Panasonic DMPBDT100EG Owner's manual

Category
DVD players
Type
Owner's manual
VQT2U34
NEDERLANDS DEUTSCHITALIANOESPAÑOLSVENSKADANSK FRANÇAIS ENGLISH
Operating Instructions
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
Instrucciones de funcionamiento
Gebruiksaanwijzing
Bruksanvisning
Kortfattet betjeningsvejledning
Blu-ray Disc Player
Blu-ray Disc-Player
Lecteur de Blu-ray Disc
Lettore Blu-ray Disc
Reproductor de Blu-ray Disc
Blu-ray Disc speler
Blu-ray-skiva spelare
Blu-ray-diskafspiller
Model No. DMP-BDT100
Denne manual angiver enkle anvisninger til de mest grundlæggende handlinger. For yderligere oplysninger henvises der til
den engelske tekst.
Model number suffix “EG” denotes UK, Continental Europe and Republic of Ireland model.
Region management information (> 7)
Regionsverwaltungsinformation (> 51)
Information de gestion de région (> 93)
Informazioni sulla gestione delle regioni (> 135)
Información sobre la gestión de regiones (> 177)
Informatie regiobeheer (> 219)
Information om regionhantering (> 261)
Regionsstyringsinformation (> 301)
BD-Video: “B” DVD-Video: “2”
“ALL”
2 ALL
3
5
2
until
2010/9/3
EG
DMP-BDT100EG-VQT2U34.book 1 ページ 2010年6月22日 火曜日 午前11時0分
2
VQT2U34
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
Before connecting, operating or adjusting this product,
please read the instructions completely.
Please keep this manual for future reference.
Features
3D video playback (> 20)
You can enjoy powerful videos with realistic sensations of
the 3D compatible video software by connecting this unit
with an HDMI cable to a 3D compatible TV.
Wireless connection (> 11, 12)
This unit supports Wi-Fi technology and it is possible to
make a wireless connection by using Wireless LAN Adaptor.
DLNA (> 23)
You can enjoy viewing video and pictures saved on a DLNA
Certified media server connected to the home network with
this unit.
DivX Plus HD (> 19)
Enjoy high definition picture and high quality sound of DivX
Plus HD video.
SDXC Card (> 6)
This unit supports SDXC Card. SDXC is the latest standard
of SD Card and a higher storage capacity card.
VIERA CAST (> 22)
Internet services (such as YouTube, Picasa Web Albums,
etc.) can be accessed easily by using the VIERA CAST
button.
Caution for AC Mains Lead
(For the United Kingdom and Republic of Ireland)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body
of the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
If a new plug is to be fitted please observe the wiring code
as stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or
Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E, BY THE EARTH SYMBOL Ó OR COLOURED
GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
(2)
DMP-BDT100EG-VQT2U34.book 2 ページ 2010年6月22日 火曜日 午前11時0分
3
VQT2U34
ENGLISH
Table of contents
Getting started
Features. . . . . . . . . . . . . . . . . . . . . . . . . .2
Caution for AC Mains Lead . . . . . . . . . . .2
Accessory. . . . . . . . . . . . . . . . . . . . . . . . .4
Unit and media care. . . . . . . . . . . . . . . . .4
Control reference guide . . . . . . . . . . . . . .5
Playable discs/Cards/USB devices . . . . .6
Connections and settings
STEP 1 : Connecting to a TV. . . . . . . . . .8
STEP 2 : Connecting to
an amplifier/receiver . . . . . . . .10
STEP 3 :
Connecting to
a broadband network
. . . . . . . . .11
STEP 4 : Connecting
AC mains lead. . . . . . . . . . . . .12
STEP 5 : Setting. . . . . . . . . . . . . . . . . . .12
STEP 6 : Reprogramming
the remote control. . . . . . . . . .15
Playback
Inserting or removing media. . . . . . . . . .15
FUNCTION menu. . . . . . . . . . . . . . . . . .16
Playing video contents . . . . . . . . . . . . . .16
Enjoying Blu-ray 3D™ video . . . . . . . . .20
Playing still pictures . . . . . . . . . . . . . . . .21
Playing music. . . . . . . . . . . . . . . . . . . . .22
Enjoying VIERA CAST. . . . . . . . . . . . . .22
DLNA feature . . . . . . . . . . . . . . . . . . . . .23
Linked operations with the TV
(VIERA Link “HDAVI Control™”) . . . . . .25
Settings
Playback menu . . . . . . . . . . . . . . . . . . . 26
Setup menu. . . . . . . . . . . . . . . . . . . . . . 28
Reference
Troubleshooting guide . . . . . . . . . . . . . 32
Messages . . . . . . . . . . . . . . . . . . . . . . . 35
Audio Information . . . . . . . . . . . . . . . . . 36
About MP3/JPEG/DivX/
AVCHD/MPEG2 files . . . . . . . . . . . . . . 38
Specifications . . . . . . . . . . . . . . . . . . . . 40
Safety precautions . . . . . . . . . . . . . . . . 41
Supplemental information. . . . . . . . . . . 42
Glossary . . . . . . . . . . . . . . . . . . . . . . . . 43
Index. . . . . . . . . . . . . . . . . . . . . . . . . . 312
About descriptions in these operating
instructions
Instructions for operations are generally described
using the remote control.
Firmware updating (> 14)
(3)
DMP-BDT100EG-VQT2U34.book 3 ページ 2010年6月22日 火曜日 午前11時0分
4
VQT2U34
Getting started
Accessory
Check the supplied accessories before using this unit.
Product numbers correct as of June 2010. These may be subject to
change.
Do not use AC mains lead with other equipment.
Insert so the poles (
i
and
j
) match those in the remote
control.
Point it at remote control signal sensor on this unit. (> 5)
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
Do not mix old and new batteries or different types at the same time.
Do not heat or expose to flame.
Do not leave the battery(ies) in an automobile exposed to direct sunlight
for a long period of time with doors and windows closed.
Do not take apart or short circuit.
Do not attempt to recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
Unit and media care
Clean this unit with a soft, dry cloth
Never use alcohol, paint thinner or benzine to clean this
unit.
Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Clean the lens with the lens cleaner
Clean discs
Wipe with a damp cloth and then wipe dry.
Disc and card handling precautions
Handle discs by the edges to avoid inadvertent scratches
or fingerprints on the disc.
Do not attach labels or stickers to discs.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
Do not use the following discs:
Discs with exposed adhesive from removed stickers or
labels (rented discs etc).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart shapes.
To dispose or transfer this unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then
follow the procedure to return all the settings to the factory
presets to delete the user settings. (> 32, “To return all
settings to the factory preset.”)
The operation history may be recorded in the memory of
this unit.
1 Remote control
(N2QAKB000077)
2 Batteries for remote control
2 AC mains lead
For the United Kingdom and Republic of Ireland:
K2CZ3YY00005 (3-pin moulded plug)
For Continental Europe:
RJA0043-1C (2-pin moulded plug)
Using the remote control
R6/LR6, AA
(Alkaline or manganese batteries)
Lens cleaner: RP-CL720E
This lens cleaner may not be available for sale in all
countries, e.g. not available in Germany, please consult
your Panasonic dealer for advice.
This lens cleaner is primarily for use on Panasonic DVD
recorders (DIGA), but it is also suitable for use on this
unit.
DO
DO NOT
(4)
DMP-BDT100EG-VQT2U34.book 4 ページ 2010年6月22日 火曜日 午前11時0分
5
VQT2U34
ENGLISH
Control reference guide
1 Turn the unit on and off (> 12)
2 TV operation buttons (> 15)
You can operate the TV through the unit’s remote control.
[Í TV] : Turn the television on and off
[AV] : Switch the input select
[ijVOL] : Adjust the volume
[WXCH] : Channel select
3 Select title numbers, etc./Enter numbers or characters
(> 22)
[CANCEL] : Cancel
4 Show playback menu (> 26)
5 Switch on/off Secondary Video (Picture-in-picture)
(> 18)
6 Basic playback control buttons (> 16, 17)
7 Show status messages (> 16)
8 Show Pop-up menu (> 16)
9 Show Top menu/DIRECT NAVIGATOR (> 16)
10 Show OPTION menu (> 17)
11 Coloured buttons (red, green, yellow, blue)
These buttons are used when;
Operating a BD-Video disc that includes Java
TM
applications (BD-J).
Displaying “Title View” and “Album View” screens.
(> 21)
Operating contents of VIERA CAST. (> 22)
12 Transmit the remote control signal
13 Open or close the disc tray (> 15)
CAUTION
Do not place objects in front of the unit. The disc tray may
collide with objects when it is opened, and this may cause
malfunction.
14 Adjust the volume of an amplifier/receiver. (> 15)
15 Select audio (> 17)
16 Reproduce more natural audio (> 27)
17 Select drive (BD/DVD/CD, SD card or USB device)
(> 15)
18 Displays the Home screen of the VIERA CAST (> 22)
19 Exit the menu screen
20 Show FUNCTION menu (> 16)
21 Selection/OK, Frame-by-frame (> 17)
22 Return to previous screen
1
2
3
4
5
6
7
9
8
11
10
19
18
22
21
20
15
16
17
14
13
12
1
2
5
8
7
9
4
6
3
(5)
DMP-BDT100EG-VQT2U34.book 5 ページ 2010年6月22日 火曜日 午前11時0分
6
VQT2U34
Playable discs/Cards/USB devices
* See page 7, 38–39 for more information on the types of content that can be played.
Type
Logo
examples
Type detail Playable contents*
BD-Video Video
BD-RE
Video
JPEG
BD-R
Video
DivX
®
DVD-Video Video
DVD-RAM
Video
AVCHD
JPEG
DVD-R
Video
AVCHD
DivX
®
MP3
JPEG
DVD-R DL
DVD-RW
Video
AVCHD
+R/+RW/+R DL
Music CD Music [CD-DA]
CD-R
CD-RW
DivX
®
Music [CD-DA]
MP3
JPEG
SD Memory Card (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
(Compatible with both mini and micro types)
MPEG2
AVCHD
JPEG
USB device
(up to 128 GB)
DivX
®
MP3
JPEG
BD
DVD
CD
SD
USB
(6)
DMP-BDT100EG-VQT2U34.book 6 ページ 2010年6月22日 火曜日 午前11時0分
7
VQT2U34
ENGLISH
Discs that cannot be played in this
unit
Any other disc that is not specifically supported or
previously described.
2.6 GB and 5.2 GB DVD-RAM
DVD-RAM that cannot be removed from their cartridges
Super Audio CD
Photo CD
DVD-Audio
Video CD and Super Video CD
WMA discs
HD DVD
Region management information
BD-Video
This unit plays BD-Video marked with labels containing the
region code “B”.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “2” or “ALL”.
Example:
Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded
by a recorder, etc. needs to be finalized by the recorder to
play on this unit. Please refer to the recorder’s instructions.
BD-Video
3D videos can be played back when this unit is connected
to a 3D compatible TV using a High Speed HDMI Cable.
This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) adopted in BD-Video. In order to
enjoy these audio formats, refer to page 36.
Music CD
Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
SD card
MiniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used,
but must be used with an adaptor card.
These are usually supplied with such cards,
or otherwise customer provided.
Keep the Memory Card out of reach of
children to prevent swallowing.
To protect the card’s contents, move the
record prevention tab (on the SD card) to
“LOCK”.
This unit is compatible with SD Memory Cards that meet
SD Card Specifications FAT12 and FAT16 formats, as well
as SDHC Memory Cards in FAT32 format (Does not
support long file name.) and SDXC Memory Cards in
exFAT.
If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
Useable memory may be slightly less than the card
capacity.
USB device
This unit does not guarantee connection with all USB
devices.
This unit does not support USB device charging.
FAT12, FAT16 and FAT32 file systems are supported.
This unit supports USB 2.0 High Speed.
BD-RE, BD-R
Discs recorded in DR mode using Panasonic Blu-ray Disc
recorders may not playback the audio etc., correctly.
It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the
files were created.
The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions.
Read the disc’s instructions carefully.
2 ALL
3
5
2
(7)
DMP-BDT100EG-VQT2U34.book 7 ページ 2010年6月22日 火曜日 午前11時0分
8
VQT2U34
STEP 1 : Connecting to a TV
Do not place the unit on amplifiers/receiver or equipment
that may become hot. The heat can damage the unit.
Before making any connections we suggest you
temporarily disconnect all the units from AC power.
Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
Refer to page 37, about recommended settings for each
piece of connected equipment.
Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
\For\the\United\Kingdom\and\Republic\of\Ireland\only\
BE SURE TO READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 BEFORE CONNECTION.
Via an HDMI AV OUT terminal
It is possible to playback 3D videos by connecting
this unit with a 3D compatible TV.
Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(> 30).
The HDMI connection supports VIERA Link “HDAVI
Control” (> 25).
Highest Quality
(VIDEO)
HDMI IN
HDMI cable
(8)
DMP-BDT100EG-VQT2U34.book 8 ページ 2010年6月22日 火曜日 午前11時0分
9
VQT2U34
ENGLISH
Via a COMPONENT VIDEO OUT terminal Via a VIDEO OUT terminal
Connect terminals of the same colour.
Set “Component Resolution” to “576p/480p”, “720p” or
“1080i”. (> 30)
Set “HDMI Video Mode” to “Off” (> 30).
Connect terminals of the same colour.
Standard Quality
(VIDEO)
COMPONENT VIDEO IN
AUDIO IN
R L
Component
Video cable
Audio/Video
cable
AUDIO IN
R L
VIDEO IN
Audio/Video cable
(9)
DMP-BDT100EG-VQT2U34.book 9 ページ 2010年6月22日 火曜日 午前11時0分
10
VQT2U34
STEP 2 : Connecting to an amplifier/receiver
Digital Audio
Via an HDMI AV OUT terminal
It is possible to playback 3D videos when the
connected TV and amplifier/receiver are 3D
compatible.
Via an OPTICAL terminal
Set “HDMI Video Mode” and “HDMI Audio Output” to
“On” (> 30).
Set “Digital Audio Output” depending on the connected
amplifier/receiver (> 29).
The HDMI connection supports VIERA Link “HDAVI
Control” (> 25).
When connecting to an amplifier/receiver that is not
3D-compatible, you can enjoy 3D videos by connecting
this unit to the TV via an HDMI terminal (> 8), and to the
amplifier/receiver via the OPTICAL terminal.
When connecting a TV (> 8) with HDMI AV OUT
terminal, set “HDMI Audio Output” to “Off” (> 30).
Set “Digital Audio Output” depending on the used
terminal and connected amplifier/receiver (> 29).
HDMI IN
HDMI IN
HDMI IN
Multi channel
speakers
Amplifier/receiver
HDMI cable
HDMI cable
OPTICAL IN
Amplifier/receiver
Optical cable
(10)
DMP-BDT100EG-VQT2U34.book 10 ページ 2010年6月22日 火曜日 午前11時0分
11
VQT2U34
ENGLISH
STEP 3 :
Connecting to a broadband network
The following services can be used when this unit is
connected to broadband.
For details about connection method, refer to the
instructions supplied with the connected equipment.
Firmware can be updated (> 14)
You can enjoy the BD-Live (> 18)
You can enjoy the VIERA CAST (> 22)
DLNA feature (> 23)
Using LAN (ethernet) cable Using Wireless LAN Adaptor DY-WL10
(optional)
Use shielded LAN cables when connecting to peripheral
devices.
Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
Only the Wireless LAN Adaptor DY-WL10 (optional) can
be used.
Read the operating instructions for the Wireless LAN
Adaptor DY-WL10 (optional) thoroughly when using it.
For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
The unit is not compatible with public wireless LAN
services (Hotspot etc.) provided in airports, stations,
cafes etc.
Broadband router, etc.
Internet
LAN Cable
(Straight)
Wireless router
(Access point), etc.
Wireless LAN Adaptor
Internet
Front of the unit
Pull to flip down
the front panel.
(11)
DMP-BDT100EG-VQT2U34.book 11 ページ 2010年6月22日 火曜日 午前11時0分
12
VQT2U34
STEP 4 : Connecting
AC mains lead
This unit consumes a small amount of AC power (“Quick
Start”: “Off”, approx. 0.2 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
STEP 5 : Setting
After connecting your new player for the first time and
pressing [Í], a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1 Press [Í].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then the setting information on the TV is acquired by this
TV.
2
Follow the on-screen instructions and make
the settings with [
3
,
4
] and press [OK].
“On-Screen Language”, “TV Aspect” and “Quick Start”
are set. (> 29 – 31)
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. (> 31)
You can also change these settings individually. (> 29 – 31)
After completing “Easy Setting”, you can continue with
“Network Easy Setting”.
Select “Wired” or “Wireless” and press [OK].
“Wired” connection
Follow the on-screen instructions to make your connection settings.
When you experience problems (> 13)
“Wireless” connection
If you select “Wireless” and “Wireless LAN Adaptor is not
connected.” is displayed, check that the Wireless LAN
Adaptor is fully inserted. Alternatively, disconnect and
reconnect it. If there is still no change in the display, consult
your dealer for advice.
Select “WPS (PUSH button)” or “Search for
access point” and then follow the on-screen
instructions and make the settings.
