Buffalo GSORIG Owner's manual

Type
Owner's manual

This manual is also suitable for

Assembling GSORIG Outriggers to GSSI Scaffolding
The outriggers and steel bolts
are placed OUTSIDE the leg of
the GSSI.
Do not try to insert the steel bolts
into the holes of the GSSI support leg.
Attach the clamp to the bolt,
and securely tighten it.
Repeat this process
on all four support legs.
Be certain that
all Outriggers
are securely
tightened.
Double check
that each bolt
has been secured
before using
the scaffold.
WARNING
Inside View
Tighten
This Clamp
Outside View
Tighten
This Clamp
Support
Bracket
Support
Bracket
  • Page 1 1

Buffalo GSORIG Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI