Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
06/25/2007 4:34:57 PM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADH050473
DESCRIPTION
LumaWatt motion detector works in conjunction with fixture dimmers to
provide bi-level control based on an area's occupancy. Motion detector is
passive infrared type and reacts to changes in infrared energy (heat) within
the coverage area.
LumaWatt individual fixture controls are the perfect solution for warehouse
and storage area retrofit opportunities. Wiring is integrated directly to the
housing without the need to run additional control wires throughout the
facility.
A ... Power
Sensor is wired directly to the
luminaire and operates on 120V
with Magnetic CWA HID ballast
systems. The detector is pre-wired
and mounted to junction box.
Ballast assembly shipped with
wiring compartment for
connection to ballast. Specify
"HSW" options for Magnetic H.I.D.
luminaires and "LSW" option for
ECON(TM) Electronic H.I.D. open
and enclosed Steeler and
Benchmark luminaires.
B ... Reflector Bracket
Unit comes with all necessary
hardware to mount to a wide
variety of open or enclosed optical
assemblies. Consult individual
specification sheets for
compatibility and ordering logic.
C ... Motion Sensor
360° viewing allows coverage
between luminaires. Ideal for
mounting heights from 15-45 feet.
D ... LED Motion Indicator
Green LED provides visual
indication of when the sensor is
detecting motion.
E ... Time Delay Setting
Luminaire ships with 15 minute
start up timer. Sensors can be
adjusted from 30 seconds to 20
minutes.
F ... Ambient Environments
Standard sensor operates from
-10°C to 55°C.
IRMS
INDIVIDUAL
FIXTURE
CONTROL
OPTION
Infarered Intergral
Motion Sensor
MOTION SENSOR
45
40
35
30
25
20
15
10
5
0
30 20 10 0 10 20 30
| | | | | | |
NOTES: 1 Consult individual luminaire specification sheets for compatibility and ordering information.
O R D E R I N G I N F O R M AT I O N
1
S A M P L E N U M B E R : M H S S - S A 1 8 - M - 4 0 0 - M T- H S W
OPTIONS (add as suffix)
HSW
=Integral LumaWatt Sensor and with Wide Distribution Control for CWA Magnetic Ballast
LSW=Integral 0-10V Sensor and with Wide Distribution Control for ECON
TM
Electronic Ballast
S
Y
S
T
E
M
S
C
E
R
T
I
F
I
E
D
COOPER LIGHTING - LUMARK
®
/
