Amprobe TH-1 User manual

TH-1

Relative Humidity /

Temperature Probe

Style Meter

Users Manual

•Moded’emploi

•Bedienungshandbuch

•Manualed’Uso

•Manualdeuso

•Användarhandbok

English

TH-1

RelativeHumidity/Temperature

ProbeStyleMeter

UsersManual

TH1_Rev002

©2012AmprobeTestTools.

Allrightsreserved.

2

Limited Warranty and Limitation of Liability

YourAmprobeproductwillbefreefromdefectsinmaterialand

workmanshipfor1yearfromthedateofpurchaseunlesslocallaws

requireotherwise.Thiswarrantydoesnotcoverfuses,disposable

batteriesordamagefromaccident,neglect,misuse,alteration,

contamination,orabnormalconditionsofoperationorhandling.

Resellersarenotauthorizedtoextendanyotherwarrantyon

Amprobe’sbehalf.Toobtainserviceduringthewarrantyperiod,

returntheproductwithproofofpurchasetoanauthorizedAmprobe

TestToolsServiceCenterortoanAmprobedealerordistributor.See

RepairSectionfordetails.THISWARRANTYISYOURONLYREMEDY.

ALLOTHERWARRANTIES-WHETHEREXPRESS,IMPLIEDORSTAUTORY

-INCLUDINGIMPLIEDWARRANTIESOFFITNESSFORAPARTICULAR

PURPOSEORMERCHANTABILITY,AREHEREBYDISCLAIMED.

MANUFACTURERSHALLNOTBELIABLEFORANYSPECIAL,INDIRECT,

INCIDENTALORCONSEQUENTIALDAMAGESORLOSSES,ARISING

FROMANYCAUSEORTHEORY.Sincesomestatesorcountriesdo

notallowtheexclusionorlimitationofanimpliedwarrantyorof

incidentalorconsequentialdamages,thislimitationofliabilitymaynot

applytoyou.

Repair

Alltesttoolsreturnedforwarrantyornon-warrantyrepairorfor

calibrationshouldbeaccompaniedbythefollowing:yourname,

company’sname,address,telephonenumber,andproofofpurchase.

Additionally,pleaseincludeabriefdescriptionoftheproblemorthe

servicerequestedandincludethetestleadswiththemeter.Non-

warrantyrepairorreplacementchargesshouldberemittedinthe

formofacheck,amoneyorder,creditcardwithexpirationdate,ora

purchaseordermadepayabletoAmprobe®TestTools.

In-Warranty Repairs and Replacement – All Countries

Pleasereadthewarrantystatementandcheckyourbatterybefore

requestingrepair.Duringthewarrantyperiodanydefectivetest

toolcanbereturnedtoyourAmprobe®TestToolsdistributorforan

exchangeforthesameorlikeproduct.Pleasecheckthe“Whereto

Buy”sectiononwww.amprobe.comforalistofdistributorsnearyou.

Additionally,intheUnitedStatesandCanadaIn-Warrantyrepairand

replacementunitscanalsobesenttoaAmprobe®TestToolsService

Center(seeaddressnextpage).

Non-Warranty Repairs and Replacement – US and Canada

Non-warrantyrepairsintheUnitedStatesandCanadashouldbesent

toaAmprobe®TestToolsServiceCenter.CallAmprobe®TestToolsor

inquireatyourpointofpurchaseforcurrentrepairandreplacement

rates.

InUSA InCanada

AmprobeTestTools AmprobeTestTools

Everett,WA98203 Mississauga,ONL4Z1X9

Tel:877-AMPROBE(267-7623) Tel:905-890-7600

Non-Warranty Repairs and Replacement – Europe

Europeannon-warrantyunitscanbereplacedbyyourAmprobe®Test

Toolsdistributorforanominalvcharge.Pleasecheckthe“Whereto

Buy”sectiononwww.amprobe.comforalistofdistributorsnearyou.

EuropeanCorrespondenceAddress*

Amprobe®TestToolsEurope

Beha-AmprobeGmbH

IndenEngematten14

79286Glottertal,Germany

Tel.:+49(0)76848009-0

www.amprobe.eu

*(Correspondenceonly–norepairorreplacementavailablefromthis

address.Europeancustomerspleasecontactyourdistributor.)

3



➊

LCDDualDisplay



➋

Probewithprotectiveturnablecap



➌

ON/OFF



➍

DataHOLD



➎

MIN/MAX



➏

RESET



➐

MODE



➑

°C/°FPushbutton

4

TH-1

Relative Humidity / Temperature Probe

Style Meter

CONTENTS

Symbols...................................................................................................... 5

Introduction............................................................................................... 5

UnpackandInspection........................................................................ 5

Operation.................................................................................................. 5

AutoPowerOff.................................................................................... 5

BatteryReplacement................................................................................. 6

Troubleshooting........................................................................................ 6

Specications............................................................................................. 6

5

SYMBOLS



Refertothemanual



ComplieswithEU

directives



Conformstorelevant

Australianstandards.



Donotdispose

ofthisproductas

unsortedmunicipal

waste.

 Warning and Precautions

Do not put the probe in contact with liquids. That may cause

permanent damage.

INTRODUCTION

CongratulationsonyourpurchaseoftheTH-1temperatureprobestyle

meter.Thismeterisequippedwithaprotectiveturnablesensorcap,a

patenteddesign,toprotectthesensorwhennotinuse.

Aconvenientinstrumenttomeasuretemperaturefrom-20°Cto60°C

(4°to140°F),RelativeHumidityupto99%RH,andthedewpoint(DP)

orwetbulb(WB)fortemperatureandhumidity.

Unpack and Inspection

1xTH-1TemperatureProbestylemeter

1xBatteryCR2032

1xManual

OPERATION

1. Beforeyoustartanymeasurement,pleaserotatethecapclockwise

orcounterclockwisetoexposethesensor.

2. PressON/OFFyellowpushbuttontoturnpowerONorOFF.Youwill

seeafulldisplayonthescreenforonesecond.(SeeFig.1)Themeter

willstartmeasuringthetemperatureandhumidityanddisplayboth

readingsatthesametime.(SeeFig.2)

3. PressHOLDuntil“HLD”appearsonthescreentofreezethereading

onthedisplay.PressHOLDagaintocanceltheHOLDfunctionand

continuewiththemeasurement.(SeeFIG.3)

4. PressMIN/MAXtodisplaytheminimumreadingoftheactual

measurement(Temp&RH).PressMIN/MAXagaintodisplaythe

maximumreading.PressMIN/MAXagaintoreturntherealtime

measurement.(SeeFig.4)

5. Press°C/°FpushbuttontoswitchbetweendegreesCelsiusto

degreesFahrenheit.

6. PressMODEtotogglebetween“AIR”,“DP”,and“WB”readings.

7. PressandholdRESETtoclearcurrentMINandMAXreadingsfrom

memory

Auto Power Off

Themeterwillturnitselfoffafter20-min.TooverrideAutoPowerOff

function,pressON/OFF&HOLDkeyssimultaneously.Thedisplaywill

show”n”.When”n”appears,releasetheON/OFFbutton.Themeter

willnowbeinNon-sleepmodeforlongtimeoperationpurposes.(See

Fig.5)

6

BATTERY REPLACEMENT

1. Turnoffthemeter.Useacointoopenthebatterycover.

2. Putthebattery(CR2032)withthe”+”facesup.

3. Replacethecover.

TROUBLESHOOTING

POWERONBUTNODISPLAY

• Makesureyoupressthe”ON/OFF”keyformorethan100mS.

• Checkthebatteryconditionsandreplaceifnecessary

DISPLAYDISAPPEARS

• Checkforlowbatteryindicatorbeforethedisplayisoff.Ifthelow

batteryindicatorappears,replacethebattery.

• Turnonthemeterbypressing“ON/OFF+HOLD”keystodisable

AutoPowerOff.

E02-Outofthelowestlimit.

E03-Outofthehighestlimit.

E04-Checkerrormessageoftheoriginaldata.

E11-Calibrationrequired.Thehumiditysensoraccuracycannotbe

calibratedbytheuserduetospecialproceduresrequired.Please

contactaqualiedcalibrationhouseforservice.

E33-Returnthemeterforrepair

SPECIFICATIONS

Size:17.5×4.2×1.6cm(6.89x1.65x0.63in)

Battery:150Hours

Powerconsumption:<2.0mA

Sensor:ElectronicCapacitancePolymerFilmSensor

Range:

RelativeHumidity:0to100%

Temperature:-20to50°C(-4to122°F)

DP/WB:-20to59.9°C/-5to59.9°C(-4to139.8°F/23to139.8°F)

Accuracy:

RelativeHumidity:±4%from10to95%RHand±5%forotherRH

range@25°C/77°F

TemperatureCoefcient:0.1x(speciedaccuracy)/°C(<25°Cor>

25°C)

Temperature:±0.6°C/±1°F

Resolution:0.1%,0.1°C/0.1°F

Themeterconformstothefollowingstandards:

EN50081-1/1992:EN55022

EN50082-1/1997:EN55024

(EN61000-4-2/-3/-8,ENV50204)

Page is loading ...

38

FIG-4

Press MIN/MAX

Again

Press MIN/MAX

Again

Figure4

Figure5

FIG-5

PleaseRecycle

Visit www.Amprobe.com for

•Catalog

•Applicationnotes

•Productspecications

•Usermanuals

Amprobe TH-1 User manual

Amprobe TH-1 User manual

in other languages

Related papers

Other documents