Page is loading ...
Silver Mobile TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv22s
SKU: STAND-TV22S
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
WARNING!
A (x1)
Base
B (x1)
Le Leg
C (x1)
Right Leg
I (x1)
Right Column
J x1)
Le Adapter
Bracket
K (x1)
Right Adapter
Bracket
L (x2)
Top Cover
H (x1)
Le Column
E (x1)
Right Cover
F (x1)
Universal
Plate
G (x2)
Plastic
Handle
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
N (x1)
Connecting
Plate
M (x1)
DVD Shelf
M-F (x4)
Washer
M-G (x8)
Small Spacer
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-D (x4)
M8x30
M-C (x4)
M6x30
D (x1)
Le Cover
M-H (x8)
Large Spacer
O (x1)
Camera Shelf
P x1)
Support Bar
Q (x2)
Knob
R (x2)
M6x25
T (x3)
M4x6 Flathead
Screw
S (x4)
M6x16
U (x2)
M4x6
V x2)
M6x25
W (x6)
M6x14
X (x8)
M8x25
Z (x1)
Allen Wrench
Y (x2)
M6x25
A1 (x1)
Wrench
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
Insert the base (A) into the le leg (B). Align the mounting holes and secure with M6x16 bolts (S).
Repeat this step for the right leg (C). Adjust caster height if needed by loosening the nut with the
wrench (A1).
STEP 2
Loosen screws on each side of columns (H, I) using the Allen wrench (Z) to adjust height to desired
level, then tighten. (CAUTION: Hold inner column when loosening for adjustment). Ensure both
columns are at the same height using the height indicators as guides.
S
Z
B
A
C
A1
Z
Z
I
220lbs
(99.79kg)
11lbs
(5kg)
TV DVD CAMERA
4
STEP 2 (Continued)
Place the columns (H, I) into the cutouts in the base. Slide the plastic handles (G) over the inner
columns and press firmly in place. NOTE: Lock the casters in place to prevent movement during
assembly. Secure columns using M8x25 bolts (X) and tighten with Allen wrench (B1).
STEP 3
Attach the support plates on the
universal plate (F) to the columns
with M6x14 bolts (W). Tighten
bolts using a screwdriver. Attach
plastic covers (L) to the top of the
columns. Secure columns using
M8x25 bolts (X) and attach plastic
cover (D,E) to the base. Tighten
M6x25 safety bolts (R) into the
back of each column.
G
H
I
5
STEP 4
STEP 3 (Continued)
Attach the DVD shelf (M) to the support
bar (P) with M6x14 bolts (W), M6x25
carriage bolts (Y) and knobs (Q). Adjust
the shelf to the desired height before
installing the display to the stand.
OPTION A: Flat Back Screen
Install adapter brackets (J, K) to back
of each display using screws (M-A,
M-B) and washers (M-F).
OPTION B: Curved Back Screen
Install adapter brackets (J, K) to back
of each display using screws (M-C, M-D,
M-E), washers (M-F) and spacers (M-G,
M-H) as shown in the diagrams.
Q
Y
W
P
Z
supporting bloc k
Z
V
Z
M-A/M- B
M-F
TV
TV
TV
ç ê
ç ê
ç ê
M-E
M-F
M-H
M-H
M-C/M- D
M-F
M-H
M-G
M-E
M-F
M-H
M-G
M-E
M-F
M-H
M-G
ç ê
ç ê
M-C
M-D
M-C
M-D
M-F
M-F
M-H
M-G
TV
TV
TV
6
STEP 5
Hang the adapter brackets (J, K) with display onto the universal plate (F). Turn the bolts on the
underside of the brackets counter-clockwise to lock. Rotate the bolts clockwise to unlock. A padlock
(not included) can be used to prevent the display from being stolen. IMPORTANT: Make sure the
display is correctly mounted before releasing the display.
STEP 6
Run through cable management slots.
C
7
STEP 7
Attach the camera shelf (O) to the connecting plate (N) using M4x6 flat head bolts (T) on top and M4x6
dome head bolts (U) in back.
STEP 8
Remove the bolts from the
center of the universal plate
(F). Attach the connecting plate
(N) to the universal plate at
the desired height using the
previously removed bolts.
T
O
U
.
LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
/