Swing-N-Slide NE 4521, WS 4521 Operating instructions

Hello! I've reviewed the document for the Anchor NE 4521. This document provides instructions for anchoring Swing-N-Slide activity centers using Anchor-It stakes. The included components such as metal straps and lag screws are mentioned. I'm ready to answer your questions about securing your equipment.
What is included in the Anchor-It kit?

How do I install the Anchor-It stakes?

What is the purpose of the metal strap?

Anchor-It™

NE 4521

©Swing•N•Slide Corp. 1997 Made in China LA 3113

Kit Includes:

Qty. Description

4Anchor

4Metal Anchor Strap

41-1/2" Lag Bolt

42" Hex Head Bolt

4Flat Washer

4Loc Nut

1Illustrated Plan

Instructions for Anchoring Swing•N•Slide Activity Centers

1. Determine the final location of your activity center.

2. Place the Anchor-It stakes adjacent to the base and near the

corners of your activity center (at the bottom of the legs on

swing sets) and twist the auger-style stakes into the ground

until only the loop is exposed.

3. Place the metal strap through the loop of the Anchor-It stake

and secure it to the unit with a lag screw and washer as

illustrated to the right. Note: Attach the strap to the unit with

as little play as possible using whatever holes in the strap

that work best.

Use the Anchor-It stakes to secure almost any item to the

ground. Included in the hardware are four bolts and loc nuts

for use with non wood applications.

1-1/4"

lag screw

metal strap

Anchor-It

stake

washer