Privileg PRBE 363W A+++ Program Chart

Brand: Privileg

Model: PRBE 363W A+++

Type: Program Chart

This manual is also suitable for

Privileg PRBE 363W A+++ is a refrigerator and freezer combination with advanced features for preserving and storing food. Its adjustable temperature settings, specialized compartments, and alarm systems ensure optimal conditions for various types of food. The fan-assisted cooling system distributes cold air evenly, maintaining consistent temperatures throughout the appliance. The antibacterial filter and additives in the crisper drawer help prevent bacterial growth, extending the freshness of fruits and vegetables.

on - off

1. Control panel

Refrigerator Compartment

2. Refrigerator compartment light ( LED system)

3. Fan

3a. on/off fan button

3b. cover of fan

4. Shelves / Shelf area*

5. Bottle rack*

6. Multi-flow cold air system

7. Sensor cover

8. Cooler compartment (best for meat and fish)*

9. Rating plate with commercial name

10. Fruits and vegetables crisper

11. Crisper divider*

12. Doors reversibility kit

13. Door trays

14. Bottle holder*

15. Egg tray*

16. Door seals

Freezer Compartment

16. Door seals

17. Upper basket for freezing fresh food or to store

frozen food

18. Ice tray and/or cold accumulator*

19. Storage baskets for frozen food items

Anti-bacterial protection

- Antibacterial filter* in the fan (3)

- Antibacterial additives* in the material of Crisper (10)

- Door seals are made of material able to inhibit

bacterial growth (16)

* Available on selected models

Notes:

- In case of power failure the cold accumulator helps

to keep optimal storage temperature longer.

- All shelves and door trays are removable.

- The internal temperatures of the appliance may be

affected by the ambient temperature, frequency of

door opening, as well as location of the appliance.

Temperature setting should take into consideration

these factors.

- The appliance accessories are not dishwasher safe.

- After inserting food, ensure that compartment doors

closes properly, especially the freezer door.

TO INCREASE STORAGE

The freezer compartment can be used without the

baskets to increase storage and for large products.

You can place the food products directly on the racks.

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically.

After starting the appliance, wait at least 4-6 hours

before placing food into the appliance.

When the appliance is connected to the power

supply, the display lights up and all the icons appear

on the display for approximately 1 second.

The default (factory) values of the freezer and

refrigerator compartment settings light-up.

FAN

The Fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation

of stored food.

By default, the fan is switched on.

It is advisable to keep the fan switched on, when the

ambient air temperature is above 27-28°C or if you

notice drops of water on the glass shelves or in sever

humidity conditions.

Please note that when the fan is switched on it will not

continuously work.

The fan will start/stop working depending on the

temperature and/or humidity level inside the fridge.

It is therefore absolutely normal if the fan does not

move even if the fan is switched on.

Note: Do not obstruct the air intake area with

food items.

To guarantee the right performance at lower ambient

temperature (colder than 18°C) and to minimize

Energy Consumption, turn off the fan.

To turn off the fan press the button (3a).

If the appliance has the fan it can be equipped with

the antibacterial filter.

Remove it from the box placed in the crisper drawer

(10) and insert into the cover of fan (3b).

The replacement procedure is attached with the filter.

PRODUCT SHEET

DK FINOSEGRITPTESNLFRGBDE

CONTROL PANEL

A. Fridge temperature LEDs

B. On/Stand-by icon/button

C. Freezer temperature LEDs

D. Fridge temperature / Fast Cool button

E. Black Out icon

F. Reset button / Alarm icon

G. Key Lock button

H. Freezer temperature / Fast Freeze button

FUNCTIONS

On/Stand-by

This function turns On/Stand-by both the

refrigerator and freezer compartments.

To put the product in Stand-by, press & hold the

On/Stand-by button for 3 seconds. All the icons

turn off except

On/Stand-by icon back light to

indicate that the appliance is in Stand-by. When

the appliance is in Stand-by, the light inside the

refrigerator compartment does not work.

Remember that this operation does not

disconnect the appliance from the power supply.

To switch the appliance on again, simply press

the

On/Stand-by button.

Fridge Temperature

To adjust the Fridge Temperature, press the

Fridge °C button. The Fridge Temperature can be

adjusted between +2°C and +8°C, as shown by

the Fridge Temperature LEDs.

Freezer Temperature

To adjust the Freezer Temperature, press the

Freezer °C button. The Freezer Temperature can

be adjusted between -16°C and -24°C, as shown

by the Freezer Temperature LEDs.

Fast Cool

Using Fast Cool function it is

possible to increase the cooling

in the refrigerator compartment.

The use of this function is

recommended when placing a

very high quantity of food in the

refrigerator compartment.

Press & hold for 3 sec. the

Fridge °C button to activate Fast

Cool function.

When activated, the Fast Cool

indication will be displayed by

the Fridge Temperature LEDs as

shown in the beside sequence.

The function is automatically disabled after 6

hours, or can be manually disabled by pressing

Fridge °C button.

Fast Freeze

The use of this function is

recommended when placing a

very high quantity of food to be

frozen in the freezer compartment.

24 hours before freezing fresh

food, press & hold for 3 sec. the

Freezer button to activate the Fast

Freeze function.

When activated, the Fast Freeze

indication will be displayed by the

Freezer Temperature LEDs as

shown in the beside sequence.

After 24 hours place the food

to be frozen in the upper basket of freezer

compartment.

The function is automatically disabled after

48 hours, or can be manually disabled by

pressing

Freezer °C button.

PRODUCT SHEET

DK FINOSEGRITPTESNLFRGBDE

Smart Display

This option function can be used to save energy.

To activate the Smart Display, press

Fridge °C

and

Freezer °C buttons at the same time for 3

seconds until the acoustic signal sounds.

Two seconds after activation of the Smart Display,

the display goes off.

To adjust the temperature or use other functions,

it is necessary to activate the display by pressing

any button. After about 15 seconds without

performing any action, the display goes off again.

When function is deactivated the normal display

is restored. The Smart Display is automatically

disabled after a power failure. Remember that

this function does not disconnect the appliance

from the power supply, but only reduce the power

consumed by external display.

Note: The declared appliance energy

consumption refers to operation with the Smart

Display function activated.

When the Smart display will be activated: all LEDs

on the display will turn off.

Key Lock

This function prevents anyone from inadvertently

changing settings or switching off the appliance.

To lock the keys, press Stop Alarm button

for

3 seconds until the display shows the Key Lock

indicator

and an acoustic signal confirms the

function has been selected. After 3s. indicator

goes off.

When activated, pressing the other buttons

(except Stop Alarm button) activates an audible

signal and on display flashes the Key Lock

indicator

. Any alarm can be deactivated when

Key Lock function is active.

To unlock the keys, follow the same procedure

until the display shows the Key Lock indicator

and an acoustic signal confirms the function has

been disengaged. After 1s. indicator

goes off.

PRODUCT SHEET

MALFUNCTION AND ALARM INDICATIONS:

ALARMS

TABLE

Signal Cause Cure

Door open

alarm

The acoustical alarm is activated

and the alarm icon flashes

The door has remained

open for more than

2 minutes

Close the door

Temperature

alarm

The acoustical alarm is activated,

5 Freezer Temperature LEDs

blinks and the alarm icon

remains on

The inside temperature is

not adequate

Press the button

; the acoustical

alarm stops, 5 Freezer Temperature

LEDs blinks and the red light

remains on until a temperature

< -10°C is reached

Long black-

out alarm

The acoustical alarm is activated,

the light

remains on and the

light flashes.

Prolonged power failure,

able to cause the inside

temperature to increase

to 0°C

Press the button

; the acoustical

alarm stops

Malfunction The acoustical alarm is activated,

3 central Fridge Temperature

LEDs flashes on the display and

the alarm icon

remains on

Product malfunction Contact the After-sales Service and

specify the number of LEDs’ flashes

Door open alarm

The Alarm icon lights up blinking and the

acoustic alarm sounds.

The alarm is activated when the refrigerator’s

door is left open for more than 2 minutes. To

disengage the door alarms close the door or

press once

Stop Alarm to mute the acoustic

alarm.

Temperature alarm

The acoustic alarm sounds and all the 5 Freezer

Temperature LEDs blinks.

The alarm is activated when:

• Theapplianceisconnectedtothepowersupply

after prolonged disuse

• Thefreezercompartmenttemperatureistoo

high

• Thequantityoffoodsloadedintothefreezer

exceeds that indicated on the rating plate

• Thefreezerdoorhasbeenleftopenforalong

time

• To mute the alarm buzzer press

Reset button

just once.

• The

Alarm Icon is automatically turned-off

as soon as the freezer compartment reaches

a temperature below -10°C and the Freezer

Temperature LEDs stop blinking and shows the

chosen setting.

DK FINOSEGRITPTESNLFRGBDE

PRODUCT SHEET

Black Out Alarm

After a power blackout, your product is designed

to automatically monitor the temperature in

the freezer when electricity is resupplied. If the

temperature in the freezer rises above freezing

level, the

Black Out icon lit the Alarm Icon

blinks and the acoustical alarm sounds when

electricity is re-supplied. To reset the alarm press

the

Reset button just once.

In case of Black Out Alarm, the following actions

are recommended:

• Ifthefoodinthefreezerisunfrozenbutstill

cold, all the food in the freezer should be moved

to the fridge compartment and eaten within the

next 24 hours.

• Ifthefoodinthefreezerisfrozen,thisindicates

the food was thawed and then refrozen when

electricity was re-supplied which degrades

taste, quality and nutritional value and also

could be unsafe. It is recommended to not

consume the food but to dispose of the entire

content of the freezer.

The Black Out Alarm is designed to provide

guidance on food quality in the freezer in the

event of electricity black out. This system

does not guarantee food quality or safety

and consumers are advised to use their own

judgment in evaluating food quality in freezer and

refrigerator compartments.

CLEANING

Regularly clean the appliance using a cloth and a

solution of warm water, with some soft detergent

suitable for cleaning the inside of the refrigerator

compartment.

Do not use abrasive detergents or tools.

To ensure continuous and correct flow of defrost

water, regularly clean the inside of the draining hole

on the back of the refrigerator near the fruit and

vegetable drawer, using the tool provided .

Before carrying out any cleaning or maintenance

operation, unplug the appliance or disconnect it from

the power supply.

DEFROSTING THE

REFRIGERATOR COMPARTMENT

Refrigerator compartment defrosting is completely

automatic.

Droplets of water on the rear wall inside the

refrigerator compartment indicate that the automatic

defrost phase is in progress. The defrost water is

automatically run into a drain hole and collected in a

container, where it evaporates.

DEFROSTING THE

FREEZER COMPARTMENT

The freezer should be defrosted once

or twice a year or when excessive

frost is present (3 mm thickness).

The formation of frost is normal.

The amount and rate at which frost

accumulates depends on room

conditions and how often the door is open.

To defrost the unit, switch off the whole appliance and

remove all food products.

Leave the freezer door open to allow the frost to melt.

Pull out the defrost water drain and place a container

under the drain (see figure).

When the operation is completed, put back the

defrost water drain.

Clean the inside of the freezer. Rinse and dry

thoroughly. Switch the whole appliance, back on and

store the food inside.

LED’s LIGHTING

If the inside LED light is not working, it must be

replaced by service.

Important:

The refrigerator compartment light switches on when

the refrigerator door is opened. After 10 minutes of

door opening the light switches off.

5019 620 00031 Printed in Italy 05/13

DK FINOSEGRITPTESNLFRGBDE

Privileg PRBE 363W A+++ Program Chart

Brand: Privileg

Model: PRBE 363W A+++

Type: Program Chart

This manual is also suitable for

Download PDF

report

Privileg PRBE 363W A+++ Program Chart

This manual is also suitable for

Privileg PRBE 363W A+++ Program Chart

Related papers

Other documents