CICLOSPORT K.W. Hochschorner GmbH, Einsteinstraße 39a, 82152 Martinsried, Germany, www.ciclosport.com
TEL: +49 (0)89 – 895 270 0, FAX: +49 (0)89 – 85 96 301, MAIL: ciclosport@ciclosport.de
GF: Sabine Hochschorner, Sitz: Martinsried HRB 55936, Ust-ID-Nr: DE129399432, St.Nr: 143/124/70935
Manual CicloAgentPro
Software for the CM 9.3 A (+)
1. General information
1.1 System requirements
Windows: Windows XP, 7 or 8
MAC: Mac OSX Version 10.7 Leopard
2. Installation
You can find all required files for the installation in the sub category “software” on our web page
www.ciclosport.com/cm93a
2.1 Windows
2.1.1 Preparation
Download the files
ANT_USB_Drivers_win.zip and agentpro_install.exe from our web page.
2.1.2 Driver installation
Unpack the .zip file and double click USBXpressInstaller.exe. Select Next > and accept the license if
you agree to it. Finalize driver installation by clicking Finish.
2.1.3 Installing the CicloAgentPro
Start the installation by double clicking agentpro_install.exe. Once the installation wizard started
click Next > and accept the license if you agree to it. Select the desired destination folder for the
installation and click on Install. Finalize installation by clicking Finish.
2.1 Mac
2.2.1 Preparation
Download the files ANT_USB_Drivers_mac.dmg and agentpro.dmg from our web page
2.2.2 Driver installation
Double click the file SiLabsUSBDriverDisk.dmg, and -> devices Silicon Labs VCP Driver Install
Disk appears in finder. Click it and open the file Silicon Labs VCP Driver Installer. Please follow
the installation instructions given in the installation window.
2.2.3 Installing the CicloAgentPro