Page is loading ...
Interlink LED Lighting
Installation and connecting
HD714072
Installation
INTLE38
NOTE: Ensure packaging is disposed of in a safe
environmentally friendly way
This product is designed to be connected by the power cable
INT3837 (3 amps, 220-240v). Optional interlink cables for this
item are INT3838 or 3830 - all these are purchased separately.
All connectors are factory fitted and we do not recommend that
any modifications or changes are made to the designed product.
Horizontal Fixing
Connecting
Vertical Fixing
Secure the brackets to the underside
of the cabinet using the screws
provided.
Clip the light into position.
x2
x2
Connect the lights together as
required.
Application example
Clip the light into position.
Secure the brackets to the underside
of the cabinet using the screws
provided.
IMPORTANT
• Please read these instructions carefully before commencing any work
• Please retain this leaflet for future references
• This product must be installed by a qualified electrician in accordance
with the current IEE wiring regulations
• To prevent electrocution, switch the power off at the mains supply
before installing or maintaining this fitting
• Never leave the pins exposed as this poses an electric shock hazard
• Ensure others cannot restore the electrical supply without your knowledge
Care in Use
• Please note that this fitting has non-replaceable parts
• Always switch-off or disconnect from the mains when cleaning the product
• We recommend cleaning with a soft dry cloth
• Do not use scours, abrasives or chemical cleaners
/