Accessories Guide
CK
3
RFID-Ready Snap-On Adapter
Accessory Name Part Number Description
IP30 Part Number
available in August
Snaps onto the bottom of CK3 Series
devices as a passive UHF RFID handle.
Docks and Modules
Accessory Name Part Number Description
Single Dock 871-228-001 USB Host and Client Support with bay
for charging an auxiliary battery pack.
Requires Power Supply 851-061-207 and
country specific AC power cord. Optional:
Single Dock Ethernet Modules.
Multi-Dock, Ethernet
(Photo Pending)
871-229-002 4-slot Ethernet dock provides extra
port allowing for ability to link up
to three (3) multi-docks. Requires
Power Supply 851-064-006 and
country-specific AC power cord.
Multi-Dock, Charge Only
(Photo Pending)
871-229-001 Allows for charging up to 4 devices.
Requires power supply 851-064-006 and
country specific power cord.
Vehicle Dock 871-231-001 Securely holds CK3 and provides
power. Cabled RS232 (5V pwr on
pin 9) or USB Host support is also
available. Requires use of Intermec
RS232 Serial cable (p/n 225-737-001) or
Intermec USB cable (VE011-2016).
The CK3 Series vehicle dock uses the same
mounting system (p/n 805-611-001) and
vehicle power kits (p/n 851-065-105) as
the CN3 & 700 Series vehicle dock.
Non-Powered Vehicle Holder 871-236-001 Securely holds CK3.
IP30 Vehicle Holder
(Photo Pending)
871-237-001 Non-Powered vehicle holder to
hold CK3 with IP30 attached.
Single Dock Ethernet Module
(Photo Pending)
871-025-101 CK3 Series Ethernet Module interfaces with
USB Host connector on Single Dock.
Accessories Guide
CK
3
Holsters & Handles
Accessory Name Part Number Description
Standard Belt Holster –
no handle
825-198-001 Rugged lightweight holster with belt
designed for use with handheld applications
where scan handle is not required.
Standard Belt Holster –
with handle
825-199-001 Rugged lightweight holster with
belt designed for use with handheld
applications requiring a scan handle.
Scan Handle
203-879-001 Customer installable scan handle
(replaces the hand strap).
Snap-On Adapters
Accessory Name Part Number Description
Snap-On RS-232 Adapter
(Photo Pending)
850-815-001 Enables RS232 support from bottom
of CK3. Must order cables separately.
Adapter provides DB9M connector and 5V
power on pin-9 for tethered scanners.
Snap-On Audio Adapter
(Photo Pending)
850-816-001 Provides 3.5mm standard audio
jack for use of wired headset.
Snap-On Power Adapter
(Photo Pending)
850-817-001
Recommended for in-field charging solutions
not requiring vehicle dock. Supports
use of auto power charger 852-043-003
or AC power supply 851-065-105.
2
Accessories Guide
CK
3
Batteries & Chargers
Accessory Name Part Number Description
Standard Capacity
Battery Pack
318-033-001
One (1) rechargeable 7.4 watt hours (2000
mAh) standard battery pack for the CK3.
Extended Capacity
Battery Pack
318-034-001 One (1) rechargeable 18.5 watt hours (5100
mAh) extended battery pack for the CK3.
Quad Battery Charger 871-230-001
Charges four CK3 Series battery packs.
Requires Power Supply 851-061-207 and
country-specific AC power cord. Charges
both standard and extended batteries.
Cables
Accessory Name Part Number Description
USB-A to USB-microB, 1M 236-209-001 Use with CK3 Series Single Dock
(871-228-001) or Vehicle Dock USB
Adapter Cable for ActiveSync (VE011-2016)
connection to PC USB port.
Power Supplies & Adapters
Accessory Name Part Number Description
Universal Power Supply,
12VDC, Output
851-064-006 Use with CK3 Series Multi-docks
(871-228-001 & 871-028-002). Order
country-specific AC power cord separately.
Universal Power Supply,
12VDC/30W, Output
851-061-207 Use with CK3 Series Single Dock
(871-228-001) or CK3 Series Quad Battery
Charger (871-230-001). Order country-
specific AC power cord separately.
3
Accessories Guide
CK
3
4
Power Supplies & Adapters (continued)
Accessory Name Part Number Description
Universal Power Supply, 5V 851-065-105 AC power supply with barrel jack. Allows
charging of CK3 Series devices without a
dock. Requires use of CK3 Series Snap-
on Power Adapter (850-557-001). Order
country-specific AC power cord separately.
Auto Power Adapter
(Photo Pending)
852-043-003 For use with Cigarette Lighters. Barrel jack
that allows charging of CK3 handheld.
Requires use of CK3 Series Snap-on
Power Adapter (850-557-001).
Replacement Parts
Accessory Name Part Number Description
Cable Retainer
Replacement Kit
203-810-001 Contains five (5) sets of Cable Retainers
used to secure USB connections.
Screen Cleaner Kit,
Pre-Moistened Wipes
346-065-101 Includes 24 pre-moistened, non-
abrasive, non-streaking 4”x7” wipes.
Screen Protector,
10 Each
346-069-107 Contains ten (10) self-adhesive
screen protectors.
Copyright © 2008 Intermec
Technologies Corporation. All
rights reserved. Intermec is a
registered trademark of Intermec
Technologies Corporation.
All other trademarks are the
property of their respective
owners. Printed in the U.S.A.
611895-02A 07/08
-
1
-
2
-
3
-
4
Intermec 318-033-001 Datasheet
- Type
- Datasheet
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Intermec 318-046-011 User manual
-
-
-
-
-
Intermec EHA-CK3DHIB User manual
-
-
-
-
