MODEL NO: KG12
Batch NO: PR3534
Rotating Vertical Rotisserie Grill
230V, 50Hz, 1400W
Please read and retain these instructions for future reference
Turn your backyard barbeque into a Mediterranean feast with your new Vertical Rotisserie Grill.
Simply load in the ingredients of your next dinner sensation, and let the grill do the hard work. Enjoy auto-rotating
gyros, and open-structured heating for a thorough, easy cooking experience every time.
Load on up to six skewers of your freshest meat and vegetables for mouth-watering kebabs, or secure a juicy
chicken into the grill and enjoy a delicious barbeque chicken feast.
The Vertical Rotisserie Grill is packed with a secure drip tray, as well as a 60 minute automatic switch off timer, so
your quick cooking results are as easy to clean as they are to prepare.
Add some unique, tasty additions to your cooking repertoire with your Vertical Rotisserie Grill.
IMPORTANT SAFEGUARDS
When using the vertical grill, please observe the following safeguards:
□ Please read these instructions carefully before using the appliance.
□ Check that your main voltage corresponds to the appliance.
□ Never immerse the appliance in water or any other liquid. Never place it into the dishwasher.
The removable skewers, grease residue tray, gear and shaft parts, bracket and screw, skewers holder and the
reflector are dishwasher safe.
□ Never leave the appliance unsupervised while in use. Keep out of reach of children or incompetent persons.
□ Unplug the vertical grill when it is not in use or when you want to assemble or disassemble it.
□ Do not use the appliance if cord or appliance shows any signs of damage. Should the cord be damaged, it must
be replaced by a competent qualified electrical goods repairer.
□ Never use accessories that are not recommended by the manufacturer. They could constitute danger to the
user and risk damage to the appliance.
□ Do not dangle the power cord and keep the area around the working surface clear.
□ Do not use the vertical grill near sources of heat (cooking tops, grill, oven).
□ Do not move the appliance when it is in use.
□ Never use the appliance outside and always place it in a dry environment.
□ Stand the appliance on a table or flat surface. Only use the appliance on a stable surface.
□ Although the appliance hardly splashes during use, it is advisable to put it on a stable surface which is easy to
clean.
□ Never move the appliance by pulling the cord. Make sure the cord will not get caught on anything. Do not wind
the cord around the appliance and do not bend it.
□ Only use the appliance for domestic purposes only and in the way indicated in these instructions.
□ Never try to repair the vertical grill by yourself. All repairs should be made by a competent qualified electrician or
by our repair service.
□ The skewers of this appliance are very sharp. Be extremely careful when cleaning the appliance, as otherwise
injury might incur.
□ You must always keep this appliance clean, as it is in direct contact with food.
□ Do not use the appliance together with a clock timer or a separate telecontrol system.
*The temperature of accessible surfaces will be high when the appliance is operating. Never touch the inside of
the appliance when it is operating. Do not touch the heating element while the appliance is operating or when it is
hot. Allow it to cool down before touching the appliance and parts. Take care when removing the skewers and food
after cooking.
DESCRIPTION
Gyros are piles of meat layers that are broiled by continuous rotation.
The broiling result is obtained by alternating heat temperatures and cooling down. This brings a constant inner
flow of gravy, comparable to the gravy obtained when roasting meat. The meat fibers do not harden and the gravy
is flavoured by the spices.
This cooking mode results in very healthy meat.
The skewers rotate in front of an open structure of heating elements with half round stainless steel reflectors for an
optimal use of energy.
The vertical grill allows broiling gyros meat layers, shashlik, kebabs, vegetables, poultry and fish with just a few
attachments. The meals are easy to prepare- simply put on the main skewers, cook, and remove by cutting the
meat into pieces, or by removing everything off the skewer at once. To operate the appliance, these instructions
need to be followed.
PRODUCT
Reflector Back body plate
OPERATION
1. Ta k e off the outer package parts of the appliance and clean the accessories with a wet cloth before using the
appliance.
2. Before the first use, you should heat up the appliance for about 5 minutes.
3. Plug in the appliance and switch it on. The heating system cleans itself every time you use the appliance.
4. After this first-time preheating, switch off and unplug the appliance.
ASSEMBLY
5. Position the Grease residue tray.
6. Add your food onto the central main shaft on the skewers holder or onto the skewers.
The main shaft is good to use for larger portions of meat, e.g. a roast chicken or roast beef, shawarma.
The sewers are good to use for smaller portions of meat, e.g.: shashliks, shish kebabs.
7. Add the skewers holder to the appliance.
Bracket of main rotating shaft
Gear and shaft parts
Skewers
Heating Element
Skewers holder
Switch
Grease residue tray
8. Insert Gear and shaft parts – bracket of main rotating shaft.
1). insert the gear into main skewer
2). Attach the long end of the bracket into the back-body plate
3). Line up the hole on the bracket so that it hooks under the raised piece on the gear.
4). Rotate the screw to lock the shaft into gear
During operation, if the skewers are not rotating, repeat this assembly and ensure that the shaft is fitted correctly
to the base of the unit and connected to the back-body plate.
9. Insert the skewers (which have food on them). Hook the top of the skewers to the gear and add the bottom of
the skewers to the holes in the skewers holder.
10. Plug in the appliance and switch it on to begin cooking.
CAUTION! Never use the appliance without reflector, ensure it is fitted correctly before operation.
CLEANING
Allow the appliance to cool down before disassembling it or cleaning it.
1. Disassemble “Gear and shaft parts” from the top of body
1) Undo the screw to unlock the bracket from the gear.
2) Remove the bracket from the gear and the back-body plate
2. Disassemble below parts for detailed clean.
The grease residue tray can be lifted up for removal from the appliance.
The reflector can slide up from the back-body plate to remove it for cleaning,
Before next use, ensure it has been fitted back into the appliance.
Do not use the appliances without the reflector added.
As after frequent use grease residues might burn on the reflector, we advise you to cover the reflector with tinfoil.
However, make sure that the foil does not come into contact with the heating elements. The tinfoil can be changed
according to the use frequency, which allows you to keep the reflector clean.
Never immerse the appliance in water or any other liquid. Never place it into the dishwasher.
The removable skewers, grease residue tray, gear and shaft parts, bracket and screw, skewers holder and the
reflector are dishwasher safe. The removable parts can be washed in warm water with washing detergent.
Environment
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate
waste disposal centre. The packaging material is recyclable. Dispose of the packaging in an environmentally
friendly manner and make it available for the recyclable material collection-service.
1. Grease residue tray
2. Skewers holder
3. Gear and shaft parts
4. Skewers
5. Reflector
-
1
-
2
-
3
-
4
-
5
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Steven Raichlen SR8025 User manual
-
Steven Raichlen SR8816 User manual
-
Roper Downdraft Slide-In 4347928 (333240-1) User manual
-
Thermador CGB36FZLP User manual
-
-
Salton GR59A Baby George User manual
-
George Foreman GR82B Owner's manual
-
HP 45WDG User manual
-
-
