SUPERCHARGED
JV252
2-Speed Cordless
& Bagless Stick
Vacuum Cleaner
USER GUIDE
Model
JV252
- 2 -
User Guide
Read all safety precautions before use.
Retain instructions for future reference.
JV252
A S S E M B LY
JV252
- 3 -
User Guide
Lorem ipsum
TABLE OF CONTENTS
SAFETY PRECAUTIONS ......................................................... 4
COMPONENTS....................................................................... 5
UNPACKING AND ASSEMBLING....................................... 6 - 7
VACUUMING .......................................................................... 8
SWITCHING THE WORKING SPEED ...................................... 8
CHARGING THE UNIT............................................................ 9
EMPTYING & CLEANING ............................................. 10 - 12
HOW TO CLEAN THE ROLLER BRUSH ............................... 13
HOW TO CLEAN THE WHEEL AXLES .................................. 13
HOW TO STORE THE VACUUM CLEANER .......................... 14
SERVICING OR REPAIRS..................................................... 14
BASIC TECHNICAL DATA ..................................................... 15
DISPOSAL OF THE UNIT...................................................... 15
JV252
- 4 -
User Guide
SAFETY PRECAUTIONS
1. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without supervision
2. This appliance is designed for domestic use only.
3. DO NOT pull on the connection cord, but rather on the plug, to separate the appliance from
the main socket.
4. DO NOT use outdoor.
5. DO NOT leave the appliance unattended when it is switched on, as this may be a source of
danger.
6. Stand the appliance on a table or flat surface.
7. If the power cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
8. Following objects are strictly banned, otherwise the vacuum cleaner will be damaged or fire
calamity will be caused, which bring such accidents as human body injuries: • DO NOT pick
up large or sharp broken such as glasses, • DO NOT pick up harming or erodent liquids
(solvent, corrosive, detergent…), • DO NOT pick up inflammable or explosive substance
such as gasoline or alcohol.
9. Check the device and connections regularly for visible damage. The device must not be used
if the housing is damaged or other damage is present.
10. Never attempt to open the device or the main adapter yourself or to replace the connecting
cable. Always have repairs to the device carried out by a specialist workshop. There is
considerable danger to the user if repairs are faulty.
11. DO NOT trap the main adapter cable and when using the adapter, pay attention to where the
cable is to prevent any danger of tripping over it. Keep the cable away from heated surfaces
(e.g. cooker surfaces).
12. DO NOT touch the main adapter and cable with wet hands.
13. DO NOT point the vacuum cleaner at persons or animals when in operation.
14. Only use the main adapter on dry surfaces in buildings.
15. Only use the device with the accessories supplied.
16. Please keep these instructions in a safe place.
17. Use only with the provided adaptor.
18. The appliance must only be supplied at safety extra low voltage corresponding to the
marking on the appliance.
19. This appliance includes Li-ion batteries; DO NOT incinerate the batteries or expose to high
temperatures, as they may explode.
20. This appliance can only charged with the adaptor delivered together
1
2
3
4
5
6 7 8
9
11
1
2
3
4
5
6 7 8
9
10
JV252
- 5 - User Guide
COMPONENTS
1. Body
2. Dust cup assembly
3. HEPA filter cover
4. HEPA filter
5. Power roller floor brush
6. Charger
7. Battery
8. Wall Mount Bracket Hanger
9. 3-in-1 Tool
10. Carpet brush
11. Aluminum tube
JV252
- 6 -
User Guide
UNPACKING AND ASSEMBLING
Check that all the parts are in the box. Parts breakdown index is
on previous page.
Step 1.
Install the battery as shown in below picture
Step 2.
Install the electrical brush by inserting it into tube carefully.
Step 3.
Install the tube with brush by inserting it into the vacuum suction tube.
JV252
- 7 -
User Guide
Step 4.
Install the 3-in-1 accessories to suction tube or tube of vacuum
cleaner as shown in drawings.
Simply push out the tip
Push and slide
Result
Crevice Tool
Fibers & Hair Tool
Dusting Tool
1
1
2
2
3
3
3-in-1 Tool
JV252
- 8 -
User Guide
VACUUMING
Vacuuming oors and carpets
You should regularly check that the nozzle cushions and the brush roller
are clean in order to avoid scratching sensitive floors.
Follow Step 1 to Step 3 to assemble the whole unit and then start the
device by pushing the on/off button.
To clean the tables, furnitures, car seats or some corners, just remove the
tube by pressing the release button.
Follow Step 4 to install the 3-in-1 tools, then press the on/off button to
start cleaning.
To clean up for various situations, the appliance has two different working
speeds. First, assemble the appliance shown by the 4 steps above. Press
the ON / OFF button to switch on the power.
The appliance will work under the standard speed. Press the speed control
button, the work speed will switch to High Speed Mode. To return to the
standard speed, press the speed control button again. You can switch
between two different working speeds anytime according to your require-
ment.
Vacuuming tables, furnitures, car seats etc.
SWITCHING THE WORKING SPEED
Speed Control Button
ON/OFF button
JV252
- 9 -
User Guide
CHARGING THE UNIT
Insert the adaptor into a main socket before connecting (Note: Always
make sure that the device is turned OFF) and then connect the device. The
indicator light will become bright gradually and then, extinguished
gradually as well. This state will continue unit the battery is fully charged
by 50 seconds period. Once the device has made contact with the adaptor,
it will take 2.5 - 3 hours or so to fully charge the battery before the first use.
The adaptor may become warm during charging-this is normal.
After the battery is fully charged, the four lights will keep bright for 50
seconds before extinguishing. It needs to be removed from the adapter or
turned off the A.C power.
During the charging process, if the battery surface temperature is beyond
50° or lower than 0°, the battery will enter into self-protection mode and
will stop charging until battery surface temperature goes back to 0°- 45°.
Notice About Charging
JV252
- 10 -
User Guide
EMPTYING & CLEANING
Notice About Discharging
When the battery is discharged, the four lights will turn off gradually. Until
charge is above 8%, the last light will keep flashing, reminding the operator
to stop using the vacuum cleaner and charge the battery.
During discharging process, if the battery surface temperature exceeds
70°, the four lights will keep flashing for 5 seconds, the battery will then
enter into self-protection mode, battery will stop working. When the
battery surface temperature goes back to 65°, the battery can work again.
Step 1.
Remove the accessories from the body by pressing the release button
Step 2.
Press the release button to open the dust cup cover, drop out the trash
into the dustbin
JV252
- 11 -
User Guide
Step 3.
Remove the dust cup by pressing the release button, clean the cyclone
part with a toothbrush
Make sure that the parts are dry before they are assembled back for next
use.
Step 4.
Press the button to open the HEPA cover, take out the HEPA lter to
wash it under running water
Dry it in air naturally before next usage or open the front cover of vacuum
cleaner to replace with a new HEPA filter.
JV252
- 12 -
User Guide
Re-install the components
Firstly re-install the dust cup back to the unit following up the opposite
procedures when detaching the dust cup, then install the HEPA filter, the
tube set, brush or 3-in-1 tools for next use.
JV252
- 13 -
HOW TO CLEAN THE ROLLER BRUSH
If the roller brush becomes blocked or jammed for any reason, the vacuum
will be lowered down. The roller brush may then need to be cleaned. Switch
off the device then carefully using a pair of scissors or a sharp knife remove
any items such as threads that may have become entangled.
If the roller brush needs to be taken out for cleaning, push slip button on
the bottom of brush with a finger or a coin, as shown in below picture.
Replace the roller brush after cleaning by using the slip button and lock it.
REMINDER: Keep the slip button within your eyesight and keep it out of
reach of children.
HOW TO CLEAN THE WHEEL AXLES
If a wheel is jammed by threads or dirt: Remove the wheels and carefully
lift jammed objects using a screwdriver inserted into the cavity.
Remove threads or any other objects that may have become jammed in the
wheels axles. Reassemble the wheels by pressing them tightly together.
User Guide
JV252
- 14 -
HOW TO STORE THE VACUUM CLEANER
Install the wall-mounted tool on the wall, put the vacuum cleaner by
inserting it into hook as shown in below picture.
SERVICING OR REPAIRS
In case of breakdown or faults, the device must be taken to an authorized
service center for repair or replacement.
User Guide
JV252
- 15 -
BASIC TECH NI CAL DATA
DISPOSAL THE UNIT
User Guide
Model: JV252
BLDC motor:
• High speed - 300 W
• Low speed - 120 W
25.2 V - 2200 mAh Li-ion battery
Adapter: Input: 100~240 V - 50 Hz, Output: 30 V - 1 A
Charge time: 2.5 H - 3 H
IF THE DEVICE IS TO BE DISPOSED OF, THE BATTERY SHOULD BE REMOVED.
USED BATTERIES SHOULD NEVER BE DISPOSED OF WITH HOUSEHOLD WASTE.
THESE SHOULD ALWAYS BE TAKEN TO A RECYCLING STATION.
GUIDE D'UTILISATEUR JV252 - FR-EN
Residential and commercial
vacuum cleaner specialist
FOR
PARTS, ACCESSORIES & VACUUM BAGS
VISIT OUR WEBSITE AT
WWW.JOHNNYVAC.COM
CONGRATULATIONS & THANK YOU
for having chosen one of our product.
Do not return the unit to the retailer
before having spoken with us.
Our most precious wish is that
you really love your vacuum cleaner!
In case of problems, contact our experts at 1 800 361-2043
or by email at [email protected]
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
