2. Intermec
  3. 318-033-001
318-033-001

Intermec 318-033-001, 318-034-001, 825-199-001, 850-815-001, 851-064-006, 851-065-105, 871-229-001, 871-229-002, 871-230-101, 871-231-001, 871-236-001 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Intermec 318-033-001 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Accessories Guide
CK
3
RFID-Ready Snap-On Adapter
Accessory Name Part Number Description
IP30 Part Number
available in August
Snaps onto the bottom of CK3 Series
devices as a passive UHF RFID handle.
Docks and Modules
Accessory Name Part Number Description
Single Dock 871-228-001 USB Host and Client Support with bay
for charging an auxiliary battery pack.
Requires Power Supply 851-061-207 and
country specific AC power cord. Optional:
Single Dock Ethernet Modules.
Multi-Dock, Ethernet
(Photo Pending)
871-229-002 4-slot Ethernet dock provides extra
port allowing for ability to link up
to three (3) multi-docks. Requires
Power Supply 851-064-006 and
country-specific AC power cord.
Multi-Dock, Charge Only
(Photo Pending)
871-229-001 Allows for charging up to 4 devices.
Requires power supply 851-064-006 and
country specific power cord.
Vehicle Dock 871-231-001 Securely holds CK3 and provides
power. Cabled RS232 (5V pwr on
pin 9) or USB Host support is also
available. Requires use of Intermec
RS232 Serial cable (p/n 225-737-001) or
Intermec USB cable (VE011-2016).
The CK3 Series vehicle dock uses the same
mounting system (p/n 805-611-001) and
vehicle power kits (p/n 851-065-105) as
the CN3 & 700 Series vehicle dock.
Non-Powered Vehicle Holder 871-236-001 Securely holds CK3.
IP30 Vehicle Holder
(Photo Pending)
871-237-001 Non-Powered vehicle holder to
hold CK3 with IP30 attached.
Single Dock Ethernet Module
(Photo Pending)
871-025-101 CK3 Series Ethernet Module interfaces with
USB Host connector on Single Dock.
Accessories Guide
CK
3
Holsters & Handles
Accessory Name Part Number Description
Standard Belt Holster –
no handle
825-198-001 Rugged lightweight holster with belt
designed for use with handheld applications
where scan handle is not required.
Standard Belt Holster –
with handle
825-199-001 Rugged lightweight holster with
belt designed for use with handheld
applications requiring a scan handle.
Scan Handle
203-879-001 Customer installable scan handle
(replaces the hand strap).
Snap-On Adapters
Accessory Name Part Number Description
Snap-On RS-232 Adapter
(Photo Pending)
850-815-001 Enables RS232 support from bottom
of CK3. Must order cables separately.
Adapter provides DB9M connector and 5V
power on pin-9 for tethered scanners.
Snap-On Audio Adapter
(Photo Pending)
850-816-001 Provides 3.5mm standard audio
jack for use of wired headset.
Snap-On Power Adapter
(Photo Pending)
850-817-001
Recommended for in-field charging solutions
not requiring vehicle dock. Supports
use of auto power charger 852-043-003
or AC power supply 851-065-105.
2
Accessories Guide
CK
3
Batteries & Chargers
Accessory Name Part Number Description
Standard Capacity
Battery Pack
318-033-001
One (1) rechargeable 7.4 watt hours (2000
mAh) standard battery pack for the CK3.
Extended Capacity
Battery Pack
318-034-001 One (1) rechargeable 18.5 watt hours (5100
mAh) extended battery pack for the CK3.
Quad Battery Charger 871-230-001
Charges four CK3 Series battery packs.
Requires Power Supply 851-061-207 and
country-specific AC power cord. Charges
both standard and extended batteries.
Cables
Accessory Name Part Number Description
USB-A to USB-microB, 1M 236-209-001 Use with CK3 Series Single Dock
(871-228-001) or Vehicle Dock USB
Adapter Cable for ActiveSync (VE011-2016)
connection to PC USB port.
Power Supplies & Adapters
Accessory Name Part Number Description
Universal Power Supply,
12VDC, Output
851-064-006 Use with CK3 Series Multi-docks
(871-228-001 & 871-028-002). Order
country-specific AC power cord separately.
Universal Power Supply,
12VDC/30W, Output
851-061-207 Use with CK3 Series Single Dock
(871-228-001) or CK3 Series Quad Battery
Charger (871-230-001). Order country-
specific AC power cord separately.
3
Accessories Guide
CK
3
4
Power Supplies & Adapters (continued)
Accessory Name Part Number Description
Universal Power Supply, 5V 851-065-105 AC power supply with barrel jack. Allows
charging of CK3 Series devices without a
dock. Requires use of CK3 Series Snap-
on Power Adapter (850-557-001). Order
country-specific AC power cord separately.
Auto Power Adapter
(Photo Pending)
852-043-003 For use with Cigarette Lighters. Barrel jack
that allows charging of CK3 handheld.
Requires use of CK3 Series Snap-on
Power Adapter (850-557-001).
Replacement Parts
Accessory Name Part Number Description
Cable Retainer
Replacement Kit
203-810-001 Contains five (5) sets of Cable Retainers
used to secure USB connections.
Screen Cleaner Kit,
Pre-Moistened Wipes
346-065-101 Includes 24 pre-moistened, non-
abrasive, non-streaking 4”x7” wipes.
Screen Protector,
10 Each
346-069-107 Contains ten (10) self-adhesive
screen protectors.
Copyright © 2008 Intermec
Technologies Corporation. All
rights reserved. Intermec is a
registered trademark of Intermec
Technologies Corporation.
All other trademarks are the
property of their respective
owners. Printed in the U.S.A.
611895-02A 07/08
/