StarTech.com ET91000LC2, ET91000SC2 User manual

  • Hello! I am an AI chatbot trained to assist you with the StarTech.com ET91000LC2 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 01/20/2012
For the most up-to-date information, please visit: www.startech.com
Rear View (ET91000LC2 / ET91000SC2)
ET91000LC2 / ET91000SC2
Gigabit Ethernet to Multi Mode LC/SC Fiber Media Converter - 550m
Packaging Contents
• 1xFiberMediaConverter
• 1xUniversalPowerAdapter
• 3xPowerAdapterPlug(NA/UK/EU)
• 1xInstructionManual
System Requirements
• 1000BASE-TcompatibleEthernetnetworkequipment
• RJ45terminatedUTPCat5eorbetterEthernetcable
• 1000BASE-LX/SXcompatibleberopticnetworkequipment
• LCorSCterminatedmultimodeberopticcable
• AvailableACelectricaloutlet
Installation
1. MakesuretheDIPswitchesaresetappropriatelyforyournetwork
conguration(see“DIPSwitchSettings“sectionfordetails).
2. Connecttheberopticnetworkcablefromacomputer/switch/
mediaconvertertotheLC/SCconnectoronthemediaconverter.
NOTE: Whenconnectingthebercable,makesuretoconnecttheTx
(transmit)terminalononeend,withtheRx(receive)terminalonthe
otherend.
3. ConnectaUTPEthernetcable,fromacomputer/switchtothe
RJ45jackonthemediaconverter.
4. Connectthepoweradaptertothemediaconverter.
5. Thefollowingexampleillustratestheconnectionschemewhen
connectingfroma1000BASE-TEthernetportofahub/switchto
a1000BASE-SX/LXportofanotherhub/switch,throughtheber
mediaconverter:
6. Thefollowingexampleillustratestheconnectionschemewhen
connectingfroma1000BASE-TEthernetportonahub/switchtoa
1000BASE-TEthernetNetworkInterfaceCard(NIC)inacomputer
throughthebermediaconverter:
Dip Switch LED Indicators
Card Release
Thumbscrew
RJ45 Ethernet
connector
LC Duplex Fiber
connector
DC Power connector
Ground point (optional)
*actual product may vary from photos
ET91000LC2
Dip Switch
LED Indicators
Card Release
Thumbscrew
RJ45 Ethernet connector
SC Duplex Fiber
connector
ET91000SC2
FCC Compliance Statement
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst
harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycause
harmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor
televisionreception,whichcanbedeterminedbyturningtheequipmentoandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com.WheretheyoccurthesereferencesareforillustrativepurposesonlyanddonotrepresentanendorsementofaproductorservicebyStarTech.com,oranendorsementoftheproduct(s)
towhichthismanualappliesbythethird-partycompanyinquestion.Regardlessofanydirectacknowledgementelsewhereinthebodyofthisdocument,StarTech.comherebyacknowledgesthatall
trademarks,registeredtrademarks,servicemarks,andotherprotectednamesand/orsymbolscontainedinthismanualandrelateddocumentsarethepropertyoftheirrespectiveholders.
Technical Support
StarTech.comslifetimetechnicalsupportisanintegralpartofourcommitmenttoprovideindustry-leadingsolutions.Ifyoueverneedhelpwithyourproduct,visitwww.startech.com/supportandaccess
ourcomprehensiveselectionofonlinetools,documentation,anddownloads.
Forthelatestdrivers/software,pleasevisitwww.startech.com/downloads
Warranty Information
Thisproductisbackedbyatwoyearwarranty.
Inaddition,StarTech.comwarrantsitsproductsagainstdefectsinmaterialsandworkmanshipfortheperiodsnoted,followingtheinitialdateofpurchase.Duringthisperiod,theproductsmaybereturned
forrepair,orreplacementwithequivalentproductsatourdiscretion.Thewarrantycoverspartsandlaborcostsonly.StarTech.comdoesnotwarrantitsproductsfromdefectsordamagesarisingfrom
misuse,abuse,alteration,ornormalwearandtear.
Limitation of Liability
InnoeventshalltheliabilityofStarTech.comLtd.andStarTech.comUSALLP(ortheirocers,directors,employeesoragents)foranydamages(whetherdirectorindirect,special,punitive,incidental,
consequential,orotherwise),lossofprots,lossofbusiness,oranypecuniaryloss,arisingoutoforrelatedtotheuseoftheproductexceedtheactualpricepaidfortheproduct.Somestatesdonotallow
theexclusionorlimitationofincidentalorconsequentialdamages.Ifsuchlawsapply,thelimitationsorexclusionscontainedinthisstatementmaynotapplytoyou.
Specications
ET91000LC2 ET91000SC2
Supported
Standards
IEEE802.3ab,IEEE802.3z
Connectors
1xRJ45Ethernet
female
2xLCFiberfemale
1xDCPower
1xRJ45Ethernet
female
2xSCFiberfemale
1xDCPower
Compatible Fiber
Type
MultiMode
Optical Wavelength 850nm
Maximum Distance 550m(1804ft)
Duplex Modes Full/Half
Auto MDIX Yes(Ethernet)
Power Adapter
12VDC,1000mA,centerpositive,
typeMplug
Power Consumption <4W
Enclosure Material Metal
Operating
Temperature
0°C~60°C(32°F~140°F)
Storage
Temperature
-10°C~70°C(14°F~158°F)
Humidity 10%~90%RH
Dimensions (LxWxH) 160.0mmx95.0mmx20.0mm
Weight 600g
LED Status
LED Name Status Description
PWR Power
ON Unitispowered
OFF Unitisnotpowered
RPF
Remote
PowerFailure
ON RemotePowerFail
OFF RemotePowerNormal
LNK FiberLink
ON Fiberlinkisdetected
OFF Fiberlinkisnotdetected
Blink Fiberactivity
LFP
LinkFault
Pass-through
ON LFPModeenabled
OFF LFPModedisabled
DIP Switch Settings
Full/ Half:
EthernetDuplexmodewillbeconguredforFullorHalf.
LFP:
LinkFaultPass-throughwillpassalinkfailuretotheEthernet
side,ifalinkfailureisencounteredonthebersideandvice
versa.Otherwise,theEthernetsidewillcontinuetoshowno
linkfailures,evenifthebersidehasnolink.
(OFF=Notactive,On=Active)
Auto/Force:
Autonegotiateduplexmode,orforceFull/HalfviaDIP
switches.
/