Noble House 300251 Operating instructions

Type
Operating instructions

This manual is also suitable for

LOVESEAT
CAUTION: You must read this before you proceed.
CAUTION : This Loveseat is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Loveseat and to prevent damage to the Loveseat, 02 persons may be
needed to execute this action
.
Noble House Home Furnishings LLC
1 of 7
No.
Picture
Description
Qty
A
B1
B2
C
D
E
1
1
1
1
1
1
Backrest Panel
Left Leg Panel
Right Leg Panel
Seat Panel
Back Cushion
Seat Cushion
No.
Picture
Description
Qty
1
9
Allen Key
Screw (M7*70mm)
Noble House Home Furnishings LLC
2 of 7
Before Beginning Assembly:
Noble House Home Furnishings LLC
3 of 7
ORERVIEW
FRONT VIEW
Step 1
Unpack and place all parts on a clean, non-marring surface.
This Loveseat has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Loveseat, the above picture is to
help you put the various parts into perspective. Please read through the
instructions here below to familiarise the parts and steps before assembly
.
Left Leg
Panel(B1)
Seat Panel(C)
Seat Cushion
(E)
Backrest
Panel(A)
Back
Cushion(D)
Right Leg
Panel(B2)
Noble House Home Furnishings LLC
4 of 7
Step 2
Step 2.1
Step 2.2
Step 3
2.1) Position Seat Panel (C) to Left Leg Panel (B1) and then position Right
Leg Panel (B2) onto Seat Panel (C) as shown in picture above
2.2) Secure Right Leg Panel (B2) to Seat Panel (C) by using Screw (
)
and Allen Key (
)
Do not fully tighten the Screws.
With assistance from your adult partners, turn the Chair into the other side
Repeat the same process of step 2 to secure Left Leg Panel (B1) with Seat
Panel (C) by using Screw (
) and Allen Key (
)
Do not fully tighten the Screws.
1
2
B2
B1
C
B1
B2
C
1
2
B2
Noble House Home Furnishings LLC
5 of 7
Step 4
1
2
2
A
D
E
B1
B2
Turn the Loveseat right side up.
Position Backrest Panel (A) to Leg Panels (B1 & B2) as the picture above.
Secure Leg Panels (B1), (B2) to Backrest Panel (A) by using Screws (
),
and Allen Key (
)
Do not fully tighten the Screws.
Step 5
EXERT pressure, floorwards, onto the Loveseat.
This pressure will help all parts reach alignment at all joints.
Check for wobbles.
Inspect the Loveseat and make sure all parts are connected.
Place Back Cushion (D) and Seat Cushion (E) onto the Loveseat
Tie the velcro straps of Back Cushion (D) and Seat Cushion (E) to Seat
Panel (C).
Your Loveseat is ready for use.
This Loveseat can only be used on a flat, level surface.
Noble House Home Furnishings LLC
6 of 7
Noble House Home Furnishings LLC
7of 7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Noble House 300251 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI