Jabra BT2040 User manual

Brand: Jabra

Model: BT2040

Category: Mobile headsets

Type: User manual

Jabra BT2040 is a wireless Bluetooth headset designed for mobile phone conversations. With its user-friendly features, it offers a convenient and hands-free calling experience. You can easily pair it with your phone using the simple pairing process described in the manual. The headset's LED light indicator provides visual cues for power and pairing status. The Jabra BT2040 allows you to answer and end calls with a simple tap of the answer/end button. It also enables you to wear it comfortably with or without the optional earhook, ensuring a personalized fit.

QUICK START GUIDE

Light indicator (LED)

Answer/end button

Removable earhook

Battery lid (backside)

Battery

TURNING YOUR HEADSET ON AND OFF

3 Seconds

5 Seconds

WARNING!

Headsets are capable of delivering sounds at loud volumes

and high-pitched tones. Exposure to such sounds can result

in permanent hearing loss damage. The volume level may vary

based on conditions such as the phone you are using, its

reception and volume settings, and the environment. Please

read the safety guidelines below prior to using this headset.

SAFETY GUIDELINES

1. Prior to using this product:

Before putting on the headset, turn the volume control to its

lowest level, put the headset on, and then slowly adjust the

volume control to a comfortable level.

2. During the use of this product:

Keep the volume at the lowest level possible and avoid using

the headset in noisy environments where you may be inclined

to turn up the volume;

If increased volume is necessary, adjust the volume control

slowly; and

If you experience discomfort or ringing in your ears, immediately

discontinue using the headset and consult a physician.

With continued use at high volume, your ears may become

accustomed to the sound level, which may result in permanent

damage to your hearing without any noticeable discomfort.

Using the headset while operating a motor vehicle, motorcycle,

watercraft or bicycle may be dangerous, and is illegal in some

jurisdictions. Check your local laws. Use caution while using your

headset when you are engaging in any activity that requires your

full attention. While engaging in any such activity, removing the

headset from your ear area or turning off your headset will keep

you from being distracted, so as to avoid accident or injury.

1. PUTTING THE BATTERY

INTO

THE HEADSET

To put the battery into the headset,

slide the lid on the backside off,

place the battery in the headset, and

slide the lid back on.

is a registered trademark

of GN A/S. All other trademarks included herein are the property of their

respective owners. The Bluetooth

word mark and logos are o

wned by

the Bluetooth SIG, Inc. and any use of such marks by GN US Inc. is under

license. (Design and specifications subject to change without notice.)

www.jabra.com

MADE IN CHINA PARTNUMBER 81-01910 REVA

CAUTION:

Always place the battery in your BT2040

as illustrated in Step 1 at left. Placing

the battery in upside down can result

in the device overheating. If your device

becomes warm remove the battery and

check whether the battery was inserted

properly. If the battery is inserted upside

down, the headset will not work, but it

will still overheat the device and wear

out the battery quickly.

FCC

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1)

This device may not cause harmful interference, and

(2) This device must accept any interference received,

inc

luding interference tha

t may cause undesired opera

tion.

Users are not permitted to make changes or modify the

device in any way. Changes or modifications not expressly

pproved by Jabra (GN Netcom) will void the user’

authority to opera

te the equipment.

Opera

tion is subject to the follo

wing two conditions:

(1) This device may not cause interference and (2) This

device must accept any interference, including interference

that may cause undesired operation of the device. The

term “IC:” before the certification/registration number

only signifies that registration was performed based on a

Declaration of Conformity indicating that Industry Canada

technical specifications were met. It does not imply that

Industry Canada approved the equipment.

Type: BT2040

quick start 7-5 8/1/07 1:17 PM Page 1

2. PAIRING THE HEADSET WITH YOUR PHONE

3. USING YOUR HEADSET

1a. FIRST TIME PAIRING:

Turn headset on –

automatic

pairing mode

1b. LATER PAIRING:

Turn headset off –

press and hold until

solid light comes on

3 Seconds

5 Seconds

<0.5 Second

For optimal performance,

wear the Jabra BT2040

and your mobile phone

on the same side of

your body or within

line of sight.

2. Activate Bluetooth on phone.

3. Press “YES” on the phone and confirm with PIN code: 0000 (4 zeros).

END CALL:

Tap the answer/

end button.

ANSWER CALL:

Tap the answer/

end button.

Optional earhook

can turn 360˚

Without earhook

4. WEARING STYLE

360˚

for news, support and competitions.

CUSTOMER CONTACT DETAILS:

WEB: www.jabra.com (for the latest support

info and online User Manuals)

E-MAIL: Tech Support: [email protected]

Information: [email protected]

Connectivity

MobilSurf

Bluetooth

Infrared Port

WAP options

Synchronization

Networks

Select Info

Devices found

Jabra BT2040

Select

Jabra BT2040

Passkey:

****

Jabra BT2040

Added. The

handsfree is now

ready for use

quick start 7-5 8/1/07 1:17 PM Page 2

Jabra BT2040 User manual

Brand: Jabra

Model: BT2040

Category: Mobile headsets

Type: User manual

Download PDF

report

Jabra BT2040 User manual

Jabra BT2040 User manual

Related papers

Other documents