2. Swing-N-Slide Playsets
  3. WS 4521

Swing-N-Slide Playsets WS 4521, NE 4521 Operating instructions

  • Hello! I've reviewed the document for the Anchor NE 4521. This document provides instructions for anchoring Swing-N-Slide activity centers using Anchor-It stakes. The included components such as metal straps and lag screws are mentioned. I'm ready to answer your questions about securing your equipment.
  • What is included in the Anchor-It kit?
    How do I install the Anchor-It stakes?
    What is the purpose of the metal strap?
Anchor-It™
Anchor-It™
R
NE 4521
©Swing•N•Slide Corp. 1997 Made in China LA 3113
Kit Includes:
Qty. Description
4Anchor
4Metal Anchor Strap
41-1/2" Lag Bolt
42" Hex Head Bolt
4Flat Washer
4Loc Nut
1Illustrated Plan
®
Instructions for Anchoring Swing•N•Slide Activity Centers
1. Determine the final location of your activity center.
2. Place the Anchor-It stakes adjacent to the base and near the
corners of your activity center (at the bottom of the legs on
swing sets) and twist the auger-style stakes into the ground
until only the loop is exposed.
3. Place the metal strap through the loop of the Anchor-It stake
and secure it to the unit with a lag screw and washer as
illustrated to the right. Note: Attach the strap to the unit with
as little play as possible using whatever holes in the strap
that work best.
Use the Anchor-It stakes to secure almost any item to the
ground. Included in the hardware are four bolts and loc nuts
for use with non wood applications.
1-1/4"
lag screw
metal strap
Anchor-It
stake
washer
Anchor-It™
Anchor-It™
R
NE 4521
©Swing•N•Slide Corp. 1997 Made in China LA 3113
Kit Includes:
Qty. Description
4Anchor
4Metal Anchor Strap
41-1/2" Lag Bolt
42" Hex Head Bolt
4Flat Washer
4Loc Nut
1Illustrated Plan
®
Instructions for Anchoring Swing•N•Slide Activity Centers
1. Determine the final location of your activity center.
2. Place the Anchor-It stakes adjacent to the base and near the
corners of your activity center (at the bottom of the legs on
swing sets) and twist the auger-style stakes into the ground
until only the loop is exposed.
3. Place the metal strap through the loop of the Anchor-It stake
and secure it to the unit with a lag screw and washer as
illustrated to the right. Note: Attach the strap to the unit with
as little play as possible using whatever holes in the strap
that work best.
Use the Anchor-It stakes to secure almost any item to the
ground. Included in the hardware are four bolts and loc nuts
for use with non wood applications.
1-1/4"
lag screw
metal strap
Anchor-It
stake
washer
SEAL OF APPROVALSEAL OF APPROVAL
/