AmerTac VN1ANTP1 User manual

Category
Television antennas
Type
User manual

This manual is also suitable for

AmerTac VN1ANTP1 is an indoor HDTV antenna designed to receive free local HD and digital TV broadcast signals. It features adjustable VHF dipoles for improved reception of channels 2-13 and a UHF loop for channels 14-69. The non-scuff base protects cabinets and TVs, and it includes a 58" coax cable for easy installation.

AmerTac VN1ANTP1 is an indoor HDTV antenna designed to receive free local HD and digital TV broadcast signals. It features adjustable VHF dipoles for improved reception of channels 2-13 and a UHF loop for channels 14-69. The non-scuff base protects cabinets and TVs, and it includes a 58" coax cable for easy installation.

HDTV
Designed For
Questions?, ¿Preguntas? 201.661.9944
©2010 AmerTac™
Saddle River Executive Centre
One Route 17 South
Saddle River, NJ 07458
www.amertac.com
Made in China/Fabriqué en Chine/Hecho en China
I10-0000-A
VHF/UHF
TV Antenna
Digital and HDTV Compatible
Improved Reception for Channels 2 to 69
Receives local HD and Digital TV broadcast signals for free
Adjustable VHF dipoles extend up to 39" to improve reception for channels 2-13
UHF loop for improved reception of channels 14-69
Non-scuff base protects cabinets and TVs
Includes 58" coax cable
VN1ANTP1
Reception Frequency
VHF (47
~
230MHz) / UHF (470
~860MHz)
Impedance
75 Ohms
Zenith is a registered trademark of Zenith Electronics LLC and used under license.
Zenith est une marque de commerce déposée de Zenith Electronics LLC et utilisée sous licence.
Zenith es una marca registrada de Zenith Electronics LLC y se utiliza bajo licencia.
Connect to TV
-Connect coaxial cable connector to TV's RF input
Adjust Antenna
-Rotate antenna base to improve UHF signal
-Extend and move dipoles to improve VHF reception
Note: If antenna is not receiving correctly, try placing in different position.
Installation
1
2
Note: If antenna is not receiving correctly, try placing in different position.
Note: If antenna is not receiving correctly, try placing in different position.
VHF/UHF
Antenne TV
Compatibilité TV numérique et HD
Réception améliorée des chaînes 2 à 69
Réception gratuite de signaux de diffusion TV numérique et HD locaux
Doublets VHF réglables et extensibles jusqu’à 1 m (39 po) pour améliorer la réception des chaînes 2 à 13
Boucle UHF pour améliorer la réception des chaînes 14 à 69
La base anti-rayure protège les placards et les téléviseurs
Inclut un câble coaxial de 1,4 m (58 po)
VHF/UHF
Antenna de TV
Compatible con señales digitales y HDTV
Recepción mejorada de los canales 2 a 69
Recibe señales de transmisión de TV digital y de alta definición locales gratis
Los dipolos VHF ajustables se extienden hasta 39 pulg. para mejorar la recepción de los canales 2 a 13
Bucle UHF para mejorar la recepción de los canales 14 a 69
La base antirrayaduras protege los gabinetes y los televisores
Incluye cable coaxial de 58 pulg.
VN1ANTP1
Installation/Installation
1
2
Connect to TV
-Connect coaxial cable connector to TV's RF input
Adjust Antenna
-Rotate antenna base to improve UHF signal
-Extend and move dipoles to improve VHF reception
Connect to TV
-Connect coaxial cable connector to TV's RF input
Adjust Antenna
-Rotate antenna base to improve UHF signal
-Extend and move dipoles to improve VHF reception
Reception Frequency/Reception Frequency
VHF (47
~
230MHz) / UHF (470
~860MHz0
Impedance/Impedance
75 Ohms
HDTV
Diseñada para
TVHD
Conçue pour
  • Page 1 1
  • Page 2 2

AmerTac VN1ANTP1 User manual

Category
Television antennas
Type
User manual
This manual is also suitable for

AmerTac VN1ANTP1 is an indoor HDTV antenna designed to receive free local HD and digital TV broadcast signals. It features adjustable VHF dipoles for improved reception of channels 2-13 and a UHF loop for channels 14-69. The non-scuff base protects cabinets and TVs, and it includes a 58" coax cable for easy installation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI