Home Accents Holiday 4723173-C29HO1 Operating instructions

Type
Operating instructions

Home Accents Holiday 4723173-C29HO1 is a pre-tested 48in Wreath that is intended for seasonal (90 days max.) installation and use. It comes with LED bulbs, eyebolts and fuses. The LED bulbs are a specialty type and should not be replaced with standard LED or incandescent bulbs. In case of any issues with the bulbs, contact customer service for replacements. The wreath has coaxial connections to connect the light strings. To connect, align the male end to the female connectors and connect them together. Slide the cover from the “male” connector over the “female” connector and tighten.

Home Accents Holiday 4723173-C29HO1 is a pre-tested 48in Wreath that is intended for seasonal (90 days max.) installation and use. It comes with LED bulbs, eyebolts and fuses. The LED bulbs are a specialty type and should not be replaced with standard LED or incandescent bulbs. In case of any issues with the bulbs, contact customer service for replacements. The wreath has coaxial connections to connect the light strings. To connect, align the male end to the female connectors and connect them together. Slide the cover from the “male” connector over the “female” connector and tighten.

ASSEMBLY INSTRUCTIONS
(We recommend wearing proper clothing in order to prevent
scratches that may occur during the assembly process.)
Carefully unpack all Wreath components from the carton (Fig 1).
Your Wreath should include the following:
1 Wreath folded in half.
1 Bag of replacement LED bulbs, eyebolts and fuses.
NOTE: DO NOT USE ANY ADDITIONAL CHRISTMAS
LIGHTING OR ORNAMENTATION THAT IS POWERED BY A
LIGHT BULB SOCKET. DOING THIS MAY RESULT IN DAMAGE
TO THIS PRODUCT OR CAUSE PERSONAL INJURY. THIS
ACTION WILL RESULT IN A VOID OF THE LIMITED
WARRANTY OF THIS PRODUCT.
1. Leave assembled if storage room permits or disassemble,
placing all components in the original carton.
2. Store in cool, dry location away from sunlight.
STORAGE INSTRUCTIONS
NOTE: Check the item for any loose, unlit or damaged bulbs.
Although it will still operate, the bulbs must be replaced
promptly to ensure the performance and life expectancy of
the item.
1. If the sculpture fails to light; unplug the product and check to
see that the GFCI outlet is functioning.
2. If a section fails to light, leave the product plugged in and
check all light string connections. This product uses coaxial
connections to connect the light strings; align the male end to
the female connectors as shown and connect them together.
Slide the cover from the “male connector over the “female
connector and tighten.
NOTE: Replacement bulbs are provided; this is a specialty LED
bulb. Do not attempt to replace with a standard LED or
incandescent bulb. Should you require additional bulbs please
contact our customer service department.
TROUBLESHOOTING
CCT17
Model No. 4723172-C29HO1/4723172-30HO1
4723173-C29HO1/4723173-30HO1
Fig 1
ASSEMBLY OF THE WREATH
1. Unfold your wreath facing it down (Fig 2).
2. Twist the 2 eyebolts to secure the wreath in the open position
(Fig 3).
Fig 2
Fig 4
3. Once the 2 joints have been secured flip your wreath over so
the front is facing you (Fig 4).
You have completed the assembly of the wreath.
Fig 3
Replacement LED bulbs,
eyebolts and fuses
Made in China
Printed in China
This is not a toy, for decorative use only.
DISTRIBUTED BY HOME DEPOT U.S.A., INC. 2455
PACES FERRY RD., N.W. Atlanta, GA 30339 All rights reserved.
This product was pre-tested before shipment and date
coded. In keeping with the National Electric Code, this
product is intended for seasonal (90 days max.) installation
and use. For problems or questions on this product call
Home Depot customer service toll-free at 1-877-527-0313.
11.5”
2017 Home Depot.com
36in / 48in Wreath - Instruction Sheet (English)
Date: 5/16/17
11.5”
Item # 4723172-C29HO1/4723172-30HO1 (36in)
4723173-C29HO1/4723173-30HO1(48in)
INSTRUCCIONES PARA EL ENSAMBLAJE
(Recomendamos llevar ropa apropiada para evitar rasguños
que pueden ocurrir durante el proceso de ensamblaje.)
Quite cuidadosamente todas las piezas del embalaje (Fig 1). El
corona debe incluir los siguientes componentes:
1 corona doblada por la mitad.
1 bolsillo de bombillas de reemplazo LED, pernos de argolla y
fusibles.
Modelo N° 4723172-C29HO1/4723172-30HO1
4723173-C29HO1/4723173-30HO1
CCT17
Fig 1
Bombillas LED de recambio,
pernos de argolla y clips para luces
MONTAJE DE LA CORONA
1. Coloque la maceta con la sección A unida en el lugar deseado
(Fig 2).
NOTA: Verifique el artículo para detectar las bombillas que
puedan estar flojas, apagadas o dañinas. Aunque todavía
funcionara, debe reemplazar las bombillas rápidamente para
asegurar el rendimiento y la duración de vida útil del artículo.
1. Si no enciende; desenchufe el artículo y verifique si el
tomacorriente de tipo GFCI funciona.
2. Si una sección no enciende; deje el producto enchufado y
verifique todas las conexiones del ensamble de luces. Este
producto utiliza conectores coaxiales. Para conectar las luces;
alinee los extremos machos con los conectores hembra como
se muestra y conéctelos juntos. Deslice el recubrimiento del
conector “macho por encima del conector “hembra y
apriételo.
NOTA: Las bombillas de recambio se proporcionan; ésta es
una bombilla LED especializada. No la sustituya con una
bombilla LED estándar o una bombilla incandescente. Si
requiere más bombillas, por favor comuníquese con nuestro
Departamento de Servicio al Cliente.
PROBLEMAS / SOLUCIONES
NOTA: NO UTILICE CUALQUIER ILUMINACIÓN O ADORNO
NAVIDEÑO ADICIONAL, EL CUAL ESTÁ ALIMENTADO POR UN
CASQUILLO DE BOMBILLA. AL HACERLO, PUEDE DAÑAR ESTE
PRODUCTO O PROVOCAR LESIONES. ADEMÁS AL HACERLO,
ANULARÁ LA GARANTÍA LIMITADA DE ESTE PRODUCTO.
1. Mantenga la estructura montada si hay espacio suficiente para
guardarla, o desmóntela. Coloque todos los componentes en el
embalaje original.
2. Guárdelo en un lugar fresco y seco, lejos de la luz del sol.
INSTRUCCIONES PARA ALMACENAMIENTO
Fig 2
2. Gire las 2 pernos de argolla para asegurar la corona en la
posición abierta (Fig 3).
Fig 4
3. Cuando las 2 juntas están aseguradas, dé la vuelta a la corona
de modo que la parte delantera quede frente a Usted (Fig 4).
Ha completado la montaje de la corona.
Fig 3
Hecho en China
Impreso en China
No es un juguete – solamente para uso decorativo.
DISTRIBUIDO POR HOME DEPOT U.S.A., INC. 2455
PACES FERRY RD., N.W. ATLANTA, GA 30339
Todos los derechos reservados.
Este producto ha sido previamente probado antes del
envío y también se ha dado una codificación de fecha.
De acuerdo con el Código Eléctrico Nacional de Estados
Unidos (NEC), este producto está diseñado para una
instalación estacional (máx. 90 días) y uso. Si tiene
problemas o inquietudes con este producto, llame sin
costo al servicio de Home Depot al 1-877-527-0313.
11.5”
11.5”
2017 Home Depot.com
36in / 48in Wreath - Instruction Sheet (Spanish)
Date: 5/16/17
Item # 4723172-C29HO1/4723172-30HO1 (36in)
4723173-C29HO1/4723173-30HO1(48in)
  • Page 1 1
  • Page 2 2

Home Accents Holiday 4723173-C29HO1 Operating instructions

Type
Operating instructions

Home Accents Holiday 4723173-C29HO1 is a pre-tested 48in Wreath that is intended for seasonal (90 days max.) installation and use. It comes with LED bulbs, eyebolts and fuses. The LED bulbs are a specialty type and should not be replaced with standard LED or incandescent bulbs. In case of any issues with the bulbs, contact customer service for replacements. The wreath has coaxial connections to connect the light strings. To connect, align the male end to the female connectors and connect them together. Slide the cover from the “male” connector over the “female” connector and tighten.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI