Planet Technology VIP-157S User manual

VoIP Analog Telephone Adapter

VIP-156/VIP156PE/VIP-157/VIP-157S

User’s manual

Version 3.1

1

Copyright

The products and programs described in this User’s Manual are licensed products of PLANET Technology, This

User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all

accompanying hardware, software, and documentation are copyrighted.

No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic

medium or machine-readable form by any means by electronic or mechanical. Including photocopying, recording,

or information storage and retrieval systems, for any purpose other than the purchaser's personal use, and without

the prior express written permission of PLANET Technology.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments and applications,

and makes no warranty and representation, either implied or expressed, with respect to the quality, performance,

merchantability, or fitness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any

inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does not represent a commitment on the

part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s

Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and

reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s

Manual, at any time without notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your

comments and suggestions.

CE mark Warning

The is a class B device, In a domestic environment, this product may cause radio interference, in which case the

user may be required to take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human health as a result of the presence of

hazardous substances in electrical and electronic equipment, end users of electrical and electronic

equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of

WEEE as unsorted municipal waste and have to collect such WEEE separately.

Trademarks

The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware

and software products by their trade names. In most, if not all cases, their respective companies claim these

designations as trademarks or registered trademarks.

2

3

Revision

User’s Manual for PLANET VoIP Analog Telephone Adapter:

Model: ATA

Rev: 3.1 (2008, February)

Part No. EM-VIP_ATAV3.1

4

TABLE OF CONTENTS

Chapter 1...................................................................................................................................6

Introduction ..............................................................................................................................6

Overview.......................................................................................................................................................6

Package Content ..........................................................................................................................................7

Physical Details ............................................................................................................................................7

LED Display & Button.......................................................................................................................10

Chapter 2 Preparations & Installation.................................................................................12

Physical Installation Requirement............................................................................................................12

LAN IP address configuration via web configuration interface .........................................................13

Chapter 3 Network Service Configurations.........................................................................17

Configuring and monitoring your ATA from web browser....................................................................17

Overview on the web interface of ATA ..............................................................................................17

Manipulation of ATA via web browser...............................................................................................17

Chapter 4 VoIP Telephone Adapter Configurations............................................................19

Phone Book........................................................................................................................................19

Call Forward.......................................................................................................................................20

SNTP settings.....................................................................................................................................22

Volume Setting...................................................................................................................................22

Block Setting......................................................................................................................................23

Auto Answer (For VIP-157)...............................................................................................................24

Caller ID settings................................................................................................................................24

Dial Plan Settings...............................................................................................................................25

Flash Time Setting..............................................................................................................................27

Call waiting Settings ..........................................................................................................................27

T.38 (FAX) Settings............................................................................................................................28

Hot line Settings.................................................................................................................................28

Alarm Settings....................................................................................................................................29

LAN Settings......................................................................................................................................29

PC Settings.........................................................................................................................................30

DDNS Settings...................................................................................................................................31

VLAN Settings...................................................................................................................................32

DMZ Settings.....................................................................................................................................33

Virtual Server .....................................................................................................................................33

PPTP Settings.....................................................................................................................................34

Service Domain Settings ....................................................................................................................35

Port Settings.......................................................................................................................................36

Codec Settings....................................................................................................................................36

5

Codec ID Setting................................................................................................................................37

DTMF Setting ....................................................................................................................................38

RPort Settings.....................................................................................................................................38

Other Settings.....................................................................................................................................39

STUN settings....................................................................................................................................39

Auto Configuration.............................................................................................................................40

PTT Settings.......................................................................................................................................40

Cancel without to tag..........................................................................................................................41

MAC CIone Setting............................................................................................................................41

Tone Settings......................................................................................................................................43

Advanced Settings..............................................................................................................................43

System Authority................................................................................................................................44

Save & Reboot ...................................................................................................................................45

Firmware Upgrade..............................................................................................................................45

Auto Upgrade.....................................................................................................................................46

Reset to Default..................................................................................................................................47

Reboot without saving........................................................................................................................47

Appendix A Voice Communication Samples.........................................................................................49

Case 1: ATA to ATA connection via IP address ..................................................................................49

Case 2: (Peer-to-Peer mode) VIP-157S Port 1 to Port 2 communications .........................................50

Case 3: Voice communication via SIP proxy server – SIP-50............................................................51

Case 4: Voice communication via IP PBX system – IPX-2000 (Auto-config)...................................53

Case 5: Call Forward Feature_Example 1..........................................................................................57

Case 6: Call Forward Feature_Example 2..........................................................................................59

Case 7: Call Forward Feature_Example 3..........................................................................................61

Case 8: Call Forward Feature_Example 4..........................................................................................63

Case 9: Auto Answer Feature_IP to PSTN.........................................................................................64

Case 10: Auto Answer Feature_PSTN to IP.......................................................................................66

Appendix B The method of operation guide............................................................................................68

Call Transfer.......................................................................................................................................68

3-Way Conference..............................................................................................................................68

Call Waiting........................................................................................................................................68

Switch the Realm (Registration Proxy Server)...................................................................................68

Auto Update firmware by manual (Keypad)......................................................................................69

Appendix C VIP-156/VIP-156PE/VIP-157/VIP-157S Specifications.....................................................70

6

Chapter 1

1

Introduction

Overview

Based on years of VoIP manufacturing experiences, PLANET Technology VoIP total solutions are

known for advanced implementation of standards based telephony with mass deployment capability.

Cost-effective, easy-to-install and simple-to-use, the PLANET VIP-156/VIP-157/VIP-157S VoIP Phone

Adapter (“ATA” in the following term) converts standard telephones to IP-based networks. The service

providers and enterprises offer users traditional and enhanced the telephony communication services

via the existing broadband connection to the Internet or corporation network.

With the ATA, home users and companies are able to save the installation cost and extend their past

investments in telephones, conference and speakerphones. The ATA can be the bridge between

traditional analog systems and IP network with an extremely affordable investment.

The ATA includes two alternatively Ethernet interface for Internet (PPPoE, DHCP or Fixed IP), or office

LAN connection. With adding the auto-provision feature of our IP PBX product - IPX-2000, the ATA can

be seamlessly integrated into the telephony network and be used in consumer and business IP

telephony service, no expertise required!

The ATA and our IP PBX system integration are the ideal combination for your office daily

communications.

Product Features

• Feature-rich telephone service over home or office Internet/Intranet connection

• Auto-config feature for flexible, ease-of-use IP PBX system integration

• Cost effective, field proven compatibility, and stability

• Web-based and telephone keypad machine configuration

• Remote machine administration authentication

• Voice prompt for machine configurations

VoIP Features

• SIP 2.0 (RFC3261) compliant

• Peer-to-Peer / SIP proxy calls

• Voice codec support: G.711, G.723.1, G.729A/G.729B

• T.38 FAX transmission over IP network

• Voice processing: Voice Active Detection, DTMF detection/ generation, G.168 echo cancellation

(16mSec.), Comfort noise generation (CNG)

• In band, out-of-band, and SIP-info DTMF support

Package Content

The contents of your product should contain the following items:

VoIP Telephone Adapter

Power adapter

Quick Installation Guide

User’s Manual CD

RJ-11 cable x 1

Physical Details

The following figure illustrates the front/rear panel of ATA.

Respective model/descriptions are shown below:

VIP-156: SIP Analog Telephone Adapter

VIP-156PE: 802.3af PoE SIP Analog Telephone Adapter

VIP-157: 1 FXS/ 1 FXO SIP Analog Telephone Adapter

VIP-157S: 2-port FXS SIP Analog Telephone Adapter

Front Panel of VIP-156

7

Left / Right Panel of VIP-156

Front Panel of VIP-156PE

Left / Right Panel of VIP-156PE

8

Front Panel of VIP-157

Left / Right Panel of VIP-157

Front Panel of VIP-157S

9

Left / Right Panel of VIP-157S

LED Display & Button

1 PC

RJ-45 connector, to maintain the existing network structure,

connected directly to the PC through straight CAT-5 cable

2 LAN

RJ-45 connector, for Internet access, connected directly to

Switch/Hub through straight CAT-5 cable.

The LAN interface also can be connected with 802.3af PoE

switch or converter for power supply (VIP-156PE)

3 12V DC

12V DC Power input outlet

4 Reset

Reset to the factory default setting

ÍNote

Machine default IP is http://192.168.0.1. Press RESET

button on rear panel over 5 seconds will reset the VoIP Phone

Adapter to factory default value. (Except speed dial and

call forward settings)

10

LED display of VIP-156 / VIP-156PE

LED Indicators Descriptions

PWR

Power is supplied to the device.

STATUS

The Status LED will be flashing when the machine is operational

LNK/ACT

OFF: the device is connected to LAN at 10Mb/s.

ON: the device is connected to LAN at 100Mb/s.

RING

OFF: the phone is idle.

ON: the phone is in use (offhook).

Blinking: the phone is ringing.

LED display of VIP-157 / VIP-157S

LED Indicators Descriptions

STATUS

The Status LED will be flashing when the machine is operational

LNK/ACT

OFF: the device is connected to LAN at 10Mb/s.

ON: the device is connected to LAN at 100Mb/s.

RING 1

OFF: the phone is idle.

ON: the phone is in use (offhook).

Blinking: the phone is ringing.

RING 2

OFF: the phone is idle.

ON: the phone is in use (offhook).

Blinking: the phone is ringing.

11

2

Chapter 2

Preparations & Installation

Physical Installation Requirement

This chapter illustrates basic installation of ATA analog Phone Adapter ((“ATA” in the following term))

• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

• TCP/IP protocol must be installed on all PCs.

For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem

Administration Interface

PLANET ATA provides GUI (Web based, Graphical User Interface) for machine management and

administration.

Web configuration access

To start ATA web configuration, you must have one of these web browsers installed on computer for

management

• Microsoft Internet Explorer 6.0.0 or higher with Java support

Default LAN interface IP address of ATA is 192.168.0.1. You may now open your web browser, and

insert http://192.168.0.1

in the address bar of web browser to logon ATA web configuration page.

ATA will prompt for logon username/password, please enter: root / null (no password) to continue

machine administration.

12

LAN IP address configuration via web configuration interface

Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP in the adddress bar.

After logging on machine with username/password (default: root / no passwrd), browse to “Network”

--> “LAN Settings” configuration menu:

Parameter Description

ÍNote

Please locate your PC in the same network segment

(192.168.0.x) of ATA. If you’re not familiar with TCP/IP,

please refer to related chapter on user’s manual CD or

consult your network administrator for proper network

configurations.

IP address LAN IP address of ATA

Default: 192.168.0.1

Subnet Mask LAN mask of

ATA

Default: 255.255.255.0

Default Gateway Gateway of

ATA

Default: 192.168.0.254

Network settings via Keypad commands

The ATA series phone adapters support telephone keypad configurations, please connect analog

telephone set and refer to the following table for machine network configurations.

IVR Menu Choice Machine operation Parameter(s) Notes:

#111#

Set DHCP client None ATA will change to DHCP

13

14

Client

#112xxx*xxx*xxx*

xxx#

Setup Static IP Address

Use the * (star) key

when entering a decimal

point.

DHCP will be disabled and

system will change to the

Static IP type.

#113xxx*xxx*xxx*

xxx#

Set Network Mask

Use the * (star) key

when entering a decimal

point.

Must set Static IP first.

#114xxx*xxx*xxx*

xxx#

Set Gateway IP Address

Use the * (star) key

when entering a decimal

point.

Must set Static IP first.

#115xxx*xxx*xxx*

xxx#

Set Primary DNS Server

Use the * (star) key

when entering a decimal

point.

Must set Static IP first.

#190#

Unlock None

Must unlock the protect

function before set up

network settings and ATA

function via keypad.

#191#

Lock None

The system will be lock

and can’t set up network

settings via keypad.

#195#

Reboot None

The system will reboot

automatically.

#198#

Factory Reset None

The system will be reset to

factory default value and

reboot automatically.

0＊

To switch PSTN mode None VIP-157 only

Following keypad commands can be used to display the network settings enabled on ATA via voice

prompt.

IVR Menu Choice Machine operation Notes:

#120#

Check PC IP Address

IVR will announce the current PC-port IP

address of the ATA.

#121#

Check network connection Type

IVR will announce if DHCP in enabled or

disabled.

#122#

Check the Phone Number

IVR will announce current enabled VoIP

number.

#123#

Check Network Mask

IVR will announce the current network mask

of the ATA.

#124#

Check Gateway IP Address IVR will announce the current gateway IP

15

address of the ATA.

#125#

Check Primary DNS Server Setting

IVR will announce the current setting in the

Primary DNS field.

#126#

Check LAN IP Address

IVR will announce the current LAN port IP

address of the ATA.

#128#

Check Firmware Version

IVR will announce the version of the

firmware running on the ATA.

Following keypad commands can be used to set up the main function .

IVR Menu Choice Machine operation Parameter(s) Notes:

#138#

Enable call waiting None Enable Call waiting

#139#

Disable call waiting None Disable Call waiting

#160#

Update firmware None Update firmware

#510#

Blind Transfer ATA Bland Transfer

#511#

Attendant Transfer ATA Attendant Transfer

#512#

3-way calling ATA 3-way calling

#514#

IP transfer to PSTN

ATA transfer IP call to

PSTN side

#130+[1~8]#

Set Codec

1:G.711 u-Law, 2: G.711

a-Law, 3: G.723.1, 4:

G.729a, 5: G.726 16K, 6:

G.726 24K, 7: G.726

32K, 8: G.726 40K,

You can set the codec you

want to the first priority.

#131+[00~15]#

Set Handset Gain

Handset Gain from

0~15

You can set the Handset

gain to proper value,

default is 10

#132+[00~12]#

Set Handset Volume

Handset Volume from

0~12

You can set the Handset

volume to proper value,

default is 10

#135xxx*xxx*xxx*

xxx#

TFTP Server IP Address

Set Auto config TFTP

Server IP Address

You can set the TFTP

Server IP address

#136xxx*xxx*xxx*

xxx#

FTP Server IP Address

Set Auto config FTP

Server IP Address

You can set the FTP

Server IP address

#137+[0~2]#

Auto config mode

0: Disable, 1: TFTP

mode, 2: FTP mode

You can set the Auto

configuration mode, 0:

Disable, 1: use TFTP

Server, 2: user FTP Server

#145#

Forward function disable Disable forwrad funciton

#146+Number#

enable forward to FXS Eanble forward to FXS

Port Port

#147+Number#

enable forward to FXO

Port

Eanble forward to FXO

Port

#116#

Enable PPTP function None Enable PPTP function

#117#

Disable PPTP function None Disable PPTP function

#118#

Enable VLAN function None Enable VLAN function

#119#

Disable VLAN function None Disable VLAN function

fter confirming the modification you’ve done, Please click on the Submit button to apply settings and

rowse to “Save & Reboot” menu to reboot the machine to make the settings effective.

Please contact your Internet service provider to obtain the

L Hint

Internet access type, and select the proper network setti

in

ATA to establish the network connections.

ngs

A

b

Connection Type Data required.

Fixed IP

In most circumstances, it is no need to configure the DHCP settings.

DHCP clinet

The ISP will assign IP s, and related information. Addres

PPPoE

The ISP will assign PPPoE username / password for Internet access,

ave Modifica

ost of the VoIP router parameters will take effective after modifications, but it is just temporary stored

n RAM only, it will disappear after your reboot or power off the VoIP Phone Adapter, to save the

ffective forever, please remember to press the Save &

16

L Hint

Please consult your ISP personnel to obtain proper PPPoE/IP

address rel

If Internet connection cannot be established, please check

the physical connection or contact the ISP service staff

for support information.

ated information, and input carefully.

S tion to Flash Memory

M

o

parameters into Flash ROM and let it take e

Reboot button after you modify the parameters.

17

Chapter 3

Network Service Configurations

3

Configuring and monitoring your ATA from web browser

The ATA integrates a web-based graphical user interface that can cover most configurations and

machine status monitoring. Via standard web browser, you can configure and che

from anywhere around the world.

ck machine status

Overview on the web interface of ATA

With web graphical user interface, you may have:

 More comprehensive setting feels than traditional command line interface.

 Provides user input data fields, check boxes, and for changing machine configuration settings

 Displays machine running configuration

To tart ATA web configuration, you must have one of these web browsers installed on computer for

Java support

s

management

 Microsoft Internet Explorer 6.0.0 or higher with

Manipulation of ATA via web browser

Log on ATA via web browser

After TCP/IP configurations on your PC, you may now open your web browser, and input

http://192.168.0.1

to logon Phone Adapter web configuration page.

root null (no password) Phone Adapter will prompt for logon username/password: /

ATA log in page

When users login the web page, users can see the Phone Adapter system information like firmware

version, company…etc in this main page.

VoIP Phone Adatper main page

18

Chapter 4

VoIP Telephone Adapter Configurations

Phone Book

ATA can set up 140 records of Phone Book. User can dial the Name records to make calls via Phone

Book feature.

19

Field Description

Phone Book Page

The default is Page 1. It can select Page1 ~ Page 14

to look round Phone Book records.

Phone

The record number from 0 ~ 139, it can set up 140

records in total.

Name

The name of Phone Book records, it only can input

numerals.

URL

Fill in the outgoing number (Line Number) or IP

address.

Select

To select this record.

4

If you need to add a phone number into the Phone Book list, you need to input the position, the name,

and the phone number (by URL type). When you finished a new phone list, just click the “Add Phone”

button.

If you want to delete a phone number, you can select the phone number you want to delete then click

“Delete Selected” button.

If you want to delete all phone numbers, you can click “Delete All” button.

For Example:

Ex_1:

ATA had added the above phone numbers. User pick up the handset and dial the “301” to make

the P2P call ([email protected]

).

Ex_2:

Users pick up the handset and dial the “206” to make the Proxy call (17476433364).

Ex_3:

Users pick up the handset and dial the “202” to make the P2P call (192.168.1.2:5062).

Call Forward

This page defines Call Forward function. You can setup the phone number you want to forward in this

page. There are three type of Forward mode. You can choose All Forward, Busy Forward, and No

Answer Forward by click the icon.

All Forward: All incoming call will forward to the number you chosen. You can input the name and the

phone number in URL field. If you select this function, then all the incoming call will direct forward to the

20

Page is loading ...

Planet Technology VIP-157S User manual

This manual is also suitable for

Planet Technology VIP-157S User manual

Related papers

Other documents