American Standard T186508.295 Installation guide

American Standard
Brand
American Standard
Model
T186508.295
Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

B71
© 2015 AS America Inc.
Revised 5/15
MODEL NUMBER:
TRIM KITS:
T186.508 Fluent BATH/SHOWER Trim Kit
Lever handle. FloWise showerhead. LESS valve body.
T186.507 Fluent SHOWER ONLY Trim Kit
Lever handle. FloWise showerhead. LESS valve body.
For use with R110 Series Pressure Balance Valves.
See reverse side for available Rough Valves.
T186.508 Bath/Shower Trim Shown
*WaterSense
®
approval pending
*
T186.508 Bath/Shower trim kit. Lever handle. FloWise showerhead. LESS valve body.
Finish Options
Product
Number
Description
T186.507 Shower Only trim kit. Lever handle. FloWise showerhead. LESS valve body.
Oil Rubbed
Bronze
224
Polished
Chrome
002
PVD
Satin Nickel
295
TRIM KITS *
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
5" REF.
(127 mm)
8-1/2" REF.
(216 mm)
2-3/8" D.
(60 mm)
FINISHED
WALL
TOP OF TUB RIM
BOTTOM OF TUB
1/2" COPPER
"SEE ILLUSTRATION"
4" (102 mm)
74" (1880 mm)
FOR HEAD
CLEARANCE
18"
(457 mm)
OPTIONAL
OPTIONAL TO
FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 80''
(1651 mm AND 2032 mm)
1/2" NPT
(13 mm)
8" DIA.
(204 mm)
1-3/4
"
(44 mm)
O f f
C
H
6-19/32" REF.
(167 mm)
GENERAL DESCRIPTION:
SHOWERHEAD
Water saving 3-function FloWise
showerhead offers up to
40% water savings at maximum 2.0 gpm/7.6 L/min. flow rate.
WALL TUB SPOUT
Metal slip-on diverter spout.
WALL VALVE TRIM
Available with metal lever handle.
Metal wall escutcheon.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving 3-function showerhead with Max. 2.0 gpm/7.6 L/min. flow rate. Fitting shall be:
American Standard - Trim Kit Model # T186.50_.___ and Valve Body Model # R11_.
1/2" NPT
1-1/4" (32 mm)
DIA. HOLE
6-19/32"
(167 mm) REF.
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125.1
IPS Spout
Factory
Installed
Decal Ring
(Red/Blue)
___IPT
___WD
Modifications
Parts
Suffix*
*To modify a product, add suffix after the
4
th
digit (ex. T064ITP502.002)
C
H
O
F
F
O
N
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
Shower
10080604020
R111
R111SS
R110
R110SS
R115
R115SS
R117
R117SS
R118
R118SS
R119
R119SS
Rough Valve Body less trim. Universal inlets/outlets.
Rough Valve Body less trim. Universal inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Direct sweat inlets/outlets.
Rough Valve Body less trim. Direct sweat inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807).
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807)
with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960).
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960)
with Screwdriver Stops.
Rough Valve Body less trim. CPVC inlets/universal outlets.
Rough Valve Body less trim. CPVC inlets/universal outlets with Screwdriver Stops.
Product
Number
Description
ROUGH VALVE BODIES
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
FLUENT
™
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FLOWISE
®
SHOWERHEAD
B72
© 2015 AS America Inc.
Revised 5/15
FLUENT
™
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FLOWISE
®
SHOWERHEAD
MODEL NUMBER:
TRIM KITS:
T186.508 Fluent BATH/SHOWER Trim Kit
Lever handle. FloWise showerhead. LESS valve body.
T186.507 Fluent SHOWER ONLY Trim Kit
Lever handle. FloWise showerhead. LESS valve body.
For use with R110 Series Pressure Balance Valves.
See reverse side for available Rough Valves.
T186.508 Bath/Shower Trim Shown
*WaterSense
®
approval pending
*
T186.508 Bath/Shower trim kit. Lever handle. FloWise showerhead. LESS valve body.
Finish Options
Product
Number
Description
T186.507 Shower Only trim kit. Lever handle. FloWise showerhead. LESS valve body.
Oil Rubbed
Bronze
224
Polished
Chrome
002
PVD
Satin Nickel
295
TRIM KITS *
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
5" REF.
(127 mm)
8-1/2" REF.
(216 mm)
2-3/8" D.
(60 mm)
FINISHED
WALL
TOP OF TUB RIM
BOTTOM OF TUB
1/2" COPPER
"SEE ILLUSTRATION"
4" (102 mm)
74" (1880 mm)
FOR HEAD
CLEARANCE
18"
(457 mm)
OPTIONAL
OPTIONAL TO
FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 80''
(1651 mm AND 2032 mm)
1/2" NPT
(13 mm)
8" DIA.
(204 mm)
1-3/4
"
(44 mm)
O f f
C
H
6-19/32" REF.
(167 mm)
GENERAL DESCRIPTION:
SHOWERHEAD
Water saving 3-function FloWise
showerhead offers up to
40% water savings at maximum 2.0 gpm/7.6 L/min. flow rate.
WALL TUB SPOUT
Metal slip-on diverter spout.
WALL VALVE TRIM
Available with metal lever handle.
Metal wall escutcheon.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving 3-function showerhead with Max. 2.0 gpm/7.6 L/min. flow rate. Fitting shall be:
American Standard - Trim Kit Model # T186.50_.___ and Valve Body Model # R11_.
1/2" NPT
1-1/4" (32 mm)
DIA. HOLE
6-19/32"
(167 mm) REF.
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125.1
IPS Spout
Factory
Installed
Decal Ring
(Red/Blue)
___IPT
___WD
Modifications
Parts
Suffix*
*To modify a product, add suffix after the
4
th
digit (ex. T064ITP502.002)
C
H
O
F
F
O
N
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
Shower
10080604020
R111
R111SS
R110
R110SS
R115
R115SS
R117
R117SS
R118
R118SS
R119
R119SS
Rough Valve Body less trim. Universal inlets/outlets.
Rough Valve Body less trim. Universal inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Direct sweat inlets/outlets.
Rough Valve Body less trim. Direct sweat inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807).
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807)
with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960).
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960)
with Screwdriver Stops.
Rough Valve Body less trim. CPVC inlets/universal outlets.
Rough Valve Body less trim. CPVC inlets/universal outlets with Screwdriver Stops.
Product
Number
Description
ROUGH VALVE BODIES
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
  • Page 1 1
  • Page 2 2

American Standard T186508.295 Installation guide

American Standard
Brand
American Standard
Model
T186508.295
Category
Sanitary ware
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents