- Agility Simple User Guide
- Agility Simple User Guide
Congratulations on the purchase of your Agility wireless security system.
To make the most of your system we advise you to take some time to read through this easy user
guide and also the accompanying user manual.
This user guide will focus on the different means of setting/ partial setting and un-setting your
security system.
- Agility Simple User Guide
Wireless Fobs
We offer two different types of wireless fobs for your security system; please see below a guide for
operating both.
4 button fob
8 Button Fob
Full Set Unset
Panic Button (If Programmed)
Part Set (If Programmed)
Unset
Full Set
Part Set (If Programmed)
% - Agility Simple User Guide
Keypad
There are two different modes of operation for using your system – Quick functions and secure
functions – your engineer will highlight the mode of operation below;
Operation
Quick Function
Secure function
Full Set
Press the ‘Lock key’
Press the ‘Lock k
ey’ and enter
your code OR present your tag
Part Set
Press the ‘Part Key’
Press the
‘Part Key’ and enter
your code
Unset
Press the ‘Unset Key’ and enter
your code OR present your tag
Press the ‘Unset Key’ and enter
your code OR present your tag
Panic (If Enabled)
Press the two
‘
phone buttons
’
together for 2 seconds.
Press the two
‘
phone buttons
’
together for 2 seconds.
*NOTE*
The keypad will enter a ‘sleep function’ after there has been no activity for a short period – to use any
of the above functions you will need to press ANY button on the keypad to ‘wake’ the keypad for use.
Customer using Quick Functions?
C
ustomer using Secure
Functions?
0 - Agility Simple User Guide
Wireless Slim line keypad
Risco offer wireless arming stations which can be used as a different mechanism for arming your
alarm system, the arming station can also be mounted outside of the property (only available on the
black arming station)
There are two different modes of operation for using your system – Quick functions and secure
functions – your engineer will highlight the mode of operation below;
Operation
Quick Function
Secure function
Full Set
Press the ‘Lock key’
Press the ‘Lock key’ and enter
your code OR present your tag
Part Set
Press the ‘Part Key’
Press the ‘Part Key’ and enter
your code OR present your tag
Unset
Press the ‘Unset Key’ and enter
your code OR present your tag
Press the ‘Unset Key’ and enter
your code OR present your tag
Panic (If Enabled)
Press the
‘Bell key’ for 2
seconds.
Press the
‘Bell Key’
for 2
seconds.
Customer using Quick Functions?
C
ustomer using Secure
Functions?
1 - Agility Simple User Guide
Smart Device
Please refer to ‘Risco App’ User guide for more information on how to use all features of the app.
*Note*
Depending on how many partitions you are using depends on how many ‘sliders’ will be present
*Note*
If you are using more than one partition and wish to set/part set/ unset a group of partitions as
opposed to each one individually you can simply press the required icon at the top (SET/PART SET/
UNSET) which will carry out the function for all partitions.
With All sliders set
under the ‘Unset’ icon,
all partitions are unset.
To ‘Full Set’ a partition
grab the required slider
and drag it under the
‘SET’ icon, then let go.
To ‘Part Set’ a partition
grab the required slider
and drag it under the
‘PART SET’ icon, then
let go.
4 - Agility Simple User Guide
Zone Listings and Contact Numbers
Zone
Location
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
Alarm Company – …………………………
Telephone Number –
Out of hours Number –
/
