GENERAL
#18 gauge, type 304 (18-8), stainless steel wheelchair lavatory
with 5/32" (4mm) raised rim. Compartment has 1-3/4" (44mm)
radius vertical and horizontal coved corners. 2-1/2" (64mm)
apron front and both sides. Exposed surfaces are hand
blended to a uniform lustrous satin finish. Unexposed under-
side is fully undercoated to reduce condensation and dampen
sound. Furnished with separate wall hanger, integral
stainless steel support brackets and grid strainer with elbow
and offset tailpiece. Meets ADA requirements.
(CHECK MODEL SPECIFIED)
WCL1923OSDC
WCLWO1923OSDC (WITH CONNECTED OVERFLOW)
FURNISHED COMPLETE WITH:
SUPPLY: LKD232SBH5C chrome plated restricted swing goose-
neck spout faucet with aerator and 5" wrist blade
handles.
DRAIN: LKAD174 Chrome plated perforated strainer grid
with cast brass elbow and 1-1/4" offset tailpiece.
FOLLOWING MODELS DO NOT INCLUDE FAUCET (IN-
CLUDES DRAIN):
(CHECK MODEL SPECIFIED)
See other side for standard faucet hole drilling configurations.
WCL1923OSD
WCLWO1923OSD (WITH CONNECTED OVERFLOW)
DIMENSIONS
Compliant
OVERFLOW
(only for Series WCLWO)
5-1/8"
(130mm)
15/16"
(24mm)
5/8"
(16mm)
F
1-3/4" R
(44mm)
5"
(127mm)
18"
(457mm)
FINISH FLOOR
8-7/8"
(225mm)
STAINLESS STEEL HOUSING
WITH RUBBER WASHER
FURNISHED LOOSE WITH
NON-OVERFLOW MODELS
G
G
H
4 SLOTS 1/4" (6mm)x1" (25mm)
HII
F
5"
(127mm)
1-1/4"
(32mm)
WALL HANGER
3/8" (10mm) DIA.
2 HOLES
EACH BRACKET
31-1/2"
(800mm)
(RECOMMENDED)
2-1/2"
(64mm)
1-3/4" R
(44mm)
RAISED RIM
FRONT & ENDS
1-5/8" (41mm) DIA.
FINISHED HOLE
9-1/2"
(241mm)
3-1/2"
(89mm)
4-1/2"
(114mm)
1"
(25mm)
B
D
A
C
E E
SEE OTHER SIDE
FOR FAUCET HOLE
DRILLING CONFIGURATIONS
TOP
FRONT
SIDE
Model WCL1923OSDC
Model LKD232DBH5C
Model LKAD174
Model
Number
A B C D E F G H I
WCL1923OSD 1254
15
/16
2
5
/8
2
5
/8
64
64
67
2
3
/440616343
40616343 2
3
/4
13
1
/25842348319
13
1
/25842348319
102470
70
4
102
2
2
67 4
15
/16
In. mm In. mm In. mm In. mm In. mm In. mm In. mm In. mm In. mm
WCLWO1923OSD 125
Wheelchair Lavatory
Wall Mounted
Models WCL1923OSDC, WCL1923OSD,
WCLWO1923OSDC and WCLWO1923OSD
®
SPECIFICATIONS
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers offerings, be certain these featrues are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 03/14)
3-21M
elkay.com
These sinks are compliant to ADA and ANSI/ICC A117.1
accessibility requirements when installed according to the
requirements outlined in these standards.
Wheelchair Lavatory
Wall Mounted
Models WCL1923OSDC, WCL1923OSD,
WCLWO1923OSDC and WCLWO1923OSD
®
SPECIFICATIONS
1-1/4" (32mm) DIA. 1 HOLE
1-1/2"
(38mm)
Models WCL1923OSD1
WCLWO1923OSD1
1-1/2" (38mm) DIA. 3 HOLES
1-1/2"
(38mm)
4"
(102mm)
4"
(102mm)
Models WCL1923OSD3
WCLWO1923OSD3
HOLE DRILLING CONFIGURATIONS
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers offerings, be certain these featrues are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 03/14)
3-21M
elkay.com
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Elkay LK2000CR Dimensions Guide
-
Elkay LK9 Dimensions Guide
-
-
-
-
-
-
-
-
