Draper PCL Airforce Analogue Tyre Inflator

This inflator is suitable for inflation uses in automotive environments such as garage forecourts and tire fitting bays. It has a maximum inlet pressure of 15bar/218PSI/1500kPa and an inflation range of 0-12bar/174PS1/1200kPa. The hose length is 1.8 meters. It has an accuracy of 0.1bar/2PSI/10kPa and exceeds EC 86/217.

This inflator is easy to use. To connect the air line gauge to an air line, a 4" BSP male thread whip hose is required. Wind a length of PTFE tape around the thread before securing the hose in place.