© 2016 Spectrum Industries Inc., All rights reserved.
Assembly Instructions
Phillips
screwdriver
Tools
Required
Drill with
Phillips driver
0118409R1 Page 1 of 1
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
Keyboard Tray
55379
1. Installation
1. Align the keyboard tray assembly with the (6) pre-drilled mounting holes
under the worksurface. Figure 1. (2 people may be needed to install.)
2. Install (6) #8 x 3/4” PHSM screws to secure to the worksurface.
Tighten securely. (If using an electric drill, be sure to use a low
torque setting to avoid stripping the worksurface holes.
3. Use the tray slots and zip ties or hook and loop straps (not
included) to secure cords.
2. Tray / Drawer
1. To ip, pull out the tray and locate the black plastic lever on each slide.
2. Release the levers (left-down, right-up) while pulling the tray out of
the slides.
3. Flip the tray, re-align the slides, and push back in.
Note: The dual-use tray can be used as a keyboard tray, or easily ipped
and used as a drawer.
3. Height adjustment (optional)
1. The tray height can be adjusted by repositioning the slides using 8-32
screws, locknuts, and height-adjustment holes. Figure 2.
2. To adjust the height, remove the (3) 8-32 screws and locknuts (with
11/32” wrench) from each side. (Slide the tray to access each screw).
3. At the new height, replace the screws and locknuts and tighten securely.
(6) 026073
#8 x 3/4” PHSM
(1) 0118082
Keyboard Tray
#8 x 3/4” PHSM
(6 total)
8-32 screws
and locknuts
Worksurface
Keyboard Tray
Figure 2 Figure 1
-
1
Spectrum Industries 55379 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Spectrum Industries 55356B User manual
-
-
-
-
-
Spectrum Industries Keyboard Tray Owner's manual
-
-
-
-