WPS (PUSH button):
If your Wireless router (Access point)
supports WPS (PUSH button), you can
easily perform the settings by pressing
WPS button on it.
WPS (Wi-Fi Protected Setup) is a standard
that facilitates settings relating to the
connection and security of wireless LAN
devices.
1 Press WPS button or corresponding button of Wireless
router (Access point) until the lamp starts flashing.
For details, refer to the operating instruction of
Wireless router (Access point).
2 Press [OK].
Easy Setting
AC mains lead
(supplied)
To a household mains socket
(AC 220 to 240 V, 50 Hz)
Network Easy Setting
OK
RETURN
Network Easy Setting (Connection Test)
Wired
Wireless
Select a connection mode.
Current setting : Wired
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select “Wireless”.
Access Point Connection Setting
Select a connection method for access to
Wireless LAN.
Please refer to the operating instructions of
the access point about connection methods.
WPS (PUSH button)
Search for access point
*
1
e.g.
(12)
DMP-BDT100EG-VQT2U34.book 12 ページ 2010年6月22日 火曜日 午前11時0分
13
VQT2U34
ENGLISH
Search for access point:
Available Wireless routers (Access points) are searched and
listed. You can select the one to use from the list.
1 Press [3, 4] to select SSID*
2
of Wireless router
(Access point) you want to connect with. Then press
[OPTION] to show information of the selected router,
make a note of the authentication and encryption type.
If you can not find the SSID*
2
, select “Search again”.
2 Press [RETURN] and then press [OK].
Then select an item on the following screen which
corresponds to the authentication type noted down in
step 1 above.
Follow the on-screen instructions to make the settings.
Input your encryption key code in “Encryption Key”
supplied with your Wireless router (Access point).
*1
Wi-Fi Protected Setup-compatible Wireless router (Access point) may
have the mark.
*2
An SSID (Service Set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID
matches for both devices.
Access Point Connection Setting
Network Easy Setting (Connection Test)
When you experience
problems with settings
OK
Access Point Connection Setting
Reception
Select an access point to connect with.
To search for access point again, please
select "Search again" below.
SSID
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
Search again
SSID
Wireless type
Authentication type
Encryption type
:XXXXXXXXXXXXXXX
:802.11n/g/b (2.4GHz)
:WPA-PSK
:AES
Access Point Connection Setting
WPA2-PSK (AES/TKIP)
WPA-PSK (AES/TKIP)
Open/Shared Key (WEP)
Open system
Select authentication type.
OK
Access Point Connection Setting
Yes No
Failed to connect to the access point.
A conflict with other devices occurred.
Do you wish to setup Access Point
Connection Setting again ?
Display Check the following
A conflict with other
devices occurred.
Please wait a few moments,
and then try again.
A time out error
occurred.
Setting of the Wireless router
(Access point) for MAC Address
etc.
The signal may be weak. Using
the USB extension cable
supplied with the Wireless LAN
Adaptor, adjust the position of
the Wireless LAN Adaptor.
The SSID and the encryption
key of the Wireless router
(Access point).
Please wait a few moments,
and then try again.
An authentication error
or a time out error
occurred.
A device error
occurred.
Connection of Wireless LAN
Adaptor
If there is no improvement in
symptom, consult your dealer.
Display
Check the
following
1. LAN cable connection or
Connection to access point
:Fail
Connection
of the LAN
cables
(> 11)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or
Connection to access point
:Pass
Connection
and settings
of the hub
and router
Settings of
“IP Address /
DNS
Settings”
(> 31)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Home
network
available
3. Connection to gateway :Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting :Pass
3. Connection to gateway :Fail
OK
Network Easy Setting (Connection Test)
Yes No
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again.
Select “No” and press [OK] to finish Network
Easy Setting.
: Fail
: Fail
: Fail
(13)
DMP-BDT100EG-VQT2U34.book 13 ページ 2010年6月22日 火曜日 午前11時0分
14
VQT2U34
Network Easy Setting (Internet Connection Test)
Refer to the operating instructions of the hub or router.
You can perform this setup anytime by selecting “Network Easy Setting”
in the Setup menu. (> 31)
You can redo these settings individually using “Network Settings”.
(> 31)
Do not use this device to connect to any wireless network for which you
do not have usage rights.
During automatic searches in a wireless network environment, wireless
networks (SSID) for which you do not have usage rights may be
displayed; however, using these networks may be regarded as illegal
access.
After performing network settings on this unit, the settings (encryption
level, etc.) of the Wireless router (Access point) might change.
When you have trouble getting online on your PC, perform the network
settings on your PC in accordance with the settings of Wireless router
(Access point).
Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by
a third party, or the leaking of data such as personal or secret
information.
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature
operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following
screen is displayed.
To update the firmware
Press [FUNCTION MENU] > select “To Others” > [OK]
> select “Setup” > [OK] > select “General” > [OK] >
select “Firmware Update” > [OK] > select “Update
Now”
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on
the unit’s display. Unit will restart and the following screen
will be displayed.
Display Check the following
Cannot find the
server.
(B019)
“Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (> 31)
Failed to connect to
the server.
(B020)
The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
Settings of “Proxy Server
Settings” (> 31) and the router
OK
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet : Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the countermeasure for it.
Press [OK].
Firmware updating
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 31, “System
Information”)
Downloading will require several minutes. It may take longer or may
not work properly depending on the connection environment.
If you do not want to check for the latest firmware version, set
“Automatic Update Check” to “Off”. (> 31)
The latest firmware is available.
Please update firmware in Setup.
The firmware has been updated.
Current Installed Version:
x.xx
RETURN
OK
(14)
DMP-BDT100EG-VQT2U34.book 14 ページ 2010年6月22日 火曜日 午前11時0分
15
VQT2U34
ENGLISH
STEP 6 :
Reprogramming the
remote control
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. After changing the remote control
code on this product, you will need to change the code of the
remote control. (> 31, “Remote Control”)
You can operate the TV or amplifier/receiver using the unit’s
remote control.
1 For televisions
Input the 2-digit code (> 42) with the
number buttons while pressing [Í TV].
For amplifiers/receivers
Input the 2-digit code (> 42) with the
number buttons while pressing
[RECEIVER j VOL].
e.g., 01: [0] B [1]
2 Test by turning on the television or
adjusting the volume of the amplifier/
receiver.
If your television or amplifier/receiver brand has more than one code
listed, select the one that allows correct operation.
PlaybackPlayback
Inserting or removing
media
When inserting a media item, ensure that it is facing the
right way up.
When the indicator on this units display blinks, do not turn
off the unit or remove the media. Such action may result in
loss of the media’s contents.
When removing the SD card, press on the centre of the
card and pull it straight out.
If you connect a Panasonic product with a USB
connection cable, the setup screen may be displayed on
the connected equipment. For details, refer to the
instructions for the connected equipment.
To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD
card” or “USB device”.
If media is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.
For other Panasonic products
For TV or amplifier/receiver
(15)
DMP-BDT100EG-VQT2U34.book 15 ページ 2010年6月22日 火曜日 午前11時0分
16
VQT2U34
FUNCTION menu
Major functions of this unit can be operated from the
FUNCTION menu.
Press [3, 4] to select the item and press [OK].
To exit the screen
Press [FUNCTION MENU].
Items to be displayed may vary with the media.
If FUNCTION screen is not displayed, press [FUNCTION MENU].
Playing video contents
Preparation
Turn on the television and select the appropriate video input
on the television.
1 Press [Í] to turn on the unit.
2 Insert the media.
Play starts.
If the menu is displayed, press [3, 4, 2, 1] to select the
item and press [OK].
When a message screen is displayed while playing back
3D compatible video software, play back in accordance
with the instructions.
If play does not start, press [1](PLAY).
To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up
Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
Press [3, 4, 2, 1] to select the item and press [OK].
Pop-up menu also appears by pressing [OPTION] and
selecting “Pop-up Menu”.
To show the status messages
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
display information may change or will disappear from the
screen.
Signal from PAL discs is output as PAL. Signal from NTSC discs is
output as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in
“NTSC Contents Output” for NTSC discs. (> 28)
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [] when you have finished playback to protect the unit’s motor,
your television screen and so on.
Depending on media and contents, the display may change or may not
appear.
DivX: Successive play is not possible.
When a menu is displayed at the time a 1080/60p (1920k1080/60
progressive) video recorded by a Panasonic digital high-definition video
camera is played back, select “Play Video (AVCHD)”.
It is not possible to playback AVCHD and MPEG2 video which have 
been dragged and dropped, copied and pasted to the media.
Playback Play back the contents.
Top Menu (> right)
Menu (> right)
Viewing Picture (> 21)
Viewing Video (> right)
Listening Music (> 22)
Network
Home
Network
(DLNA)
(> 23)
Internet
Content
Displays the Home screen of
the VIERA CAST (> 22)
BD/DVD/CD
Switches to each drive.SD card
USB device
To Others
Playlists
You can play playlists created
on DVD-VR.
Setup
(> 28)
Card
Management
(> 18)
OK
RETURN
Playback
Top Menu
USB device
SD card
Blu-ray Disc Player
FUNCTION MENU
BD-Video
To Others
Network
BD
DVD
CD
SD
USB
1
PLAY
BD-Video
T1 C1 0:05.14
0:20.52
e.g.BD-Video
Total time
Elapsed time in the title
Current position
T: Title, C: Chapter, PL: Playlist
(16)
DMP-BDT100EG-VQT2U34.book 16 ページ 2010年6月22日 火曜日 午前11時0分
17
VQT2U34
ENGLISH
These functions may not work depending on the media and
contents.
Press [].
The stopped position is memorized.
Resume play function
Press [1] (PLAY) to restart from this position.
The position is cleared if the tray is opened or you press
[] several times to display “STOP” on the unit’s display.
On BD-Video discs including BD-J (> 43), the resume
play function does not work.
Press [;].
Press [;] again or [1] (PLAY) to restart play.
Search
While playing, press [6] or [5].
Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [6] or [5].
BD-Video and AVCHD: Forward direction [5] only.
The speed increases up to 5 steps.
Press [1] (PLAY) to revert to normal playback speed.
While playing or paused, press [:] or [9].
Skip to the title, chapter or track you want to play.
Each press increases the number of skips.
While paused, press [2] (2;) or [1] (;1).
Press and hold to change in succession forward or
backward.
Press [1] (PLAY) to revert to normal playback speed.
BD-Video and AVCHD: Forward direction [1] (;1) only.
Press [AUDIO].
You can change the audio channel number or soundtrack
language (> 26), etc.
1 Press [OPTION].
2 Select an item, then press [OK].
Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
When “TV Aspect” (> 30) is set to “4:3 Pan & Scan” or
“4:3 Letterbox”, the “Zoom” effect in “Screen Aspect” is
disabled.
Depending on the media and contents, displayed items are different.
Other operations during play
Stop
Pause
Search/Slow-motion
Skip
Frame-by-frame
Changing audio
Useful functions
While DIRECT NAVIGATOR screen is displayed
Properties
To display the title properties (recording
date, etc.).
Chapter
View
To select the chapter.
To Picture Playing still pictures (> 21).
Folder To switch to another folder.
View Titles To select the title.
While playing
Screen
Aspect
When black bars are shown at the top and
bottom or left and right sides of the screen,
you can enlarge the image to fill the screen.
Top Menu To display Top Menu.
Pop-up
Menu
To display Pop-up Menu.
Menu To display Menu.
(17)
DMP-BDT100EG-VQT2U34.book 17 ページ 2010年6月22日 火曜日 午前11時0分
18
VQT2U34
The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
]
To turn on/off secondary video
Press [PIP].
To turn on/off secondary audio
[DISPLAY] > select “Disc” > [1] > select
“Signal Type” > [OK] > set “Soundtrack” in
“Secondary Video” to
“On” or “Off”
During search/slow-motion or frame-by-frame, only the primary video is
displayed.
When “BD-Video Secondary Audio” in “Digital Audio Output” is set to
“Off”, secondary audio will not be played (> 29).
Deleting data/Formatting SD cards
There are various functions in BD-Video that you can enjoy
by copying data to the SD card. (Local Storage) If you no
longer need data recorded on the SD card, you can delete
data with the following operation.
1 Insert an SD card.
2 Press [FUNCTION MENU].
3 Press [3, 4] to select “To Others” and press [OK].
4 Press [3, 4] to select “Card Management” and press
[OK].
5 Press [3, 4] to select “BD-Video Data Erase” or
“Format SD Card” and press [OK].
6 Press [2, 1] to select “Yes” and press [OK].
7 Press [2, 1] to select “Start” and press [OK].
To use the above functions, it is recommended that you format the card
on this unit. If the SD card you use is formatted, all data on the card will
be erased. It cannot be recovered.
“BD-Live Internet Access” may need to be changed for certain discs
(> 28).
When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
Enjoying BD-Live or
BONUSVIEW in BD-Video
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you
to enjoy more functions such as subtitles, exclusive images
and online games by connecting this unit to the Internet.
