Black & Decker KD970K Owner's manual

Page is loading ...

4

Intended use

Your Black & Decker rotary hammer drill has been designed

for drilling in wood, metal, plastics, and masonry as well as

for screwdriving and light chiselling applications.

General safety rules

Warning! Read all instructions. Failure to follow all instructions

listed below may result in electric shock, fire and/or serious

injury. The term “power tool” in all of the warnings listed

below refers to your mains operated (corded) power tool or

battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS.

1. Work area

a. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

b. Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases

or dust. Power tools create sparks which may ignite the

dust or fumes.

c. Keep children and bystanders away while

operating a power tool. Distractions can cause you to

lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs

with earthed (grounded) power tools. Unmodified

plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the

risk of electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the influence

of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in

serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in

the off position before plugging in. Carrying power

tools with your finger on the switch or plugging in power

tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool

in unexpected situations.

f. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g. If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of these

devices can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power

tool for your application. The correct power tool will do

the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source before

making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

ENGLISH

5

ENGLISH

f. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Features

This tool includes some or all of the following features.

1. Variable speed switch

2. Lock-on button

3. Forward/reverse switch

4. Drilling mode selector

5. Tool holder

6. Side handle

7. Depth stop

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting the side handle and depth stop (fig. A)

◆ Turn the grip counterclockwise until you can slide the side

handle (6) onto the front of the tool as shown.

◆ Rotate the side handle into the desired position.

◆ Insert the depth stop (7) into the mounting hole as shown.

◆ Set the depth stop to the desired position. The maximum

drilling depth is equal to the distance between the tip of

the drill bit and the front end of the depth stop.

◆ Tighten the side handle by turning the grip clockwise.

Fitting an SDS-plus

®

accessory (fig. B)

◆ Clean and grease the shank (9) of the accessory.

◆ Pull back the sleeve (10) and insert the shank into the tool

holder (6).

◆ Push the accessory down and turn it slightly until it fits

into the slots.

◆ Pull on the accessory to check if it is properly locked.

The hammering function requires the accessory to be able

to move axially several centimetres when locked in the

tool holder.

◆ To remove the accessory, pull back the sleeve (10) and

pull out the accessory.

KD970KA/KD980KA - Fitting the keyed chuck (fig. C)

◆ Fit the SDS-plus

®

shank (11) of the supplied chuck (12)

into the tool holder as described above.

Warning! Never use standard chucks in the hammer drilling

mode.

Fitting accessories in the keyed chuck (fig. D)

◆ Open the chuck by turning the sleeve (13).

◆ Insert the bit shaft (14) into the chuck.

◆ Insert the chuck key (15) into each hole (16) in the side of

the chuck and turn until tight.

Use

Warning! Let the tool work at its own pace. Do not overload.

Warning! Before drilling into walls, floors or ceilings, check

for the location of wiring and pipes.

KD970 - Selecting the operating mode (fig. E)

The tool can be used in two operating modes. Rotate the

drilling mode selector (5) towards the required position, as

indicated by the symbols.

Drilling

◆ For drilling in steel, wood and plastics, and for screwdriving

set the operating mode selector (5) to the position.

◆ When screwdriving, start at a low speed.

Hammer drilling

◆ For hammer drilling in masonry and concrete, set the

operating mode selector (5) to the position

◆ When hammering, the tool should not bounce and run

smoothly. If necessary, increase the speed.

KD980 - Selecting the operating mode (fig. F)

The tool can be used in three operating modes. Rotate the

drilling mode selector (5) towards the required position, as

indicated by the symbols.

Drilling

◆ For drilling in steel, wood and plastics, and for screwdriving

set the operating mode selector (5) to the position.

◆ When screwdriving, start at a low speed.

6

ENGLISH

Hammer drilling

◆ For hammer drilling in masonry and concrete, set the

operating mode selector (5) to the position

◆ When hammering, the tool should not bounce and run

smoothly. If necessary, increase the speed.

Chiselling

◆ For chiselling with spindle lock and for light chipping, set

the operating mode selector (5) to the

position.

◆ Make sure the forward/reverse switch is in the forward

position.

◆ When changing from hammer drilling to chiselling,

turn the chisel to the desired position. If resistance is felt

during mode change, slightly turn the chisel to engage the

spindle lock.

Selecting the direction of rotation

For drilling, for tightening screws and for chiselling, use

forward (clockwise) rotation. For loosening screws or removing

a jammed drill bit, use reverse (counterclockwise) rotation.

◆ To select forward rotation, push the forward/reverse

slider (3) to the left.

◆ To select reverse rotation, push the forward/reverse slider

to the right.

Warning! Never change the direction of rotation while the

motor is running.

Setting the drilling depth (fig. G)

◆ Slacken the side handle (6).

◆ Set the depth stop (7) to the desired position. The maximum

drilling depth is equal to the distance between the tip of

the drill bit and the front end of the depth stop.

◆ Tighten the side handle (6).

Switching on and off

◆ To switch the tool on, press the variable speed switch (1).

The tool speed depends on how far you press the switch.

◆ For continuous operation, press the lock-on button (2) and

release the variable speed switch. This option is available

only in forward (clockwise) rotation.

◆ To switch the tool off, release the variable speed switch.

To switch the tool off when in continuous operation,

press the variable speed switch once more and release it.

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the performance

of your tool. By using these accessories you will get the very

best from your tool.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

◆ Regularly clean the ventilation slots with a clean,

dry paint brush.

◆ To clean the tool, use only mild soap and a damp cloth.

Never let any liquid get inside the tool and never immerse

any part of the tool into liquid.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

◆ Safely dispose of the old plug.

◆ Connect the brown lead to the live terminal in the new plug.

◆ Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality

plugs. Recommended fuse: 5 A.

Protecting the environment

Black & Decker provides a facility for recycling

Black & Decker products once they have reached the

end of their working life. This service is provided

free of charge. To take advantage of this service

please return your product to any authorised repair

agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of our

after-sales service and contacts are available on the Internet

at: www.2helpU.com

Technical data

KD970 KD980

Voltage V

AC

230 230

Power input W 600 650

No-load speed min

-1

0 - 1,000 0 - 1,000

Load speed min

-1

0 - 820 0- 820

Impact rate min

-1

0- 4,000 0- 4,000

Impact energy J 2.0 2.2

Tool holder SDS-plus

®

SDS-plus

®

Max. drilling capacity

Concrete mm 22 24

Steel mm 13 13

Wood mm 30 30

Core drilling capacity in soft brick mm - 65

Chiselling no yes

Weight kg 2.3 2.3

7

ENGLISH

EC declaration of conformity

KD970/KD980

Black & Decker declares that these products conform to:

98/37/EC, 89/336/EEC, EN 60745, EN 55014

L

pA

(sound pressure) 97 dB(A), L

WA

(acoustic power) 105 dB(A),

hand/arm weighted vibration 10 m/s

2

K

pA

(sound pressure uncertainty): 3 dB(A),

K

WA

(acoustic power uncertainty) 3 dB(A)

Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG,

United Kingdom

1-6-2004

Guarantee

Black & Decker is confident of the quality of its products and

offers an outstanding guarantee. This guarantee statement is

in addition to and in no way prejudices your statutory rights.

The guarantee is valid within the territories of the Member

States of the European Union and the European Free Trade

Area.

If a Black & Decker product becomes defective due to faulty

materials, workmanship or lack of conformity, within 24 months

from the date of purchase, Black & Decker guarantees to

replace defective parts, repair products subjected to fair wear

and tear or replace such products to ensure minimum

inconvenience to the customer unless:

◆ The product has been used for trade, professional or hire

purposes;

◆ The product has been subjected to misuse or neglect;

◆ The product has sustained damage through foreign

objects, substances or accidents;

◆ Repairs have been attempted by persons other than

authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of

purchase to the seller or an authorised repair agent. You can

check the location of your nearest authorised repair agent by

contacting your local Black & Decker office at the address

indicated in this manual. Alternatively, a list of authorised

Black & Decker repair agents and full details of our after-sales

service and contacts are available on the Internet at:

www.2helpU.com

Please visit our website www.blackanddecker.co.uk to

register your new Black & Decker product and to be kept up to

date on new products and special offers. Further information

on the Black & Decker brand and our range of products is

available at www.blackanddecker.co.uk

Page is loading ...

53

TYP

1

WWW.

2

h

e

l

p

U.

com

02

-

07

-

04

E

13976

K

D

970

K

124

116

121

174

101

149

148

147

146

156

161

160

159

155

154

138

139

140

142

143

144

166

167

168

162

163

164

165

169

102

816

108

109

104

106

115

117

118

119

120

122

125

126

113

800

107

104

127

128

114

175

145

123

115

103

172

171

173

170

817

130

136

137

178

150

177

152

134

105

180

179

182

183

133

110

54

TYP

1

WWW.2helpU.com

02-07-04

E13977

KD980K

124

116

121

174

101

149

148

147

146

156

161

160

159

155

154

158

138

139

140

142

143

144

166

167

168

162

163

164

165

169

102

816

108

109

104

106

115

117

118

119

120

122

125

126

113

800

107

104

127

128

130

114

175

145

181

123

115

103

172

171

173

170

185

184

817

137

178

150

177

152

134

157

105

180

179

182

183

133

110

Page is loading ...

59

koneesi?

◆

E›Ó·È ÙÔ ÂÚÁ·ÏÂ›Ô ·˘Ùﬁ Ë

ÚÒÙË Û·˜ ·ÁÔÚ¿?

◆

Yes

◆

Ja

◆

Oui

◆

Si

◆

Ja

◆

Sí

◆

Sim

◆

Ja

◆

Ja

◆

Ja

◆

Kyllä

◆

¡·È

◆

No

◆

Nein

◆

Non

◆

No

◆

Nee

◆

No

◆

Não

◆

Nej

◆

Nei

◆

Nej

◆

Ei

◆

√¯È

◆

Dealer address

◆

Händleradresse

◆

Cachet du revendeur

◆

Indirizzo del

rivenditore

◆

Adres van de dealer

◆

Dirección del detallista

◆

Morada do

revendedor

◆

Återförsäljarens adress

◆

Forhandlerens adresse

◆

Forhandler adresse

◆

Jälleenmyyjän osoite

◆

¢ÈÂ‡ı˘ÓÛË ·ÓÙÈÚÔÛÒÔ˘

..........................................................................

Cat. no.:

✍

◆

Is this tool a gift?

◆

Ist dieses Gerät ein

Geschenk?

◆

S’agit-il d’un cadeau?

◆

Si tratta

di un regalo?

◆

Kreeg u de machine als cadeau?

◆

¿Ha recibido usted esta herramienta como

regalo?

◆

Recebeu esta ferramenta como

presente?

◆

Är verktyget en gåva?

◆

Er verktøyet en gave?

◆

Er verktøjet en gave?

◆

Onko kone lahja?

◆

∆Ô ÂÚÁ·ÏÂ›Ô Â›Ó·È ‰ÒÚÔ?

◆

Yes

◆

Ja

◆

Oui

◆

Si

◆

Ja

◆

Sí

◆

Sim

◆

Ja

◆

Ja

◆

Ja

◆

Kyllä

◆

¡·È

◆

No

◆

Nein

◆

Non

◆

No

◆

Nee

◆

No

◆

Não

◆

Nej

◆

Nei

◆

Nej

◆

Ei

◆

√¯È

◆

Is this tool your first purchase?

◆

Ist dieses

Gerät ein Erstkauf?

◆

Est-ce un 1er achat?

◆

Questo prodotto è il suo primo acquisto?

◆

Is

deze machine uw eerste aankoop?

◆

¿Es esta

herramienta la primera de este tipo?

◆

Esta ferramenta é a sua primeira compra?

◆

Är detta ditt första B&D-verktyg?

◆

Er dette ditt

første B&D verktøy?

◆

Er dette dit første B&D

verktøj?

◆

Onko tämä ensimmäinen B&D-

Dealer address Date of purchase

Händleradresse Kaufdatum

Cachet du revendeur Date d’achat

Indirizzo del rivenditore Data d’acquisto

Adres van de dealer Aankoopdatum

Dirección del detallista Fecha de compra

Morada do revendedor Data de compra

Återförsäljarens adress Inköpsdatum

Forhandlerens adresse Innkjøpsdato

Forhandler adresse Indkøbsdato

Jälleenmyyjän osoite Ostopäivä

¢ÈÂ‡ı˘ÓÛË ·ÓÙÈÚÔÛÒÔ˘ ∏ÌÂÚÔÌËÓ›· ·ÁÔÚ¿˜

✁

◆

Name

◆

Name

◆

Nom

◆

Nome

◆

Naam

◆

Nombre

◆

Nome

◆

Namn

◆

Navn

◆

Navn

◆

Nimi

◆

√ÓÔÌ·:

..........................................................................

◆

Address

◆

Adresse

◆

Adresse

◆

Indirizzo

◆

Adres

◆

Dirección

◆

Morada

◆

Adress

◆

Adresse

◆

Adresse

◆

Osoite

◆

¢ÈÂ‡ı˘ÓÛË:

..........................................................................

◆

Town

◆

Ort

◆

Ville

◆

Cittá

◆

Plaats

◆

Ciudad

◆

Localidade

◆

Ort

◆

By

◆

By

◆

Paikkakunta

◆

¶ﬁÏË:

..........................................................................

◆

Postal code

◆

Postleitzahl

◆

Code postal

◆

Codice postale

◆

Postcode

◆

Código

◆

Código postal

◆

Postnr.

◆

Postnr.

◆

Postnr.

◆

Postinumero

◆

∫ˆ‰ÈÎﬁ˜

..........................................................................

◆

Data protection act: Tick the box if you prefer

not to receive further information.

◆

Bitte

ankreuzen, falls Sie keine weiteren

Informationen erhalten möchten.

◆

Si vous ne

souhaitez pas recevoir d’informations, cochez

cette case.

◆

Barrate la casella se non

desiderate ricevere informazioni.

◆

A.u.b. dit vakje aankruisen indien u geen

informatie wenst te ontvangen.

◆

Señale en la casilla sino quiere recibir

información.

◆

Por favor, assinale com uma cruz

se não desejar receber informação.

◆

Vänligen

kryssa för i rutan om Ni inte vill ha information.

◆

Vennligst kryss av dersom du ikke ønsker

informasjon.

◆

Venligst sæt kryds i ruden

såfremt De ikke måtte ønske at modtage

information.

◆

Merkitkää rasti ruutuun, mikäli ette halua

vastaanottaa informaatiota.

◆

¶·Ú·Î·ÏÂ›ÛÙÂ Ó· ÛËÌÂÈÒÛÂÙÂ Â¿Ó ‰ÂÓ ı¤ÏÂÙÂ

Ó· ¿ÚÂÙÂ ÏËÚÔÊÔÚ›Â˜.

60

◆

GUARANTEE CARD

◆

GARANTIEKARTE

◆

CARTE DE GARANTIE

◆

TAGLIANDO DI GARANZIA

◆

GARANTIEKAART

◆

TARJETA DE GARANTÍA

◆

CARTÃO DE GARANTIA

◆

GARANTIBEVIS

◆

GARANTI KORT

◆

GARANTI KORT

◆

TAKUUKORTTI

◆

∫∞ƒ∆∞ E°°À∏™∏™

Português Por favor, recorte esta parte, coloque-a num envelope selado e

endereçado e envie-o logo após a compra do seu produto para o

endereço da Black & Decker do seu país.

Svenska Var vänlig klipp ur denna del och sänd den i ett frankerat kuvert till

Black & Deckers adress i Ditt land.

Norsk Vennligst klipp ut denne delen umiddelbart etter du har pakket ut

ditt produkt og legg det i en adressert konvolutt til Black & Decker

(Norge) A/S.

Dansk Venligst klip denne del ud og send frankeret til Black & Decker

i dit land.

Suomi Leikkaa irti tämä osa, laita se kuoreen ja postita kuori paikalliseen

Black & Decker osoitteeseen.

EÏÏËÓÈÎ· ¶·Ú·Î·ÏÒ Îﬁ„ÂÙÂ ·˘Ùﬁ ÙÔ ÎÔÌÌ¿ÙÈ Î·È Ù·¯˘‰ÚÔÌ‹Û·ÙÂ ÙÔ ·Ì¤Ûˆ˜

ÌÂÙ¿ ÙËÓ ·ÁÔÚ¿ ÙÔ˘ ÚÔ˚ﬁÓÙÔ˜ Û·˜ ÛÙËÓ ‰ÈÂ‡ı˘ÓÛË ÙË˜

Black & Decker ÛÙËÓ EÏÏ¿‰·

.

English Please complete this section immediately after the purchase of your

tool and send it to Black & Decker in your country. If you live in

Australia or New Zealand, please register by using the alternative

guarantee card supplied.

Deutsch Bitte schneiden Sie diesen Abschnitt ab, stecken ihn in einen

frankierten Umschlag und schicken ihn an die Black & Decker

Adresse Ihres Landes.

Français Découpez cette partie et envoyez-la sous enveloppe timbrée à

l’adresse de Black & Decker dans votre pays, ceci immédiatement

après votre achat.

Italiano Per favore ritagliate questa parte, inseritela in una busta con

francobollo e speditela subito dopo l’acquisto del prodotto

all’indirizzo della Black & Decker nella vostra nazione.

Nederlands Knip dit gedeelte uit en zend het direct na aankoop in een

gefrankeerde, geadresseerde envelop naar het adres van

Black & Decker in uw land.

Español Después de haber comprado su herramienta envíe usted, por favor,

esta tarjeta a la central de Black & Decker en su país.

✁

589288-00

06/04

Black & Decker KD970K Owner's manual

Black & Decker KD970K Owner's manual

in other languages

Related papers

Other documents