Draper PCL Airforce Analogue Tyre Inflator Operating instructions

Category
Power tools
Type
Operating instructions

Draper PCL Airforce Analogue Tyre Inflator

This inflator is suitable for inflation uses in automotive environments such as garage forecourts and tire fitting bays. It has a maximum inlet pressure of 15bar/218PSI/1500kPa and an inflation range of 0-12bar/174PS1/1200kPa. The hose length is 1.8 meters. It has an accuracy of 0.1bar/2PSI/10kPa and exceeds EC 86/217.

This inflator is easy to use. To connect the air line gauge to an air line, a 4" BSP male thread whip hose is required. Wind a length of PTFE tape around the thread before securing the hose in place.

Draper PCL Airforce Analogue Tyre Inflator

This inflator is suitable for inflation uses in automotive environments such as garage forecourts and tire fitting bays. It has a maximum inlet pressure of 15bar/218PSI/1500kPa and an inflation range of 0-12bar/174PS1/1200kPa. The hose length is 1.8 meters. It has an accuracy of 0.1bar/2PSI/10kPa and exceeds EC 86/217.

This inflator is easy to use. To connect the air line gauge to an air line, a 4" BSP male thread whip hose is required. Wind a length of PTFE tape around the thread before securing the hose in place.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Draper PCL Airforce Analogue Tyre Inflator Operating instructions

Category
Power tools
Type
Operating instructions

Draper PCL Airforce Analogue Tyre Inflator

This inflator is suitable for inflation uses in automotive environments such as garage forecourts and tire fitting bays. It has a maximum inlet pressure of 15bar/218PSI/1500kPa and an inflation range of 0-12bar/174PS1/1200kPa. The hose length is 1.8 meters. It has an accuracy of 0.1bar/2PSI/10kPa and exceeds EC 86/217.

This inflator is easy to use. To connect the air line gauge to an air line, a 4" BSP male thread whip hose is required. Wind a length of PTFE tape around the thread before securing the hose in place.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI