Accel Instruments TS200 Quick start guide

Brand
Accel Instruments
Model
TS200
Type
Quick start guide
Quick Start Guide
Battery Simulator
Step 1-A: Plug in the AC power cord (not shown)
Step 1-B: Turn on the TS200 by press the
LINE button
Step 1-C: Enable the output by press the
ON/OFF button
Step 2: Turn the OFFSET knob to set the simulated battery voltage (e.g. 3.8V)
BATTERY
CHARGER
1.01
A
Optional DMM for
Measure Current
Step 3: Connect the battery charger to the TS200 OUTPUT
Vary the voltage to observe
the charging current
Accel Instruments
www.accelinstruments.com
Quick Start Guide
Amplifying Current or Voltage
Step 1-A: Plug in the AC power cord (not shown)
Step 1-B: Turn on the TS200 by press the
LINE button
Step 1-C: Enable the output by press the
ON/OFF button
Step 2: Turn the OFFSET knob to set the DC voltage (e.g. 0V)
Accel Instruments
www.accelinstruments.com
Load
or
DUT
Function Generator
Sinewave
Current or Voltage Amplifier Connection Diagram
100kHz
SINE
  • Page 1 1
  • Page 2 2

Accel Instruments TS200 Quick start guide

Brand
Accel Instruments
Model
TS200
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents