Buffalo GSORIG Owner's manual

Assembling GSORIG Outriggers to GSSI Scaffolding

The outriggers and steel bolts

are placed OUTSIDE the leg of

the GSSI.

Do not try to insert the steel bolts

into the holes of the GSSI support leg.

Attach the clamp to the bolt,

and securely tighten it.

Repeat this process

on all four support legs.

Be certain that

all Outriggers

are securely

tightened.

Double check

that each bolt

has been secured

before using

the scaffold.

WARNING

Inside View

Tighten

This Clamp

Outside View

Tighten

This Clamp

Support

Bracket

Support

Bracket

This manual is also suitable for

Download PDF