Playing picture-in-picture
Secondary video
Primary video
Enjoying BD-Live discs with
Internet
Some BD-Live content available on the Blu-ray discs may
require an Internet account to be created in order to access
the BD-Live content. Follow the screen display or instruction
manual of the disc for information on acquiring an account.
1 Connect to the network. (> 11)
2 Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage (> 43).
3 Insert the disc.
Card Management No. of Files 6
Free space 300 MB
SD CARD
Format this SD Card.
OK
RETURN
BD-Video Data Erase
Format SD Card
(18)
DMP-BDT100EG-VQT2U34.book 18 ページ 2010年6月22日 火曜日 午前11時0分
19
VQT2U34
ENGLISH
ABOUT DIVX PLUS™ HD:
DivX
®
is a digital video format created by DivX, Inc. This is
an official DivX Certified
®
device that plays DivX video,
including DivX Plus™ HD video (H.264/.MKV) up to 1080p
and premium content. Visit www.divx.com for more
information and software tools to convert your files into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified
®
device must be registered in order to
play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD
section in the device setup menu.
Go to vod.divx.com with this code to complete the
registration process and learn more about DivX VOD.
Video images of the DivX VOD contents stored on USB
device can be output only through the HDMI output
terminal.
Display the unit’s registration code.
(> 31, “DivX Registration” in “General”)
After playing DivX VOD content for the first time, the
registration code is not displayed.
If you purchase DivX VOD content using a registration
code different from this unit’s code, you will not be able to
play this content.
Cancel the unit’s registration.
(> 31, “DivX Registration” in “General”)
Press [2, 1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in
www.divx.com.
Regarding DivX VOD content that can only be played a
set number of times
Some DivX VOD contents can only be played a set number
of times. When you play this content, the number of times
already played and initially playable number of times is
displayed.
The remaining number of plays decreases each time a
programme is played. However, when playing from the
point where play was previously stopped, the remaining
number of plays does not decrease due to the resume
play function.
Displaying subtitle text
You can display subtitle text on the DivX video disc on this
unit.
This function has no relation to the subtitles specified in
DivX standard specifications and has no clear standard. The
operation might be different or it may not operate properly
depending on the way the file was made or the state of this
unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” (> 26)
DivX video files that do not display “Text” do not contain subtitle text.
If the subtitle text is not displayed correctly, try changing the language
settings. (> 28)
You may not display subtitle text depending on a file.
Regarding DivX
DivX Registration
You must register this unit to play
protected DivX videos.
The registration code is necessary to
register this unit.
Registration Code: XXXXXXXXXX
Please register at www.divx.com/vod/
10 alphanumeric
characters
(19)
DMP-BDT100EG-VQT2U34.book 19 ページ 2010年6月22日 火曜日 午前11時0分
20
VQT2U34
Enjoying Blu-ray 3D
video
You can enjoy powerful videos with realistic sensations of
the Blu-ray 3D™ compatible video software by connecting
this unit with a High Speed HDMI Cable to a 3D compatible
TV.
When playing back a disc that has recorded titles with a 2
screen structure (Side by side) etc. which can be enjoyed in
3D, it will playback in accordance with the 3D settings on the
TV, regardless of the settings mentioned to the table below.
Screen displays, such as Playback menu, will not display
correctly.
Preparation
Connect 3D compatible TV to an HDMI AV OUT terminal of
this unit using a High Speed HDMI Cable. (> 8, 10)
Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback.
(> 16)
Playback following the instructions displayed on the
screen.
Perform the following settings as necessary.
Please refrain from viewing 3D images if you do not feel well or are
experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
Depending on the connected TV, the video being played back might
switch to 2D video due to changes in resolution etc. Check the 3D
setting on the TV.
3D video might not output the way it is set in “HDMI Video Format” or
“24p Output” (> 30).
3D settings
Playback method
for 3D disc
It is also possible to play back 3D discs
in 2D (conventional video). (> 28)
3D Type
If you cannot play back in 3D, change
the settings as required by the
connected TV format. (> 30)
Change the settings for 3D on the TV
also when “Side by side” is selected.
3D Playback
Message
Hide the 3D viewing warning screen.
(> 28)
Graphic Display
Level
Adjust the pop-up position for the
playback menu or message screen etc.
(> 26)
BD
The image is an illustration.
(20)
DMP-BDT100EG-VQT2U34.book 20 ページ 2010年6月22日 火曜日 午前11時0分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320

Panasonic DMPBDT100EG Owner's manual

Category
DVD players
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI