Quadratec 12-Volt LED Christmas Wreath Installation guide

TO BE SAFE WHILE INSTALLING THIS PRODUCT, READ ALL MESSAGES AND

UNDERSTAND ALL INSTRUCTIONS.

ONLY USE THE WREATH WHILE THE VEHICLE IS RUNNING. UNPLUG THE CORD

FROM THE 12V SOCKET WHEN NOT IN USE TO AVOID DRAINING THE BATTERY.

MAKE SURE ALL WIRES ARE KEPT AWAY FROM MOVING PARTS OR

EXHAUST COMPONENTS. USE THE SUPPLIED CABLE TIES TO SECURE

WIRES PROPERLY.

12 Volt LED Automotive Christmas Wreath

Installation & Use Guide: 12VWREATH

The Automotive Christmas wreath is intended for use with any 12v automotive cigarette lighter outlet.

The wreath is suitable for interior or exterior mounting.

Use the longer Cable ties to secure the wreath in place. The shorter cable ties and suction cups should be used to

secure the power cord when mounting on the exterior of the vehicle. Make sure all wires are properly secured.

Keep wires away from moving parts and hot components like exhaust systems.

The power cord has a quick disconnect at the end closest to the wreath.

This allows you to disconnect the power cord from the wreath in order to route the wire.

Only use the wreath while the vehicle is running.

Unplug the cord from the cigarette lighter when not in use to avoid draining the battery.

KIT CONTENTS LIST:

Led Wreath Qty1

16’ Power Cord Qty1

Suction Cups Qty2

Short Cable Ties Qty2

Long Cable Ties Qty2

WREATH.indd 1 7/15/19 10:08 AM