Symmons SK-7200-PO Installation guide

Symmons
Brand
Symmons
Model
SK-7200-PO
Category
Wall & ceiling mounts accessories
Type
Installation guide

Symmons SK-7200-PO is a single-handle pull-out kitchen faucet with a ceramic cartridge and 3/8" compression connections. Made from metal construction, it is plated in standard polished chrome finish and features a 2.2 gpm (8.3 L/min) aerator. It comes with a limited lifetime warranty for residential installations and a 5-year warranty for industrial/commercial installations. Its dimensions are as follows:

  • Diameter: 1-5/8" (41 mm)
  • Hole size: 1-1/2" (38 mm)
  • Max deck thickness: 1-1/2" (38 mm)
  • Height: 9-5/8" (244 mm)
  • Spout reach: 8-3/8" (213 mm)
  • Handle length: 6-1/4" (159 mm)

Symmons SK-7200-PO is a single-handle pull-out kitchen faucet with a ceramic cartridge and 3/8" compression connections. Made from metal construction, it is plated in standard polished chrome finish and features a 2.2 gpm (8.3 L/min) aerator. It comes with a limited lifetime warranty for residential installations and a 5-year warranty for industrial/commercial installations. Its dimensions are as follows:

  • Diameter: 1-5/8" (41 mm)
  • Hole size: 1-1/2" (38 mm)
  • Max deck thickness: 1-1/2" (38 mm)
  • Height: 9-5/8" (244 mm)
  • Spout reach: 8-3/8" (213 mm)
  • Handle length: 6-1/4" (159 mm)
Dia®
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
SK-7200-PO
Single Handle Pull-Out Kitchen Faucet
Installation Guide
SK-7200-PO
Single Handle Pull-Out Kitchen Faucet
Single Handle Pull-Out Kitchen Faucet shall include single
hole mount conguration, ceramic cartridge,
3/8" compression connections and standard 2.2 gpm
(8.3 L/min) aerator. Faucet shall be made from metal
construction, plated in standard polished chrome nish.
Dimensions
Measurements
A Ø 1-5/8", 41 mm
B Ø 2", 51 mm
CDeck Thickness Ref.
Max. 1-1/2", 38 mm
D Hole Size
Ø 1-1/2", 38 mm
E 9-5/8", 244 mm
F Ø 1-1/8", 29 mm
G 8-3/8", 213 mm
H 6-1/4", 159 mm
I 8", 203 mm
J 3/8" compression tting
CC
DD
EE
AA
BB
FF
HH
GG
II
JJ
Note: Dimensions subject to change without notice.
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI 61.9 c
Options/Modifications
☐-1.0 1.0 gpm (3.8 L/min) aerator
CG
Note: Append appropriate -sufx to model number.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-2194 REV E ■ 052919
Parts Breakdown
Replacement Parts
Item Description Part Number
A
B
C
Handle
Set Screw
Plug Button
RK-041
D Cartridge KN-4
E Spray Wand RK-044
F Pull-Out Hose RK-032-GY
G
H
Aerator
Housing RK-045-1.5
I
J
K
Rubber Washer
Metal Washer
Mounting Nut
RK-043
E
H
G
F
C
B
A
D
I
K
J
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Handle (2 mm)
Plumber Tape
Silicone
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Installation Notes:
1) Apply a bead of silicone around the
perimeter of all faucet trim installed to
deck surface.
2) Apply plumber tape to threaded
connections as necessary.
DO NOT use plumber tape on ttings with
face seal washers or o-rings.
3) DO NOT OVERTIGHTEN ttings with face
seal washers or o-rings.
  • Page 1 1
  • Page 2 2

Symmons SK-7200-PO Installation guide

Symmons
Brand
Symmons
Model
SK-7200-PO
Category
Wall & ceiling mounts accessories
Type
Installation guide

Symmons SK-7200-PO is a single-handle pull-out kitchen faucet with a ceramic cartridge and 3/8" compression connections. Made from metal construction, it is plated in standard polished chrome finish and features a 2.2 gpm (8.3 L/min) aerator. It comes with a limited lifetime warranty for residential installations and a 5-year warranty for industrial/commercial installations. Its dimensions are as follows:

  • Diameter: 1-5/8" (41 mm)
  • Hole size: 1-1/2" (38 mm)
  • Max deck thickness: 1-1/2" (38 mm)
  • Height: 9-5/8" (244 mm)
  • Spout reach: 8-3/8" (213 mm)
  • Handle length: 6-1/4" (159 mm)
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers