2. Home
  3. Domestic appliances
  4. Floor care
  5. Vacuum cleaners
  6. Kogan
  7. E8

Kogan E8, KAVACSTE08A User manual

  • Hello! I am an AI chatbot trained to assist you with the Kogan E8 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
E8 CORDED STICK
VACUUM CLEANER
KAVACSTE08A
When using an electrical appliance basic safety precautions should always be followed
including the following:
• Read all instructions.
• Children aged 8 years and above or persons with reduced physical, sensory or
mental capabilities should only use this appliance while under supervision or
instruction from an adult or carer.
• Children aged 8 and above should not clean or perform user maintenance on this
appliance unless under supervision or instruction from an adult or carer.
• Do not operate any appliance with a damaged or abnormal cord or plug. If the
main cord is damaged, it must be replaced by Kogan.com or a service agent on
Kogan.com's behalf.
• Do not turn off the appliance by pulling the power cable out of the power socket.
• Do not vacuum burning cigarettes, water and other liquids, sharp or heavy objects.
• Do not leave this appliance near any sources of heat.
SAFETY & WARNINGS
1
Tu b e c o n n e c t i o n
7
Dust tank
2
Dust tank removal button
8
2-in-1 brush head
3
Power button
9
Floor brush
4
Handle
10
Metal tube
5
Filter
11
Power cord
6
Dust tank door release
OVERVIEW
Start-up
Configuration 1
1. Insert the 2-in-1 brush head (1) or floor brush (2) into the tube connection (3).
2. 2-in-1 brush head: Use this brush to clean upholstered surfaces, keyboards, lamps,
curtain, blinds, vents, etc. Perfect for cleaning hair and dust on fabric. Use the
crevice portion for the normal cleaning tasks. To switch between brush and crevice
portion, pull the brush section in the direction of the arrow until it locks in place.
Configuration 2
1. Insert the metal tube (1) and floor brush (2) into the tube connection (3). This
configuration is best for cleaning floors, carpet and smooth surfaces.
INSTALLATION
1. Plug the vacuum into the power socket, press the power button, the vacuum will
turn on.
2. After cleaning, press the power button again and the appliance will turn off.
3. Disconnect from the power outlet and store the appliance away.
OPERATION
Cleaning the Dust Tank and Filters
Before performing any maintenance, please ensure the vacuum is turned off and
disconnected from the power outlet.
Please use a dry soft cloth to clean the appliance and accessories.
1. Press the dust tank door release button (1) to open the bottom cover on the dust
tank and empty any dust.
2. Press the dust tank removal button (1) and remove the dust tank (2).
Note:
Clean the dust tank and filters monthly to maintain the performance.
3. Tw i s t th e du s t tank counter-clockwise to open the container and remove both the
filters.
4. Shake the filter to remove any dust and replace if necessary.
Before First Use
Unpack the appliance and any accessories. Dispose of the packing materials.
Ensure all packing material around the appliance and the protective elements
inside the appliance compartments are removed prior to first use.
• Carton board and the sheets of paper included are recyclable. They must be
disposed of in the appropriate recycle bin.
• Materials bearing the symbol are recyclable:
PE = Polyethylene; PS = Polystyrene; PP = Polypropylene
They must be disposed of in the appropriate recycle bin.
• Any other packaging material (adhesive, fasteners, etc.) must be disposed of with
regular household waste.
DISPOSAL
Power
500W
Voltage
240V
Frequency
50Hz
Noise
<78dB
Vacuum
>12Kpa
If you encounter a problem with your device or if you suspect the device is not working
properly, you can make a few simple checks before contacting Kogan.com.
Problem
Solution
The vacuum does not power on
Check that the power cord is properly
plugged in to power outlet and switched on.
Loss of suction
Check to see if the openings are clogged.
Unplug and clean if necessary.
Make sure the filters are correctly installed.
Empty the dust tank and clean the filters.
Everything seems ok after checks, but the
vacuum still will not power on
Please contact Kogan.com
TROUBLESHOOTING
SPECIFICATIONS
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
/