Sony HT-CT770 Quick start guide
- Category
- Bluetooth music receivers
- Type
- Quick start guide
The Sony HT-CT770 is a versatile home audio system that elevates your entertainment experience with its powerful sound and connectivity options. This soundbar boasts a sleek design that complements any living space, delivering immersive audio for movies, music, and gaming. With an array of sound modes, including Standard, Movie, Sports, Game, and Music, you can optimize the acoustics to suit your content. Additionally, the Night mode ensures clear dialogue even at low volumes, making it ideal for late-night viewing.
The Sony HT-CT770 is a versatile home audio system that elevates your entertainment experience with its powerful sound and connectivity options. This soundbar boasts a sleek design that complements any living space, delivering immersive audio for movies, music, and gaming. With an array of sound modes, including Standard, Movie, Sports, Game, and Music, you can optimize the acoustics to suit your content. Additionally, the Night mode ensures clear dialogue even at low volumes, making it ideal for late-night viewing.
HT-CT770 4-488-971-51(1)
HT-CT770
Sound Bar
Startup Guide
Startup Guide GB
Guide de démarrage FR
⼊⾨指南 CT
Page is loading ...
3
HT-CT770 4-488-971-51(1)
Table of contents / Table des matières / 目錄
Setup / Configuration / 設定
1 What’s in the box / Contenu de l’emballage / 包裝箱內容
4
2 Installation / Installation / 安裝
5
3 Connection / Connexion / 連線
6
4 Turning on the system / Mise sous tension du système / 開啟系統
8
5 Listening to the sound / Écoute de sources sonores / 聆聽聲音
9
Basic Operations / Opérations de base / 基本操作
Enjoying the sound effects / Profiter des effets sonores / 享受音效
10
Listening to the sound from BLUETOOTH devices /
Écoute de sources sonores provenant de périphériques BLUETOOTH /
從BLUETOOTH裝置聆聽聲音
12
Refer to the supplied Operating Instructions for more information on other features.
Pour plus d’informations sur les autres fonctions, reportez-vous au Mode d’emploi fourni.
其他功能的詳細資訊，請參閱隨附的使用說明書。
4
HT-CT770 4-488-971-51(1)
Bar Speaker (1)
Enceinte-barre (1)
主動式揚聲器系統（1）
Subwoofer (1)
Caisson de graves (1)
主動式重低音揚聲器（1）
Remote control (1)
Télécommande (1)
遙控器（1）
R6 (size AA) batteries (2)
Piles R6 (format AA) (2)
R6（AA型）電池（2）
Optical digital cable for a TV (1)
Câble optique numérique pour
téléviseur (1)
TV的數位光纖纜線（1）
Wall mounting brackets (2) and
screws (2)
Supports pour fixation murale (2)
et vis (2)
壁掛架（2）和螺絲（2）
Sound Bar
Startup Guide
HT-CT770
Sound Bar
Startup Guide (this book) (1)
Guide de démarrage (ce document) (1)
⼊⾨指南（本書）（1）
Operating Instructions (1)
Mode d’emploi (1)
使用說明書（1）
Setting up the remote control
Pull up the battery cover and insert
in the orientation shown in the
illustration two AA batteries.
Configuration de la télécommande
Relevez le couvercle des piles et
insérez deux piles de type AA, dans
le sens indiqué dans l’illustration.
設定遙控器
拿起電池外蓋，依圖示方向裝⼊兩顆
AA電池。
1 What’s in the box / Contenu de l’emballage / 包裝箱內容
Setup / Configuration / 設定
5
HT-CT770 4-488-971-51(1)
To install the Bar Speaker on a wall
Refer to the supplied Operating Instructions.
Pour installer l’enceinte-barre sur un mur
Reportez-vous au Mode d’emploi fourni.
將主動式揚聲器系統安裝到牆上
請參閱隨附的使用說明書。
2 Installation / Installation / 安裝
Setup / Configuration / 設定
6
HT-CT770 4-488-971-51(1)
3 Connection / Connexion / 連線
Setup / Setup / SetupSetup / Configuration / 設定
Connecting with TV / Connexion d’un téléviseur seul / 連接TV
Or / Ou / 或
If the TV to be connected is not equipped
with an optical audio output terminal,
connect an HDMI cable (not supplied, High
Speed type) to the HDMI input terminal
labeled “ARC.” If the HDMI input terminal
labeled “ARC” is connected with another
device, disconnect that device and connect
this Bar Speaker.
Si le téléviseur à connecter n’est pas équipé
d’une borne de sortie audio optique,
connectez un câble HDMI (non fourni, de
type High Speed) sur la borne d’entrée HDMI
étiquetée «ARC». Si la borne d’entrée HDMI
étiquetée «ARC» est connectée à un autre
périphérique, déconnectez ce périphérique et
connectez l’enceinte-barre.
如果連接的TV沒有配備光纖音訊輸出端，請將
一條HDMI纜線（未隨附，高速類型）連接標
示“ARC”的HDMI輸⼊端。如果標示“ARC”的
HDMI輸⼊端已連接另一部裝置，請斷開該裝置的
連接，改連接本主動式揚聲器系統。
7
HT-CT770 4-488-971-51(1)
When connecting with TV and other devices / Connexion d’un téléviseur et d’autres périphériques /
連接TV與其他裝置時
TV / Téléviseur / TV
Blu-ray Disc™ player, etc.
Lecteur Blu-ray Disc™, etc.
Blu-ray Disc™播放器等。
This is a connection for enjoying surround
sound more effectively.
HDMI cable (not supplied, High Speed type)
If the HDMI input terminal on the TV is not
labeled “ARC,” perform connections both
and .
HDMI cable (not supplied, High Speed type)
If it is connected to the TV, disconnect it and
connect it to the Bar Speaker.
Cette connexion permet de profiter de
manière plus efficace du son surround.
Câble HDMI (non fourni, de type High Speed)
Si la borne d’entrée HDMI sur le téléviseur
n’est pas étiquetée «ARC», effectuez les
connexion avec et .
Câble HDMI (non fourni, de type High Speed)
S’il est connecté au téléviseur, déconnectez-
le et connectez-le à l’enceinte-barre.
此連線可更有效地享受環繞聲。
HDMI纜線（未隨附，高速類型）
如果TV的HDMI輸⼊端未標示“ARC”，請連接
和 。
HDMI纜線（未隨附，高速類型）
如果已連接TV，請斷開TV的連接，改連接本主動
式揚聲器系統。
8
HT-CT770 4-488-971-51(1)
4 Turning on the system / Mise sous tension du système / 開啟系統
Setup / Configuration / 設定
Display / Affichage / 顯示幕
On/standby lamp
Témoin de marche/veille
開啟/待機指示燈
1 Connect the AC power cords (mains leads).
2 Press the
(on/standby) button.
The display lights.
3 Confirm that the on/standby lamp of the
subwoofer is lit in green. If not, the wireless
transmission is not activated. Refer to
“No sound is heard from the subwoofer.”
of “Troubleshooting” in the supplied
Operating Instructions.
4 Turn on the connected device.
1 Connectez les cordons d’alimentation.
2 Appuyez sur le bouton
(mise en
marche/veille).
L’affichage s’allume.
3 Vérifiez que le témoin de marche/veille du
caisson de graves est allumé en vert. Si ce
n’est pas le cas, la transmission sans fil n’est
pas activée. Reportez-vous au paragraphe
«Aucun son n’est audible depuis le caisson
de graves.» de la section «Dépannage» du
Mode d’emploi fourni.
4 Mettez le périphérique connecté sous tension.
1 接上交流電源線。
2 按
（開啟/待機）按鈕。
顯示幕會亮起。
3 確認主動式重低音揚聲器的開啟/待機指示燈
亮綠燈。若指示燈未亮起，代表無線傳輸未
啟動。請參閱隨附之使用說明書中，“疑難
排除”的“主動式重低音揚聲器無法發出聲
音。”。
4 開啟連接裝置。
9
HT-CT770 4-488-971-51(1)
5 Listening to the sound / Écoute de sources sonores / 聆聽聲音
Setup / Setup / SetupSetup / Setup / SetupSetup / Setup / SetupSetup / Configuration / 設定
INPUT VOL
(input / entrée /
輸⼊)
(volume / volume /
音量)
Input device selected /
Périphérique d’entrée sélectionné / 已選取的輸⼊裝置
Listening to the audio of the TV
1 Press the (input) button on the remote
control or INPUT button on the Bar Speaker
repeatedly to select “TV” input.
2 Press the (volume) button on the remote
control or VOL button on the Bar Speaker to
adjust the volume.
To listen to audio from an input device other
than the TV
Press the (input) button on the remote control
or INPUT button on the Bar Speaker repeatedly until
the desired input device is indicated on the display.
TV
HDMI 1
HDMI 2
HDMI 3
ANALOG
BT AU
Setup completed! Enjoy!
Écoute de sources audio provenant du téléviseur
1
Appuyez sur le bouton (entrée) de la télécommande
ou appuyez à plusieurs reprises sur le bouton INPUT de
l’enceinte-barre pour sélectionner l’entrée «TV».
2
Appuyez sur le bouton (volume) de la télécommande
ou appuyez à plusieurs reprises sur le bouton VOL de
l’enceinte-barre pour ajuster le volume.
Pour écouter des sources audio provenant d’un
périphérique d’entrée autre que le téléviseur
Appuyez sur le bouton (entrée) de la télécommande
ou appuyez à plusieurs reprises sur le bouton INPUT de
l’enceinte-barre jusqu’à ce que le périphérique d’entrée
souhaité soit indiqué sur l’affichage.
TV
HDMI 1
HDMI 2
HDMI 3
ANALOG
BT AU
Configuration terminée! Bonne écoute!
聆聽TV的音訊
1
重複按下遙控器上的（輸⼊）按鈕或主動式揚
聲器系統上的INPUT按鈕，以選擇“TV”輸⼊。
2 按遙控器上的（音量）按鈕或主動式揚聲器
系統上的VOL按鈕，可調整音量。
從輸⼊裝置（TV除外）聆聽音訊
按下遙控器上的（輸⼊）按鈕或主動式揚聲器
系統上的INPUT按鈕，直到顯示幕出現所要的輸
⼊裝置。
TV
HDMI 1
HDMI 2
HDMI 3
ANALOG
BT AU
設定完成！盡情享受！
10
HT-CT770 4-488-971-51(1)
Basic Operations / Opérations de base / 基本操作
SOUND FIELD
VOICE
NIGHT
Enjoying the sound effects
To set a sound effect, press one of the sound effect buttons on the
remote control to select the desired mode while checking the display.
SOUND FIELD:
Effects to suit to the
input sound.
CLEARAUDIO+
The suitable sound setting is automatically
selected for the sound source.
STANDARD Corresponds to every source.
MOVIE
Dialogue is clear, and sound is powerful and
realistic.
SPORTS
Commentary is clear, cheers are heard as
surround-sound, and sounds are realistic.
GAME
Sounds are powerful and realistic, suitable
for game play.
MUSIC
Sounds are played back to suit to a music
program, music Blu-ray Discs, or DVDs.
P.AUDIO
(Portable
audio)
Sounds are played back to suit to a portable
music player using DSEE*.
VOICE:
Helps make
dialogues clearer.
TYPE1 Standard
TYPE2 Dialogue range is stressed.
TYPE3
Dialogue range is stressed, and the parts of
range difficult to be discerned by the elderly
are boosted.
NIGHT:
Sound is output at
low volume with
minimum loss of
fidelity and clarity of
dialogue.
ON Activates the Night mode function.
OFF Inactivates the Night mode function.
* DSEE stands for Digital Sound Enhancement Engine, a high range compensation and fine
sound restoration technology developed independently by Sony.
Page is loading ...
12
HT-CT770 4-488-971-51(1)
Basic Operations / Opérations de base / 基本操作
PAIRING
INPUT
Lamp (blue) / Témoin (bleu) / 指示燈（藍色）
To pair the system with the device (Pairing)
1 Press the PAIRING button.
The lamp
flashes quickly during BLUETOOTH pairing.
2 Set your BLUETOOTH device to pairing mode and select
“SONY:HT-CT770.”
If a Passkey is requested, enter “0000.”
3 Make sure that the lamp lights up. (Connection has been
established.)
Hint
Once the BLUETOOTH connection is established, an indication recommending
which application to download will be displayed, according to what equipment
you have connected.
Following the instructions displayed, an application called “SongPal,” which will
enable you to operate this system, can be downloaded.
Refer to “Controlling the system using a smartphone or tablet device (SongPal)” in
the supplied Operating Instructions for details on “SongPal.”
To listen to the sound of the registered device
1 Press the INPUT button repeatedly to display “BT AU.”
The lamp
flashes during attempting BLUETOOTH pairing.
2 On the BLUETOOTH device, select “SONY:HT-CT770.”
3 Make sure that the lamp lights up. (Connection has been
established.)
4 Start the audio playback with the music software in the connected
BLUETOOTH device.
Listening to the sound from BLUETOOTH devices / Écoute de sources sonores provenant de
périphériques BLUETOOTH / 從BLUETOOTH裝置聆聽聲音
When registering BLUETOOTH devices / Enregistrement de périphériques BLUETOOTH / 登錄BLUETOOTH裝置時
Page is loading ...
14
HT-CT770 4-488-971-51(1)
Basic Operations / Opérations de base / 基本操作
When using one-touch connection (NFC) / Utilisation d’une connexion par simple contact (NFC) /
使用觸控連接功能時（NFC）
1 Download, install, and start the “NFC Easy Connect” app on your
smartphone.
2 Touch the N mark of the Bar Speaker with the smartphone.
3 Make sure that the lamp (blue) lights up. (Connection has been
established.)
•Compatibledevices
Smartphones, tablets, and music players with the NFC function built-in
(OS: Android™ 2.3.3 or later, excluding Android 3.x)
1 Téléchargez, installez et lancez l’application «Connexion NFC facile»
sur votre smartphone.
2 Touchez la marque N de l’enceinte-barre avec le smartphone.
3 Assurez-vous que le témoin (bleu) s’éclaire. (Le connexion a été
établie.)
•Périphériquescompatibles
Smartphones, tablettes et lecteurs de musique disposant de la fonction NFC
intégrée (SE: Android™2.3.3 ou supérieur, à l’exception d’Android3.x)
Lamp (blue) / Témoin (bleu) / 指示燈（藍色）
Page is loading ...
HT-CT770 4-488-971-51(1)
© 2014 Sony Corporation Printed in China 4-488-971-51(1)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Sony HT-CT770 Quick start guide
- Category
- Bluetooth music receivers
- Type
- Quick start guide
The Sony HT-CT770 is a versatile home audio system that elevates your entertainment experience with its powerful sound and connectivity options. This soundbar boasts a sleek design that complements any living space, delivering immersive audio for movies, music, and gaming. With an array of sound modes, including Standard, Movie, Sports, Game, and Music, you can optimize the acoustics to suit your content. Additionally, the Night mode ensures clear dialogue even at low volumes, making it ideal for late-night viewing.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Sony HT-CT770 Guide de démarrage rapide
Related papers
-
Sony HT-CT770 Quick start guide
-
Sony HT-CT370 Quick start guide
-
-
Sony HT-ST5 Quick start guide
-
-
-
-
-
-
Sony HT-NT5 Operating Instructions Manual