Addonics Technologies DGC3 User manual

Brand
Addonics Technologies
Model
DGC3
Type
User manual

Addonics Technologies DGC3 is a 1:3 DVD/CD duplicator that allows you to create up to three copies of a DVD or CD at once. It has four buttons and an LCD on the panel that make it easy to operate, and it comes with a user manual that provides a full description of the various options. The DGC3 can copy DVDs and CDs of any size, and it can also erase rewritable DVDs. It is compatible with both Windows and Mac computers, and it comes with a one-year warranty.

Addonics Technologies DGC3 is a 1:3 DVD/CD duplicator that allows you to create up to three copies of a DVD or CD at once. It has four buttons and an LCD on the panel that make it easy to operate, and it comes with a user manual that provides a full description of the various options. The DGC3 can copy DVDs and CDs of any size, and it can also erase rewritable DVDs. It is compatible with both Windows and Mac computers, and it comes with a one-year warranty.

CONTACT US
1:3 DVD/CD Duplicator
Model: DGC3
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
www.addonics.com
There are four buttons and an LCD on the panel of duplicator.
1 – LCD shows a function or a message.
2 – it is used to scroll up function menus.
3 – it is used to scroll down function menus.
4 – it is used to execute a function.
5 – it is used to cancel a function.
Connecting the power cable and turning on the duplicator
a. Connect the power cord provided from the wall outlet to the back of the duplicator.
b. A main power switch is located at the back of the tower. Turn the switch on. Another auxiliary
power switch is located on the front of the tower.
Steps for the Copying Process (Note: may not able to copy-protected DVD or CD)
1. Turn on the duplicator by pressing the auxiliary power switch.
2. Insert media you wish to duplicate into the source tray on the top.
Overview
3. Turn on the duplicator by pressing the auxiliary power switch.
4. Insert media you wish to duplicate into the source tray on the top.
5. Populate the destination trays with blank CDs or DVD media. A rewritable DVD
containing old data can also be use, but the old data will be automatically
erased
6. After the DVD-ROM and DVD writers detect DVDs, press ENT button to start
copying
LCD will show the copying information as follows.
When copying is in progress, MB and time will decrease while the percentage of
completion will increase. “MB” means the size of data that you want to copy.
When copying comes to an end, LCD will show the results as follows. The DVDs that
were successfully copied will eject automatically.
Please review the duplicator controller user manual in
the included CD for a full description of the various
options. You may also download a copy from the
product web page
http://addonics.com/products/dgc3.php#tabs-5
COPY X3 4400M
97% 3.9X 4367M
RESULT:
PASS 3 FAIL 0
  • Page 1 1
  • Page 2 2

Addonics Technologies DGC3 User manual

Brand
Addonics Technologies
Model
DGC3
Type
User manual

Addonics Technologies DGC3 is a 1:3 DVD/CD duplicator that allows you to create up to three copies of a DVD or CD at once. It has four buttons and an LCD on the panel that make it easy to operate, and it comes with a user manual that provides a full description of the various options. The DGC3 can copy DVDs and CDs of any size, and it can also erase rewritable DVDs. It is compatible with both Windows and Mac computers, and it comes with a one-year warranty.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents