HOME
DECORATORS
C O L L E C T I O N
Exterior Post Lantern
SKU 272-775 (UPC 046335974500)
(Aged Iron Finish)
INSTRUCTION MANUAL
Page 1
Y37031A-151 E/S
Thank you for purchasing this Home Decorators Collection exterior
light fixture. This product has been manufactured with the highest
standards of safety and quality.
FEATURES:
1. Exterior Post Lantern in Aged Iron Finish.
2. Timeless elegant design.
3. Easy to assemble and install.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer
Service Team at 1-800-986-3460 or visit www.homedepot.com. Please
reference your SKU (272-775 Aged Iron Finish fixture) or UPC
(046335974500).
Page 2
CAUTION:
1. Before starting installation of this fixture or removal of a previous
fixture, disconnect the power by turning off the circuit breaker or
by removing the fuse at the fuse box.
2. CONSTULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. If you have any non-electrical questions about this fixture, please
contact our Customer Service Team at 1-800-986-3460 or visit
www.homedepot.com. Please reference your SKU (272-775 Aged
Iron Finish fixture) or UPC (046335974500).
4. Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):
Page 3
Wire Cutters
Wire Strippers Safety Glasses Electrical Tape
Phillips Screwdriver Flathead Screwdriver
3 Candelabra
Light Bulbs (60
watt maximum)
PARTS INCLUDED (parts are not to scale):
Page 4
(3) Wire Nuts
(3) Fixture
Mounting Screws
(2) Hood Screws
(1) Cage
(1) Hood
INSTALATION & ASSEMBLY:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Pull the power supply wires out from the Post(Fig. 1).
3. Attach the Black Supply Wire to the Black Fixture Wire and the White Supply
Wire to the White Fixture Wire using Wire Nuts. Connect the Fixture Ground
Wire and the Supply Ground Wire together using a Wire Nut. Wrap all wire
connections with electrical tape for a more secure connection (Fig. 1). Note:
If you have electrical quest ions, consu lt your local elec trical cod e for
approved grounding methods .
4. Carefully tuck all the wires and wire connectors into the Post. Slide the Post
Cap of the fixture onto the Post. Secure the Post Cap to the Post using the
provided Fixture Mounting Screws (Fig. 1).
Page 5
Fixture
Mounting Screw
Post Cap
Black Fixture Wire
Black Supply Wire
Post
Supply Ground Wire
White Fixture Wire
White Supply Wire
Fixture Ground Wire
Wire Nut
Cage
Fig. 1
Page 6
INSTALLATION & ASSEMBLY (cont.):
5. Install three (3) incandescent candelabra Light Bulbs in the socket of the
Main Fixture Body. Do not exceed a 60 watt incandescent light bulb (Fig.
2).
6. Attach the Hood to the Cage using the provided Hood Screws (Fig. 2).
7. Installation is complete. Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
.
Hood
Light Bulb
Cage
Hood Screw
Fig. 2
Page 7
TROUBLESHOOTING:
PRODUCT MAINTENANCE:
1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use
clean water, never a solvent) to wipe the glass and surface of the fixture.
2. To clean the inside of the fixture, first disconnect power to the fixture by turning off
the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly
dampened clean cloth (use clean water, never a solvent) to wipe the inside glass and
interior surface of the fixture.
3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully.
LIMITED WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a
period of three (3) years from date of purchase. This warranty applies only to the original consumer
purchaser and only to products used in normal use and service. If this product is found to be defective, the
manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement for the product at
the manufacturer’s discretion, provided that the product ahs not been damaged through misuse, abuse,
accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product
that is found to have been improperly installed, set-up, or used in any way not in accordance with the
instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of
an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to
faculty material or workmanship. This warranty shall not apply to the finish on any portion of the product,
such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specially disclaims any warranty, whether express or implied
of fitness for a particular purpose, other than the warranty contained herein. The manufacture
specifically disclaims any liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor/expense cost involved in the replacement or repair of
said product.
Symptom Possible Cause Corrective Action
1. Power is off. 1. Make sure power supply is on.
2. Faulty switch. 2. Test or replace switch.
3. Faulty wire connection. 3. Check wiring.
Fuse blows or circuit breaker
trips when light is turned on.
1. Crossed wires or power wire is grounding
out.
1. Check wire connections.
Light will not turn on.
Farol de Poste para Exterior
SKU 272-775 (UPC 046335974500)
(Acabado de Hierro Envejecido)
HOME
DECORATORS
C O L L E C T I O N
MANUAL DE INSTRUCCIONES
Page 8
Y37031A-151 E/S
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
