 ohm
If using SINGLE 2 OHM coils the total load would be .66 ohm
If using SINGLE 4 OHM coils the total load would be 1.3 ohm
If using SINGLE 6 OHM coils the total load would be 2 ohm
If using SINGLE 8 OHM coils the total load would be 2.7 ohm
If using SINGLE 2 OHM coils the total load would be 0.5 ohm
If using SINGLE 4 OHM coils the total load would be 1.0 ohm
If using SINGLE 6 OHM coils the total load would be 1.5 ohm
If using SINGLE 8 OHM coils the total load would be 2 ohm
OHMS-LAW
PARALLEL WIRING
Ohms 2, 4, 6, 8
Ohms 2, 4, 6, 8
Ohms 2, 4, 6, 8
Ohms 2, 4, 6, 8
How To Wire Your Earthquake Subwoofer In Parallel
EARTHQUAKE SOUND • PARALLEL WIRING CONFIGURATIONS 3
Where R= Total system impedance
Rt=
R1+R2+R3+....
Where Rt= Resistance seen by amplifier
Series formula:
Example for series connection
For this example for all other
series applications.
16 1/2"
14"
19"
16"
TremorX12
#1
Bass head design for competition
19"
14"
13 1/2"
9"
TremorX12
#2
Port tuned design for deep bass
14"
14"
10 3/4 "
TremorX12
#3
Sealed design for tight bass
Specifications are subject to change without notice.
TREMORX ENCLOSURE DESIGNS
EARTHQUAKE SOUND • TREMORX SUBWOOFER ENCLOSURE DESIGNS
Dimensions shown are external Dimensions using 3/4" MDF.
4
15"
12"
15 1/2"
11"
TremorX10
#1
Bass head design for competition
#2
Port tuned design for deep bass
12"
16"
11 "
#2
Port
4" diameter
8 1/2" long
TremorX10
#3
Sealed design for tight bass
12"
12"
11 1/4 "
TremorX-10
5 3/4”
10 3/8”
9”
5”
5 5/8”
TremorX10-4
TremorX10-8
6 3/8”
12 3/8”
11”
5 / ”1 2
6 1/8”
TremorX1 -4
TremorX12-8
2
PORT (2”x12.5”x9”)
Internal dimensions
PORT (3”x12.5”x16”)
Internal dimensions
PORT (2”x10.5”x11”)
Internal dimensions
VB = 2 1/2 ft3
FB = optimized with
SLAPS-15 passive
Drone Tuned Box
17"
17"
15 "
23"
18"
12 1/2"
9"
TremorX15-4/8
22"
23"
16 1/2"
18"
TremorX15-4/8
#4
Passive tuned design for deep bass small volume
Specifications are subject to change without notice.
TREMORX ENCLOSURE DESIGNS
EARTHQUAKE SOUND • TREMORX SUBWOOFER ENCLOSURE DESIGNS
Dimensions shown are external Dimensions using 3/4" MDF.
5
#1
Bass head design for competition
#2
Port tuned design for deep bass
#3
Sealed design for tight bass
TremorX15-4/8
6 1/2”
15”
13 3/4”
6 3 /8”
7”
TremorX1 -4
TremorX15-8
5
PORT (6”x16.5”x16.5”)
Internal dimensions
PORT (2”x16.5”x9”)
Internal dimensions
Specifications are subject to change without notice.
EARTHQUAKE SOUND 5-YEAR LIMITED WARRANTY
EARTHQUAKE SOUND • EARTHQUAKE SOUND 5-YEAR LIMITED WARRANTY6
Earthquake warrants the original purchaser that all Factory Sealed New Audio surround & dust cap, burnt speaker voice coil.
Products to be free from defects in material and workmanship under normal • Fading and or deterioration of speaker components & finish due to
and proper use for a period of five (5) years from the date of purchase (as shown improper exposure to elements.
on the original bill of sale with serial number affixed/written on it). The five (5) • Bent amplifier casing, damaged finish on the casing due to abuse, misuse
year warranty period is valid only if an authorized Earthquake dealer properly or improper use of cleaning material.
installs the product and the warranty registration card is properly filled out and • Burnt tracers on PCB.
sent to Earthquake Sound Corporation. If a non-authorized party installs the • Product/part damaged due to poor packaging or abusive shipping
product, a ninety (90) day warranty period will be applied. conditions.
• Subsequent damage to other products.
(A) Five (5) years limited warranty plan coverage guidelines:
warranty claim will not be valid if the warranty registration card is not
• First year: Earthquake pays for labor, parts, and ground freight (only in US properly filled & returned to Earthquake with a copy of the sales invoice.
mainland, not including Alaska and Hawaii) (shipping to us is not covered).
A
Warranty card is located on the last page of this manual.
• Second year: Earthquake pays for labor and parts only, customer must pay
freight both ways.
(E) Service Request:
• Third, fourth & fifth year: Earthquake pays labor only. Customer must pay
for parts and freight both ways.
To receive product service, contact Earthquake service department at (510)
732-1000 and request an RMA number (Return Material Authorization). Items
(B) Warning:
shipped without a valid RMA number will be refused. Make sure you provide us
with your complete/correct shipping address, a valid phone number, and a brief
Products (sent for repair) that are tested by Earthquake technicians and
description of the problem you are experiencing with the product. In most cases,
deemed to have no problem(s) will not be covered by the five (5) year limited
our technicians might be able to resolve the problem over the phone; thus,
warranty. Customer will be charged a minimum of one (1) hour of labor (at the
eliminating the need to ship the product.
ongoing rates) plus shipping charges back to customer.
(F) Shipping Instructions:
(C) Earthquake will repair or replace - at our option - all defective
products/parts subject to the following provisions:
Product(s) must be packaged in its original protective box(es) to minimize
transport damage. Shipper claims regarding items damaged in transit must
• Defective products/parts have not been altered or repaired by other than an
be presented to carrier. Earthquake Sound Corporation reserves the right to
Earthquake factory-approved technician.
refuse improperly packed product. Original bill of sale must accompany
• Products/parts are not subjected to negligence, misuse, improper use or
product returned for service. We encourage you to include with the package
accident, damaged by improper line voltage, used with incompatible products
a written description of the problem. Ship product to: Earthquake Sound
or have its serial number or any part of it altered, defaced or removed, or have
Corp. 2727 Mc Cone Avenue, Hayward, CA 94545. Ph (510) 732-1000. You
been used in any way that is contrary to Earthquake's written instructions.
are responsible for the cost of shipping the product to Earthquake Sound
Corporation.
(D) Warranty Limitations:
(G) Disputes Resolution:
Warranty does not cover products that have been modified or abused,
including but not limited to the following:
All disputes - between clients and Earthquake Sound Corporation - resulting
• Damages to speaker cabinet and cabinet finish due to misuse, abuse or
from the five (5) years limited warranty policy must be resolved according to
improper use of cleaning materials/methods.
the laws & regulations of the county of Alameda -California.
• Bent speaker frame, broken speaker connectors, holes in speaker cone,
Five (5) year limited warranty
PRODUCT REGISTRATION
Your subwoofer(s) be registered by returning the Product Registration card attached to this manual or by visiting
www.earthquakesound.com/product registration. Please also retain the bill of sale, which represents proof of
purchase and helps expedite warranty issues.
SERIAL NUMBER
We recommended that you place or write
your serial number here for future
reference, if necessary.
*FIRST NAME:______________________________________________
*LAST NAME:_______________________________________________
*STREET ADDRESS:_________________________________________
__________________________________________________________
*CITY: ____________________ *STATE: ____________ *ZIP: ________
*PHONE: (____) ____ - ______
*DATE OF PURCHASE: __________ *PURCHASE PRICE: __________
*MODEL NUMBER:__________________________________________
*SERIAL NUMBER:
Apply Serial Number Here
*AUTHORIZED / DEALER NAME:_______________________________
*DEALER ADDRESS:_________________________________________
__________________________________________________________
*CITY:_______________ *STATE:____________ *ZIP:_______
*PHONE: (____) ____ - ______ *FAX: (____) ____ - ______
*SIGNATURE:_____________________ *DATE:____________
YOUR COMMENTS:_________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
REQUIRED INFO = *
EARTHQUAKE SOUND PRODUCT WARRANTY CARD
HOW DID YOU LEARN ABOUT US?
MAGAZINE: _____________________
INTERNET: ______________________
WORD of MOUTH: ________________
OTHER: ________________________
Note: Please make a copy of your warranty guidelines and card.
Earthquake Sound reserves the right to amend details of the specifications without notice.
Copyright © Earthquake Sound Corporation
Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545 • Phone: 510-732-1000 Fax: 510-732-1095
Earthquake Sound Corporation.
2727 McCone Ave, Hayward, CA 94545.
www.earthquakesound.com
From:
Postage
Stamp
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Earthquake Sound TREMORX10-4/10-8 User manual

Brand
Earthquake Sound
Model
TREMORX10-4/10-8
Category
Car speakers
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents