2. Danfoss
  3. 014G0257
014G0257

Danfoss 014G0257 User manual

  • Hello! I'm here to assist you with information about Danfoss M28 and K adapters. This document provides instructions on the removal of these pre-mounted adapters from Danfoss Ally and Eco devices. The process includes entering mounting mode and unscrewing the thermostat from the adapter. I'm ready to answer your questions based on the document provided.
  • How to enter mounting mode?
    What is the next step after entering mounting mode?
    How to unscrew the thermostat from the adapter?
M28 ADAPTER (Orkli)
M28 ADAPTER (Orkli)
014G0257
013R9552 | AN098186405353en-010401 | ECM 510000023546
013R9552 | AN098186405353en-010401 | ECM 510000023546
5702420120461
5702420120461
1. M28-adapter
2. K-adapter
Fold
Fold
Danfoss Ally™
Danfoss Eco™
4.
3.
How to remove a pre-mounted adapter
1. 2.
Remove the cover.
3.
Press firmly on the tab and unscrew the thermostat from the adapter.
Press and hold until large
M flashes. This indicates you are
in mounting mode.
/