05 07 09
01 02 03
10 12 13 14 15 16 17 18 19
04
INTELLIGENT PROJECTOR
MADE IN CHINA
08
*Do not place objects within 20cm of the heat dissipation hole
INTELLIGENT PROJECTOR
MADE IN CHINA
11
120
INTELLIGENT PROJECTOR
MADE IN CHINA
CAUTIONS AND WARNINGS LIST OF ITEMS THE REMOTE CONTROL PRODUCT DETAILS INSTALLATION AND DEBUGGING
INSTALLATION AND DEBUGGING INSTALL THE EQUIPMENT THE SOFTWARE SETTINGS MEDIA PLAYER CLEAN AND MAINTAIN
INTELLIGENT PROJECTOR
MADE IN CHINA
INTELLIGENT PROJECTOR
Please use the original power adapter.
Using a non original adapter may cause faults such as short circuit of the host computer, lens burning, and so on!
INTELLIGENT PROJECTOR
MADE IN CHINA
黑白印刷
封面：0.2MM（157G双铜）
内页：0.07MM（105G双铜）
装订翻页（按照页码排版）
06
INTELLIGENT PROJECTOR
MADE IN CHINA
CATALOGUE
Same screen
130.00 mm
88.00 mm
HD M I
HDMI
Cautions And Warnings
List Of Items
The Remote Control
Product Details
Installation And Debugging
Install The Equipment
The Software Settings
Media Player
Clean And Maintain
Warranty Card
For best effects, it is recommended that you use this product in a dark room.
NOTICE
NOTICE
To prevent fire or electric shock, do not expose this machine to rain or moisture.
Do Not install in poorly ventilated places.Do Not install in hot or humid places.
Do Not block the ventilation holes. Do Not install in dusty or smoky places.
Projector Remote Controller User Manual Power Cord
Lens Cap Indicator
IR
Power
Lens
Power Input
USB
3.5mm Audio Out
AV
Ventilation Holes
Blurry Image
Adjustable Height Adjustable Angle
Projection Distance Reference
Projection Distance
"
"
"
"
"
"
"
M
M
M
M
M
M
M
Projection Size Projection Distance
M
How To Power Off
Install on the ceiling
Place it on the table Place it on the floor
Home Page
Projection Setting
Wi-Fi Setting
Signal direction USB drive
loudspeaker
Select a hotspot and enter a password to connect
Bluetooth Settings
Open Bluetooth and select pairing successfully
After-Sale Service Card
Customer Name:
Customer ID:
Customer Tel:
Customer Email:
Fault Description
(Please describe in detail for quick maintenance):
Press the signal input button on the remote control and
select USB device to turn it on.
You can play videos, music, or pictures from a storage
device in the following ways.
After the projector is turned on, insert a USB flash drive,
and the system will detect the external device by itself,
and a pop-up prompt will pop up. Select the type of file you want to play,
and press the "OK" button on the remote control panel to enter.
Remote Control Description
Thank you very much for purchasing our products.
Please check whether the physical products received are complete;
If the products and accessories you receive are not complete,
please contact the sales personnel in a timely manner.
(For specific items, please refer to the actual package.)
S A M E S C R E E N
Connect the projector and phone to the same network,
then open the HAPPYCast application and follow the prompts.
Return
Singnal source switching
Home
Right
Upward
Volume Up
Mute
Power
Volume Down
Menu
Enter
Left
Downward
Before focal length
After focal length
Tool
Power:To turn on/off the unit
After focal length:Adjust the lens focus backward
Tool:Open product settings function
Return：Back to previous menu or close the active window
Singnal source switching：Switching signals or opening removable disks
Home:Back to homepage
Volume +/-:Increase/Decrease the volume
Mute：To mute or unmute the projector speaker
Menu：To open the menu of applications or files
Enter：Choose/Click
Directional Keys:Use the up or down buttons
to select OSD items, use the left and right
button to make adjustments.
Before focal length:Adjust the lens focus forward
Focus: When the projection image is blurry
(as shown in the right figure),
adjust the focus adjustment button on the
remote control to move forward or backward
to achieve satisfactory imaging results.
If satisfactory clarity cannot be achieved
through adjustment,
please move the machine back and forth
appropriately.
IR
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
-
1
