2. Accel Instruments
  3. TS200

Accel Instruments TS200 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Accel Instruments TS200 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide
Battery Simulator
Step 1-A: Plug in the AC power cord (not shown)
Step 1-B: Turn on the TS200 by press the
LINE button
Step 1-C: Enable the output by press the
ON/OFF button
Step 2: Turn the OFFSET knob to set the simulated battery voltage (e.g. 3.8V)
BATTERY
CHARGER
1.01
A
Optional DMM for
Measure Current
Step 3: Connect the battery charger to the TS200 OUTPUT
Vary the voltage to observe
the charging current
Accel Instruments
www.accelinstruments.com
Quick Start Guide
Amplifying Current or Voltage
Step 1-A: Plug in the AC power cord (not shown)
Step 1-B: Turn on the TS200 by press the
LINE button
Step 1-C: Enable the output by press the
ON/OFF button
Step 2: Turn the OFFSET knob to set the DC voltage (e.g. 0V)
Accel Instruments
www.accelinstruments.com
Load
or
DUT
Function Generator
Sinewave
Current or Voltage Amplifier Connection Diagram
100kHz
SINE
/