Skmei 1055, 0981, 1046 Watch Owner's manual

Hello! I am an AI chatbot trained to assist you with the Skmei 1055, 0981, 1046 Watch Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
How do I turn on the backlight?

How do I switch between modes?

How do I start, suspend, and continue the chronograph?

How do I record split times?

How do I turn on and off the alarm and hourly chime?

How do I set the alarm time?

How do I set the time and date?

Operation instruction

A. Features

 12 Digits, Hour ,Minutes ,Seconds ,Month,Day and Week

 Daily Alarm and Chime hourly

 12 / 24H,Auto Calendar

 1/100 second Chronograph with split count

 EL backlight

B. Operational Manual

 At any station , press A key , the EL back light on for 3 seconds.

 Press B key to convert MODE:

Chronograph functions

In normal display mode: press B key once, enter Chronograph mode

 Press D to start, press D again to suspend, press D again to continue,press D to suspend again,......when

suspend,press C key back to 0:00:00.

 In Chronograph mode, press D key to start, press C key enter into split function,and the “SPL” symbol appear,press C

key again to get the first group record ,but the second group still processing in the back ground,press C key again to

continue the second group,press C key again to read the second group record......when the final group finished, Press

D key to stop the SPL function,press C key read the final group(SUM) record, press C key again to clear the record to

zero.

In n o rm a l mode p r e ss B c hron o g ra p h p ress D t o sta r t p re s s D to s u s p e nd

Press B e x i t p res s D t o s top p ress C t o continue press C f o r S P L p r e s s C to z e r o

Alarm & Chime ON/OFF

 In normal mode press B key twice to enter to Alarm Mode, Then press D to ON/OFF “ALM” /“SIG” function.

 If “ALM/SIG” symbol appears , means ALM/SIG function ON,otherwise means OFF

 “ALM/ ” appear means ALARM Function ON.”SIG/CHI/ ” appear means HOURLY CHIME function ON

Alarm setting

 in normal Mode, press B twice to enter Alarm mode and press C then “Hours”flashing

 Press D to adjust “Hour” for your Alarm. Pay attention to AM/PM

 Press C then “Minutes” flashing, Press D to adjust “Minutes” for your alarm . Press B key to exit.

Time & date setting

In Normal Mode, press B three times enter into setting mode and the “Seconds” flashing,Press D to zero.

 Press C the “Hours” will flash. Press D to adjust “Hours”

 Press C the “Minutes” will flash. Press D to adjust “Minutes”.

 Press C the “Month” will flash. Press D t o adjust “Month”

 Press C the “Date”will flash. Press D to adjust “date”

 Press C the “Week” will flash. Press D to adjust “Day”

 Press B key to exit.

Skmei watch direct sales