Disney PC100CDE User manual

Brand: Disney

Model: PC100CDE

Category: Headphone amplifiers

Type: User manual

GB-1

SAFETY PRECAUTIONS

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE OPERATING

THIS UNIT.

WARNING

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

The appratus should not be exposed to dripping or splashing and that no objects

filled with liquids, such as vases, shall be placed on the apparatus. The

ventillation should not be impeded by covering the ventillation openings with

items, such as newspapers, table-cloths, curtains, etc. No naked flamed

sources, such as lighted candles, should be placed on the apparatus.

DANGER

SAFETY PRECAUTIONS

1. Do not open the cabinet. Refer servicing to qualified personnel only.

2. Do not expose to excessive heat, direct sunlight, dust, moisture, vibration

or shock.

3. Use ONLY the AC adapter required; others may damage your unit. Discon-

nect from the wall outlet when the set is not to be used for an extended

period of time.

When cleaning your unit, use a soft dry cloth, do not use solvents or

commercially available cleaners as they may damage or discolor the finish.

5. Do not wear headphones while operating a motor vehicle, this could create

a traffic hazard and is illegal in many areas.

6. The headphones supplied with your unit provide superior stereo listening

while allowing you to hear outside sounds when listening at normally low

volume levels. Listening at extremely high volume levels minimizes the

intrusion of outside noise/sounds.

7. If you notice that the sound has become weak or distorted, this is an

indication that your batteries are low. Replace with new or recharged batter-

ies (see “BATTERY OPERATION ” ).

LASER SAFETY

This unit employs an optical laser beam system in

the CD mechanism, designed with built-in safeguards.

Do not attempt to disassemble; refer to qualified

service personnel. Exposure to this invisible laser

light beam may be harmful to the human eye.

THIS IS A CLASS-1 LASER PRODUCT. USE OF

CONTROLS, OR ADJUSTMENTS OR PROCE-

DURES OTHER THAN THOSE SPECIFIED

HEREIN, MAY RESULT IN HAZARDOUS LASER

LIGHT BEAM EXPOSURE.

INVISIBLE LASER RA-

DIATION WHEN OPEN

AND INTERLOCK

FAILED OR

DEFEATED. AVOID DI-

RECT EXPOSURE TO

LASER BEAM.

GB-2

QUICK REFERENCE

LCD DISPLAY INFORMATION

WHEN POWER IS ON

If a disc is in, auto adjustment starts. During adjustment, display shows - -.

! If no disc, Er is displayed. Put the disc in and close the lid. Auto adjust-

ment starts.

! If the lid is opened, display shows - -. Closing the lid starts auto adjustment.

! If disc player is unable to read TOC then Er is displayed.

Note: TOC means Table Of Contents.

! When TOC data has been read, display shows TOC for 1 second.

! Starts play from track No.1 automatically. ESP starts flashing.

Press ESP key, then ESP disappears on display, and ESP is turned off.

HOLD SWITCH

! This switch prevents accidental selection of an unwanted function during

Playback or Stop mode.

! In the HOLD “ON” position, no function button on the unit can be

operated. (except OPEN).

Moving the swtich to the “OFF” postion will allow the unit to

return to normal operation.

! Set the HOLD switch to “OFF” position before operating the unit.

NORMAL PLAYBACK

Play the whole disc. Set the HOLD switch to OFF position to allow normal

operation. A

indicator appears on the display when the batteries need

to be changed.

TO PLAY FROM STOP CONDITION

Press the PLAY/PAUSE button, the display changes to 01 and starts play.

! When the memory is full, ESP stops flashing.

TO STOP

Press the STOP key. This will stop play and the TOC will be displayed.

TO PAUSE

Press the PLAY/PAUSE and the pause on/off button alternately. On pause

condition, track no. on the display will flash.

REPEAT PLAY

Every time the MODE button is pressed, the corresponding mode appears

in the display window.

GB-3

INTRO PLAY

1. Press the MODE button three times and INT is displayed.

2. Press the PLAY/PAUSE button.

Starts INTRO

play from track no.01.

Select INTRO mode during play and INT starts

flashing.

! Press the PLAY/PAUSE button. Flashing stops and starts INTRO play

from track no. 01.

! Press >>I to play the current track. Flashing stops and starts INTRO

play from next track.

! Press I<<, flashing stops and starts INTRO play from current track.

! INTRO plays the first 10 sec of every track.

RANDOM PLAY

Enables all the tracks on a disc to be played in a Random (Shuffle) sequence.

Press the MODE button four times and RND

will be displayed.

2. Press the PLAY/PAUSE button, The track No. is

selected at random and

will begin to

play.

3. To select RANDOM mode during play, press the MODE button four times.

! Press the PLAY/PAUSE button I<< or >>I.

RND flashing on the display

stops and RANDOM play begins.

QUICK REFERENCE (CONTINUED)

SEARCH FUNCTION

Locating a Particular track

To go back to the beginning of the

current or a previous track

To go to beginning of following track

Press I<< lightly and repeatedly.

Press >>I lightly and repeatedly.

Locating a Particular Point in a track

To search backward at high speed

To search forward at high speed

Keep I<< depressed

Keep >>I depressed

Shown on the LCD display. The

current track on the disc will be

played repeatedly.

Shown on the LCD display. All

tracks on the disc will

be played

repeatedly.

NOTE: In normal mode, none of the above symbols will be shown in the

display.

GB-4

LOCATION CONTROLS

1. Volume Control

2. Headphones Jacks

3. ESP Anti-Skip Button

4. LCD Display

5. Mode Button

6. Stop/Power Off Button

7. CD Door Open Switch

8. Play/Pause/Power On Button

9. Skip Backward Button

10. Skip Forward Button

11. Battery Door

12. Strap loop and swivel

13. Hold On/Off Switch

14. DC Input Jack

15. Lid Open

GB-5

Battery Power Operation

1. Open the battery compartment

cover and insert two “AA” alka-

line batteries inside the battery

compartment. Follow the polar-

ity as indicated (batteries not

included) in the battery

compartment.

2. Close the battery compartment

cover.

AC Operation (AC adaptor not included)

1. Insert the DC plug, at the end of the AC adaptor (not included) cord into

the DC input jack.

2. Plug the AC adaptor (not included) into AC power outlet socket. Use only

with the 6V AC adaptor required and make sure the local voltage corre-

sponds to the adaptors required AC input voltage.

Note: If the AC plug of this unit does not fit in your AC outlet, a plug adaptor

should be used. Consult your local dealer on the type of plug adaptor

required.

LOW BATTERY ALERT

When the Batt. Indicator appears in the LCD panel, this means that the

batteries are losing their charge. In this case the CD player will not function

properly and the batteries must be replaced.

- Do not attempt to recharge, short-circuit, disassemble, heat or expose to

fire.

- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-

cadmium) batteries.

- When inserting new batteries, replace all at the same time. Do not mix old

and new batteries.

- Weak batteries can leak and severely damage the unit.

- Dispose of batteries according to local environmental laws.

POWER SOURCE

GB-6

OPERATION

BASIC DISC PLAY

Set the HOLD switch to OFF position to allow normal operation.

This CD-player can play Audio Discs such as CD-Recordables. Do not try to

play a CD-ROM, CDi, VCD, DVD or computer CDs.

1. Connect the headphones to the PHONES (GREEN) socket.

2. Press the OPEN button to open the CD compartment lid.

3. Adjust the VOLUME to minimum.

4. Insert the disc with the label side facing up.

5. Close the lid securely until a click is heard.

6. Press the PLAY button to start playing.

7. Adjust the volume to desired level.

Turning Power on and off

This unit has no ON/OFF switch. To turn on and off, press the following buttons.

To turn on: Press >II PLAY/PAUSE (playback starts).

To turn off: Press " STOP button once for standby mode.

Press " STOP button twice to turn off the power.

Auto power-off function

When the unit is stopped (standby mode)

for approximately

30 seconds, the

power will automatically turn off.

LISTENING WITH HEADPHONES

Connect the plug of the stereo headphones into the PHONES (GREEN) socket.

Two sets of headphones can be plugged into the CD player.

Caution:

Avoid excessive volume level and listening to sound for

a long period

of time

when using earphones.

Adjust volume to the desired level.

GB-7

CARE AND MAINTENANCE

CLEANING DISCS

! Fingerprints should be carefully wiped

from the surface of disc with a sof

cloth.

Unlike conventional records,

compact

discs

have no grooves to

collect

dust and

microscopic

debris,

so gently wiping them

with a soft cloth

should remove most

particles

. Wipe

in a

straight motion from

the center

to the edge.

Never use thinner, benzine, record cleaner

or anti-static spray on a

compact disc.

Such chemicals can damage its plastic

surface.

MAINTENANCE

Cleaning the Cabinet

Wipe with a soft cloth. If the cabinet i

s very dirty, dampen the cloth with a weak

solution of neutral detergent and water, and then wipe clean.

Cleaning the Lens

A dirty lens will cause sound skipping and if the lens is very dirty, the CD may

not work. Open the disc cover and clean the lens as below:

! Dust or Dry Particles

Using a camera lens brush/blower

, blow

on the lens several times and

wipe it lightly

with the brush to remove dust. Blow on

the lens one more

time.

! Fingerprints

If the lens cannot be

cleaned by using

brush/blower,

se a dry

cot

ton

swab

starting from the

middle and working to the outside edge.

GB-8

CARE AND MAINTENANCE (CONTINUE)

HANDLING COMPACT DISCS

This unit is

designed to play only

compact

discs bearing the identification

logo below.

Other discs may not conform to the CD

standard and may not play properly.

! Dirty, scratched or warped discs may

cause skipping or noise.

! Handle the disc only by the edges. To

keep clean, do not touch its surface.

! Discs should be stored in their cases

after use to avoid serious scratches.

! Do not expose disc to direct sunlight,

high humidity, high temperature, dust,

etc. Pro- longed exposure to extreme

temperatures can warp the disc.

! Do not stick or write anything on ei-

ther side of disc. Sharp writing in-

struments or the inks used in some

felt tip pens may damage its surface

Remove the disc

Hold the edge and gently press the center pivot as illustrated to pick up the

disc.

CAUTION:

Wait for the disc to stop rotating before pressing the OPEN button.

Note: This unit can play 3” (8cm) single CDs

without an adaptor (not included).

Do not use a C

D single

adaptor for these discs.

INSERT WITH

THE LABEL

FACING UP.

PRESS THE CLAWS

AT THE CENTER OF

THE DISC CASE.

PRESS THE

DISC GENTLY

TO INSERT IT.

LIFT OUT WITHOUT

TOUCHING THE

RECORDED SURFACE

INCORRECT

CORRECT

FROM THE CENTER TO THE EDGE

INCORRECT

GB-9

TROUBLESHOOTING GUIDE

If you experience a problem with this unit, check the chart below before calling

for service.

SYMPTOM

Unit will not turn on.

Disc will not play.

Erratic CD playback.

No sound from

headphones.

CAUSE

HOLD switch is “ON”

Weak or dead batteries

or inserted incorrectly.

Weak or dead Re-

chargeable batteries.

AC adapter not

connected.

CD compartment not

closed.

Disc inserted

incorrectly.

Dirty or defective disc.

Moisture condensation

on disc.

Dirty or defective disc.

Headphone plug not in-

serted fully.

VOLUME control set to

minimum.

Weak batteries.

Defective disc.

SOLUTION

Set the HOLD switch to

OFF position to allow nor-

mal operation.

Replace batteries and insert

correctly.

Recharge or replace batter-

ies (if used).

Check AC adapter

connection.

Close CD compartment.

Reinsert disc correctly.

Try another disc.

Wipe disc with soft cloth.

Clean or replace disc.

Reinsert headphone plug

fully.

Increase volume level.

Replace batteries.

Try another disc.

GB-10

SPECIFICATIONS

PRODUCT SPECIFICATIONS

System..........................Compact disc digital audio system

Laser diode.................. Material: GaAIAs

Properties.....................Wavelengh: λ=780mm

Emission duration: continuous

Laser output: <44.6 µW

Error correction............Cross-interleave Reed-solomon code

AUDIO

D/A conversion.............DAC four times oversampling

Frequency response....20-20,000Hz

Wow and flutter...........Below measurable limits

No. of Channel..............2 Channels (Stereo)

Output level.................. Phones: 15 mW (32Ω)

GENERAL

Power requirements.....-2x “AA” alkaline battery (not included)

-DC in 6V 300 mA jack accepts AC power

adapter (not included) (center positive)

with plug type EIAJ, center hole φ1.7mm,

outside φ4.0mm

Power consumption.....0.8W (DC 3V) under normal condition

Dimension....................Approx. 140 (W) x 28.5 (H) x 153.5 (D) mm

Weight......................... Approx. 230g not including battery

* Design and specification are subject to change without notice.

Disney PC100CDE User manual

Brand: Disney

Model: PC100CDE

Category: Headphone amplifiers

Type: User manual

Download PDF

report

Disney PC100CDE User manual

Disney PC100CDE User manual

Other documents